Axis AXIS P1343 - Manual

AXIS P1343 Network Camera Hardware overview Connectors Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet (PoE). Caution To protect the product against power surges, a shielded network cable (STP) must be used between the product and the network switch. Ensure that the networ...

AXIS P1343 Network Camera Hardware overview • Digital input — An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown...

AXIS P1343 Network Camera Hardware overview Green Normal operation. Power Amber Flashes green/amber during fi rmware upgrade. Note • The Status LED can be con fi gured to be unlit during normal operation. To con fi gure, go to Setup > System Options > Ports & Devices > LED . See the onl...

AXIS P1343 Network Camera Accessing the product Accessing the product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Mac...

AXIS P1343 Network Camera Accessing the product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must con fi gure your network router to allow incoming data traf fi c to the product. To do this, enable th...

AXIS P1343 Network Camera Accessing the product Note • The default administrator user name root is permanent and cannot be deleted. • If the password for root is lost, the product must be reset to the factory default settings. See Reset to factory default settings, on page 47 . The Live View page If...

AXIS P1343 Network Camera Accessing the product AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 14 for more information. The toolbar displays the following buttons: The Play button connects to the A...

AXIS P1343 Network Camera Media streams Media streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audi...

AXIS P1343 Network Camera Media streams The AMC Control Panel can be used to con fi gure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on fi rst use, after which it can be con fi gured. Open th...

AXIS P1343 Network Camera Media streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later.• QuickTime adds latency to the video stream.• It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Acc...

AXIS P1343 Network Camera Setting up the product Setting up the product The Axis product can be con fi gured by users with administrator or operator rights. Click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have acc...

AXIS P1343 Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can con fi gure the following: • Video stream settings. See page 18 . • Stream pro fi les. See page 19 . • Camera settings. See page 20 . • View area. See page ...

AXIS P1343 Network Camera Video and Audio • Video & Audio > Video Stream . Under Preview , click Open and select the Show pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter the number of pixels in the Width and Height fi elds an...

AXIS P1343 Network Camera Video and Audio • To select the default stream pro fi le go to Live View Con fi g > Stream Pro fi le and choose the pro fi le from the drop-down list. For more information see the online help on this page. Camera Settings The Video & Audio > Camera Settings page p...

AXIS P1343 Network Camera Video and Audio Day/Night The IR cut fi lter prevents infrared (IR) light from reaching the image sensor. In poor lighting conditions, for example at night, or when using an IR lamp, set the IR cut fi lter to Off . This increases light sensitivity and allows the product to ...

AXIS P1343 Network Camera Video and Audio To use your own image, such as a logo, fi rst upload the image to the Axis product. Go to Video & Audio > Overlay Image , click Browse to locate the fi le and then click Upload . The fi le can then be selected from the Use overlay image drop-down list...

AXIS P1343 Network Camera Video and Audio Half-duplex - Audio can be transmitted in both directions between the Axis product and the client computer, but only in one direction at a time. You must actively receive sound using the Talk/Listen button visible in the Live View page (see AXIS Media Contro...

AXIS P1343 Network Camera Video and Audio Audio Output An external speaker can be connected to the product’s Audio-out connector. The output can be used with high impedance headphones or connected to another ampli fi er with speakers. Con fi gure the audio output settings under Video & Audio >...

AXIS P1343 Network Camera Live View Con fi g Live View Con fi g You can customize the Live View page and alter it to suit your requirements. It is possible to de fi ne the following features of the Live View page. • Stream Pro fi le. See page 19 . • Default Viewer for Browser. See page 25 . • Viewer...

AXIS P1343 Network Camera Live View Con fi g Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG) QuickTime H.264 Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher •...

AXIS P1343 Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a prede fi ned view that can be used to quickly steer the camera to a speci fi c location. Preset positions can be accessed in several ways: • By selecting the preset from the Preset positions dro...

AXIS P1343 Network Camera PTZ (Pan Tilt Zoom) 4. Select an available preset position and click Apply . 6. Specify the View Time in seconds or minutes. 7. Specify the View order or select the Random view order check box option. 8. Click Save . To modify or remove guard tours, go to PTZ > Guard Tou...

AXIS P1343 Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To con fi gure tampering: 1. G...

AXIS P1343 Network Camera Detectors Set up motion detection To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection . 2. Select the Con fi gure Included Windows option and click New . Select the new window in the list of windows and enter a de...

AXIS P1343 Network Camera Detectors Recommended values 5–15% 60–90% 75–95% Default values 15% 90% 90% Tips: • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select...

AXIS P1343 Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. For information about available applications, downloads, trials and licenses, go to www.axis.com/applications To upload an application, go to Applications > Overview ...

AXIS P1343 Network Camera Events Events The Axis product can be con fi gured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that de fi nes how and when the action is triggered is called an Action Rule . The action rule wi...

AXIS P1343 Network Camera Events 5. Set one of the available pre-programmed time intervals from the Schedule drop-down list. 6. Select Send Noti fi cation from the Type drop-down list. 7. Select where to send the noti fi cation from the Recipient drop-down list. To add additional criteria, select th...

AXIS P1343 Network Camera Recordings Recordings The Axis product can be con fi gured to record video continuously or according to an action rule: • To start a continuous recording, see page 36 . • To set up action rules, see page 33 . • To access recordings, see Recording List, on page 36 . • To con...

AXIS P1343 Network Camera System Options System Options Security Users User access control is enabled by default and can be con fi gured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anony...

AXIS P1343 Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1...

AXIS P1343 Network Camera System Options To change the date and time settings, select the preferred Time mode under New Server Time : • Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatica...

AXIS P1343 Network Camera System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to fi nd a local AVHS Service Provider go to www.ax...

AXIS P1343 Network Camera System Options Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be chan...

AXIS P1343 Network Camera System Options The following traps are available: • Cold start • Warm start • Link up • Authentication failed SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be enabled, s...

AXIS P1343 Network Camera System Options If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair . To avoid fi lling the card, it is recommended to remove recordings continuously. Under Recording Settings , select Remove recordings older than and...

AXIS P1343 Network Camera System Options • the default router • the subnet mask • the system time • the IEEE 802.1X settings • the focus position Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product ca...

AXIS P1343 Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. Caution Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you u...

AXIS P1343 Network Camera Troubleshooting Troubleshooting Checking the fi rmware Firmware is software that determines the functionality of network devices. One of your fi rst actions when troubleshooting a problem should be to check the current fi rmware version. The latest version may contain a cor...

AXIS P1343 Network Camera Troubleshooting arp -s <IP address> <serial number> tempping -s 408 <IP address> In Windows , type the following from a command/DOS prompt: arp -s <IP address> <serial number>ping -l 408 -t <IP address> 2. If the product does not reply wi...

AXIS P1343 Network Camera Technical Speci fi cations Function/group Item Speci fi cations Casing Metal (zinc) Processor, memory ARTPEC-3, 128 MB RAM , 128 MB Flash Power 8-20 V DC or Power over Ethernet (PoE) IEEE 802.3af, max. 6.4 W, PoE Class 2 Connectors RJ-45 10BASE-T/100BASE-TX PoE Terminal blo...