Page 3 - Mount the PS-24 box using the supplied holders; Using the appropriate screws for the wall material
PS-24 Mains Adaptor EN GLISH Mount the PS-24 box using the supplied holders Package contents: a) 4 holdersb) 4 wood screwsc) 4 screws for holdersd) 4 concrete plugs (5mm drill) e) 4 concrete screws Using the supplied screws (c), attach the plastic holders (a) to the PS-24 box. Using the appropriate ...
Page 4 - Alternative installation - PSU box
PS-24 Mains Adaptor Alternative installation - PSU box The vandal-proof PSU box is an optional accessory which can be mounted either on a pole or on a flat surface. 1. Remove the top lid of the PSU box by removing the 4 screws. 2. Place the PS-24 with the 4 cable glands in the opening at the bottom ...
Page 5 - PS-24 Mains Power Adaptor; Cables
PS-24 Mains Adaptor EN GLISH PS-24 Mains Power Adaptor Important! • Warning - high voltage. Read through the instructions before starting the installation. The electrical connection should be made by an authorized electrician. Please observe relevant national and local regulations for the installati...
Page 6 - Connect power to the PS-24
PS-24 Mains Adaptor Connect power to the PS-24 1. Remove the lid of the power supply by removing the 4 screws. 2. Make sure the power switch is set to ‘0’ (off). Important! The power switch does not break on both poles at the AC input. The power switch shall only be used to turn the camera on/off. W...
Page 7 - Connect the AXIS 231D/232D power and alarm inputs/outputs; the AXIS 231D/232D Installation Guide for further instructions.
PS-24 Mains Adaptor EN GLISH Connect the AXIS 231D/232D power and alarm inputs/outputs This document describes how to install the AXIS 231D/232D and the PS-24. Please refer to the AXIS 231D/232D Installation Guide for further instructions. Connect the dome camera to the power supply and alarm inputs...
Page 8 - Connect the AXIS 225FD power and alarm input/output; Mains Power Adaptor page.
PS-24 Mains Adaptor Connect the AXIS 225FD power and alarm input/output This document describes how to install the AXIS 225FD and the PS-24. Please refer to the AXIS 225FD Installation Guide for further instructions. Connect the camera to the power supply and alarm input/output* (cables not supplied...
Page 10 - Alternative Installation – PSU-Gehäuse
PS-24-Versorgungsnetzteil Alternative Installation – PSU-Gehäuse Das zerstörungssichere PSU-Gehäuse (optionales Zubehör) kann auf glatten Oberflächen und an Masten montiert werden. 1. Lösen Sie zum Öffnen des PSU-Gehäuses die 4 Befestigungsschrauben. 2. Legen Sie das PS-24-Netzteil so in das PSU-Geh...
Page 12 - PS-24 an das Stromnetz anschließen; Netzwerkkamera finden Sie in der Montageanleitung zur Kamera.
PS-24-Versorgungsnetzteil PS-24 an das Stromnetz anschließen 1. Lösen Sie zum Öffnen der Gehäuseklappe die 4 Befestigungsschrauben. 2. Schalten Sie den Netzschalter auf ‚0‘ (Aus). Wichtig! Der Netzschalter unterbricht nicht beide Pole des Wechselstromeingangs. Er dient lediglich zum Aus-/Einschalten...
Page 13 - Versorgungs- und Signalleitungen für AXIS 231D/232D anschließen; Verbinden Sie die Kuppelkamera mit der Stromversorgung und den
PS-24-Versorgungsnetzteil DEUTSCH Versorgungs- und Signalleitungen für AXIS 231D/232D anschließen In diesem Dokument wird die Montage der Modelle AXIS 231D/232D und PS-24 beschrieben. Weitere Hinweise finden Sie in der Installationsanleitung zu AXIS 231D/232D. Verbinden Sie die Kuppelkamera mit der ...
Page 14 - Versorgungs- und Signalleitungen für AXIS 225FD anschließen
PS-24-Versorgungsnetzteil Versorgungs- und Signalleitungen für AXIS 225FD anschließen In diesem Dokument wird die Montage der Modelle AXIS 225FD und PS-24 beschrieben. Weitere Hinweise finden Sie in der Installationsanleitung zur AXIS 225FD. Verbinden Sie die Kamera mit der Stromversorgung und den S...
Page 16 - AXIS COMMUNICATIONS
AXIS COMMUNICATIONS <Product Name> Quick User’s Guide PS-24 Power Supply Installation Guide Rev. 2.10 Part No. 26537