Bakers Pride FW-15L - Manuals

Page 2 - Warranty Information

Warranty Information LIMITED ONE YEAR WARRANTY BKI (The "Company") warrants to the original purchaser that at time of shipment from the Company factory, this equipment will be free from defect in materials and workmanship. Written notice of a claim under this warranty must be received by the...

Page 3 - Table of Contents

Sandwich/Fry Warmer Table of Contents 1 Table of Contents Table of Contents .................................................................................................................................................... 1 Introduction ...............................................................

Page 4 - Introduction; Safety Precautions

Sandwich/Fry Warmer Introduction 2 Introduction Congratulations! You have chosen a Sandwich/Fry Warmer that will give you many years of fine service from the original manufacturer, BKI . The BKI name and trademark on this unit assures you of the finest in design and engineering — that it has been bu...

Page 5 - Safe Work Practices

Sandwich/Fry Warmer Introduction 3 Safe Work Practices Beware of High Voltage This equipment uses high voltage. Serious injury can occur if you or any untrained or unauthorized person installs, services, or repairs this equipment. Always Use an Authorized Service agent to Service Your Equipment. Kee...

Page 7 - Safety Labels

Page 8 - Operation; Controls and Indicators

Sandwich/Fry Warmer Operation 6 Operation Controls and Indicators

Page 9 - Unit Startup and Preheating

Sandwich/Fry Warmer Operation 7 Item # Description Function 1 Upper Sandwich Warmer TOP HEAT temperature control Controls the temperature of the Upper Sandwich Warmer ceramic heaters. 2 Upper Sandwich Warmer TOP HEAT pilot light Cycles on and off to indicate when the Upper Sandwich Warmer ceramic he...

Page 10 - Sandwich Warmer Temperature Adjustment

Sandwich/Fry Warmer Operation 8 FW-15L 1. Connect the plug of the power cord into a receptacle that matches the power rating specified on the rating tag. 2. Place the Fry Warmer ON/OFF switch to the ON (1) position. The switch should illuminate red, the bulb should light and the chute and perforated...

Page 11 - Installation; Instructions For Shipping Damage

Sandwich/Fry Warmer Installation 9 Installation Instructions For Shipping Damage You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for damage when they arrive. If there is damage noted to shipping crates or cartons, or, if a shortage is ...

Page 15 - Maintenance; Scheduled Maintenance; SFW Cleaning

Sandwich/Fry Warmer Maintenance 13 Maintenance Failure to comply with the maintenance below could result in a serious accident. Electrocution, equipment failure or property damage could result if an unlicensed electrician performs electrical repair. Ensure that a licensed electrician perform electri...

Page 16 - Troubleshooting

Sandwich/Fry Warmer Maintenance 14 4. Allow the equipment to cool to room temperature. 5. Remove and clean the Fry Warmer blower pan and pan insert. 6. Clean around the slotted holes at the air discharge on the blower box. 7. Clean the air intakes using a mild soap and water solution. 8. Sponge the ...

Page 17 - Repair

Sandwich/Fry Warmer Maintenance 15 Repair Before replacing any parts, make sure the power has been turned off and the unit has cooled down. Lamp Replacement Only use Teflon-coated lamp to prevent glass contamination. 1. Make sure power to the unit is OFF and the unit has cooled down. 2. Carefully re...

Page 18 - Notes