Axis M3007P - Manual

AXIS M3007–P Hardware Overview NO NO NOTICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shallbe intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’si...

AXIS M3007–P Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari with Macintosh and Firefox w...

AXIS M3007–P Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 53 . To set the password via a standard HTTP connect...

AXIS M3007–P Access the Product Controls on the Live View Page Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream pr...

AXIS M3007–P Access the Product Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view. The Record button is used to record the current video stream. The location where the recording is saved can be sp...

AXIS M3007–P Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available...

AXIS M3007–P Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: • W...

AXIS M3007–P Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operat...

AXIS M3007–P Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 16 . • Stream profiles. See page 20 . • Camera settings. See page 20 . • View areas. See page 22 • Overlay image. See page 22 . • Privacy mask. See page 24 . Set Up Video ...

AXIS M3007–P Video Overview This is an overview of the entire area under surveillence. Define the settings for this view from Setup > Video > Video Stream . See Set Up Video Streams on page 16 . Panorama This offers a 180 degree view. Define the settings for this view from Setup > Video >...

AXIS M3007–P Video Quad View A quad view is four views on a single screen where each image takes up a quarter of the display area. To define the settings for thisview go to Setup > Video > Video Stream > Quad View . See Set Up Video Streams on page 16 . Image The default image settings can ...

AXIS M3007–P Video The following settings are available: • Resolution . Select the default resolution. • Compression . The compression level affects the image quality, bandwidth and file size of saved images; the lower the compression, the higher the image quality with higher bandwidth requirements ...

AXIS M3007–P Video • Baseline . The Baseline profile is recommended for clients that don’t support CABAC entropy coding. • Main . The Main profile provides higher compression with maintained video quality compared to the Baseline profile but requires more processing power to decode. The bit rate can...

AXIS M3007–P Video Increasing the Sharpness can increase bandwidth usage. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the whole image will appear less sharp. The Contrast changes the relative difference between light and dar...

AXIS M3007–P Video Set Gain to • Auto to set the gain automatically. If required, use Max gain to limit the applied gain. • Fixed to use a fixed gain. When Shutter and Gain are both set to Auto , it is possible to set the Priority between low motion blur and low noise manually and to use a different...

AXIS M3007–P Video Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provideextra information or to mask a part of the image. Since it is static, the position and size of an overlay image will remain the same regard...

AXIS M3007–P Video 1. Go to Video > Video Stream and select the Image tab. 2. Under Overlay Settings , select Include text . 3. Enter the modifier #D and, optionally, additional text which will be displayed also when the action rule is not active. Create the action rule: 1. Go to Events > Acti...

AXIS M3007–P Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 20 . • Default Viewer for Browser. See page 25 . • View...

AXIS M3007–P Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC) on page 12 . User Defi...

AXIS M3007–P PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) PTZ controls are only available for view areas. Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists ofthe following values: • Pan and tilt positions • Z...

AXIS M3007–P PTZ (Pan Tilt Zoom) To add a guard tour: 1. Go to PTZ > Guard Tour and click Add . 2. Enter a descriptive name. 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order...

AXIS M3007–P Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go to Detectors &...

AXIS M3007–P Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Wi...

AXIS M3007–P Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For informationabo...

AXIS M3007–P Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factorydefault, see Reset to Factory Default Settings . 33

AXIS M3007–P Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whenthe action is trigger...

AXIS M3007–P Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 32 . • Detectors - Day/Night Mode – Trigger the rule when the product switches bet...

AXIS M3007–P Events - Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 38 . This can for example be used to upload an image every 5 minutes. - Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 37 . Actions Available actions inc...

AXIS M3007–P Events HTTP Send Images Send Notification Send Video Clip HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and validatethe server’s certificate. If there is a proxy...

AXIS M3007–P Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: ...

AXIS M3007–P Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 39 . • To set up action rules, see page 34 . • To access recordings, see Recording List on page 39 . • To configure camera co...

AXIS M3007–P Recordings 5. Click Save to save and start the recording. 40

AXIS M3007–P Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file and click th...

AXIS M3007–P System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer log...

AXIS M3007–P System Options 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired protocol, in the address field in a browser...

AXIS M3007–P System Options To install a self-signed certificate: 1. Go to Setup > System Options > Security > Certificates . 2. Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate: 1. Create a self-signed certificate as ...

AXIS M3007–P System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings areconfigured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Configuration Proto...

AXIS M3007–P System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the Installation and Management Softw...

AXIS M3007–P System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings pr...

AXIS M3007–P System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router isfound, the ...

AXIS M3007–P System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should b...

AXIS M3007–P System Options Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card withspeed class 10. The following SD card file systems are supported: • ext4 — recommended due to its resilience against data loss if the card is ejected ...

AXIS M3007–P System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated forrecordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www.axis.com/produ...

AXIS M3007–P System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 54 . System Overview To get an overview of the Ax...

AXIS M3007–P System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, goto System Options > Advanced > File Upload . Uploaded files are accessed through http://<ip address>/local/<user>/<...

AXIS M3007–P Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correction that fixes y...

AXIS M3007–P Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting the IP address ...

AXIS M3007–P Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System Log under System Options ...

AXIS M3007–P Technical Specifications Function/group Item Specifications ApplicationProgrammingInterface Open API for software integration, VAPIX® and AXIS Camera Application Platform fromAxis Communications, specifications available at www.axis.com Support for AXIS Video Hosting System (AVHS) with ...

AXIS M3007–P Technical Specifications Function/group Item Specifications Canada: ICES-003 Canadian ICES-003, Class B digital, demonstrated by compliancewith EN 55022 (CISPR 22)Korea: KCC Class B Dimensions(Diameter xHeight) 131 x 53 mm (5.2 x 2.1 in) Weight 570 g (1.26 lb.) Includedaccessories Insta...