Bakers Pride HFW - Manuals - manualsarea.com

Page 2 - Warranty Information

Warranty Information LIMITED ONE YEAR WARRANTY BKI (The "Company") warrants to the original purchaser that at time of shipment from the Company factory, this equipment will be free from defect in materials and workmanship. Written notice of a claim under this warranty must be received by the...

Page 3 - Table of Contents

BKI Fry Warmer Table of Contents 1 Table of Contents Table of Contents .................................................................................................................................................... 1 Introduction ....................................................................

Page 4 - Introduction; Safety Precautions

BKI Fry Warmer Introduction 2 Introduction Congratulations! You have chosen a Fry Warmer that will give you many years of fine service from the original manufacturer, BKI. The BKI name and trademark on this unit assures you of the finest in design and engineering — that it has been built with care a...

Page 6 - Safety Labels

Page 7 - Installation; Instructions For Shipping Damage

BKI Fry Warmer Installation 5 Installation Serious injury, equipment damage or death could result if attempting to install this unit yourself. Ensure that an authorized BKI service agent install the oven. Instructions For Shipping Damage You are responsible for filing all freight claims with the del...

Page 8 - Operation; Unit Startup and Preheating; Unit Shutdown

BKI Fry Warmer Operation 6 Operation Unit Startup and Preheating 1. Turn on power to the unit. 2. Allow the equipment to preheat for ten (10) minutes before loading it with product. Operational Guidelines  Foods should be a minimum of 195  F. before being placed in the warmer.  Foods loaded in fi...

Page 9 - Maintenance; Scheduled Maintenance

BKI Fry Warmer Maintenance 7 Maintenance Failure to comply with the maintenance below could result in a serious accident. Electrocution, equipment failure or property damage could result if an unlicensed electrician performs electrical repair. Ensure that a licensed electrician perform electrical re...

Page 13 - Troubleshooting

BKI Fry Warmer Maintenance 11 Troubleshooting Refer to the table below for troubleshooting information. Problem Cause Possible Solution Package Holding Area is not holding heat Ceramic heating element failure Contact an authorized BKI service agent for corrective action. Noisy fan Fan blade is dirty...

Page 14 - Repair

BKI Fry Warmer Maintenance 12 Repair Before replacing any parts, make sure the power has been turned off and the unit has cooled down. Lamp Replacement Only use Teflon-coated lamp to prevent glass contamination. 1. Make sure power to the unit is OFF and the unit has cooled down. 2. Carefully remove ...

Page 15 - Notes