Page 3 - WARNING; Support
Safety This product complies with IEC/EN/UL 60950-1 andIEC/EN/UL 60950-22, Safety of Information TechnologyEquipment. The product shall be grounded either through a shieldednetwork cable (STP) or other appropriate method. Battery Low battery power affects the operation of the RTC, causing it to rese...
Page 4 - AXIS Q6115-E PTZ Dome Network Camera; Table of Contents
AXIS Q6115-E PTZ Dome Network Camera Table of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 LED Indicators . . . . . . . . ....
Page 6 - Hardware Overview
AXIS Q6115-E PTZ Dome Network Camera Hardware Overview Hardware Overview NO NO NOTICE TICE TICE Make sure the dome is attached in operation mode, otherwise focus may be affected. 1 3 4 9 5 6 8 7 2 1. Hook for safety wire 2. Network connector (High PoE) 3. Ground screw 4. Unit holder (3x) 5. Part num...
Page 7 - Connectors and Buttons; Network Connector; SD Card Slot; Unmount; Control Button; Power Button; LED Indicators; Status LED
AXIS Q6115-E PTZ Dome Network Camera Hardware Overview Connectors and Buttons For technical specifications, see page 59 . Network Connector RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE). NO NO NOTICE TICE TICE The product shall be connected using a shielded network cable (...
Page 8 - Midspan LED Indicators; LED
AXIS Q6115-E PTZ Dome Network Camera Hardware Overview Midspan LED Indicators LED Color Indication Off Power off Orange Power on Green A remote terminal is connected Orange, flashing Non-standard powered device is connected to the port terminal Port Green, flashing Port was powered at four pairs. Th...
Page 9 - Access the Product; Access from a Browser; Access from the Internet
AXIS Q6115-E PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ®...
Page 10 - Set the Root Password; The Live View Page; Controls on the Live View Page
AXIS Q6115-E PTZ Dome Network Camera Access the Product Set the Root Password To access the Axis product, you must set the password for the default administrator user root . This is done in the Configure Root Password dialog, which opens when the product is accessed for the first time. To prevent ne...
Page 11 - Manual Trigger; AXIS Media Control viewer toolbar
AXIS Q6115-E PTZ Dome Network Camera Access the Product Manual Trigger The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration. To configure the manual trigger: 1. Go to...
Page 13 - Media Streams; MJPEG
AXIS Q6115-E PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and ...
Page 14 - Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS Q6115-E PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC...
Page 16 - Set Up the Product; Setup; Basic Setup
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access t...
Page 17 - Video; Pixel Counter; Image
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product Video It is possible to configure the following video features in your Axis product: • Video stream. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 19 . • Overlay image. See page 20 . • Privacy mask. See page 22 . Se...
Page 18 - Stream Profiles
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product H.264 H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a ...
Page 19 - Camera Settings; Capture Mode
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product To create a new profile or modify an existing profile, go to Setup > Video > Stream Profiles . To select a default stream profile for the Live View page, go to Setup > Live View Config . Camera Settings The Video > Camera Settings p...
Page 20 - Exposure Settings; Overlay
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product Exposure Settings Exposure control - These settings is used to adapt to the amount of light used. Automatic is the default setting and it can be used in most situations. The shutter speed is automatically set to produce optimum image quality. U...
Page 21 - Overlay Image
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product Note To enable overlays: 1. Go to Video > Video Stream and select the Image tab. 2. To include an overlay image, select Include overlay image at the coordinates . The overlay image must first be uploaded to the Axis product, see Overlay Imag...
Page 22 - Privacy Mask
AXIS Q6115-E PTZ Dome Network Camera Set Up the Product 2. Select the image to use from the Use overlay image list and click Save . To display the overlay image: 1. Go to Video > Video Stream and select the Image tab. 2. Under Overlay Settings , select Include overlay image at the coordinates . 3...
Page 23 - Configure the Live View Page; Default Viewer for Browsers
AXIS Q6115-E PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Brows...
Page 24 - User Defined Links; Show custom link
AXIS Q6115-E PTZ Dome Network Camera Configure the Live View Page User Defined Links To display user-defined links in the Live View page, select the Show custom link option, give the link a name and then enter the URL to link to. When defining a web link do not remove the 'http://' from the URL addr...
Page 25 - Preset Positions; Configuration
AXIS Q6115-E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists ofthe following values: • Pan and tilt positions • Zoom position • Focus pos...
Page 26 - Gatekeeper
AXIS Q6115-E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) 3. Click Save . 90° - 90° - 180°/180° 0° 90° - 90° - 180°/180° 0° A B B A 1 2 Top view A Pan limit start B Pan limit end Gatekeeper The Active Gatekeeper monitors an area such as an entrance gate. When motion is detected in the monitored area,...
Page 27 - Tour Recording; OSDI Zones
AXIS Q6115-E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) 8. Specify the View Order or select the Random view order option. 9. Click Save . To modify or remove guard tours, go to PTZ > Guard Tour , select the guard tour in the Guard Tour List and click Modify/Remove . Note For products that suppor...
Page 28 - Advanced; Limits
AXIS Q6115-E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Advanced Limits Define the pan, tilt, zoom and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted tonarrow the area under surveillance. Near focus limit is used to prevent the camera from autofoc...
Page 29 - Control Queue
AXIS Q6115-E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) • Focus control • Iris control To disable specific controls, deselect the options under Enable/Disable controls . Control Queue Note • The administrator can enable and disable PTZ controls for selected users. • To identify different users in t...
Page 30 - Detectors; Shock Detection; Set Up Motion Detection Windows; Motion Detection Parameters
AXIS Q6115-E PTZ Dome Network Camera Detectors Detectors Shock Detection Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object or if the product is tampered with. Use the Shock sensitivity slider to adjust the se...
Page 32 - Applications; Application Licenses
AXIS Q6115-E PTZ Dome Network Camera Applications Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applicationsfor Axis products. For information about available applications, downloads, trials and licenses, go to www....
Page 34 - Events; Set Up Action Rules; Triggers
AXIS Q6115-E PTZ Dome Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and w...
Page 36 - Actions; Add Recipients; Recipient Types
AXIS Q6115-E PTZ Dome Network Camera Events Actions Available actions include: • Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off). • Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 22 . • PTZ Control - Autotracking – Sta...
Page 37 - Set Up Email Recipients; Create Schedules
AXIS Q6115-E PTZ Dome Network Camera Events HTTP Send Images Send Notification Send Video Clip HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and validatethe server’s certific...
Page 38 - Set Up Recurrences
AXIS Q6115-E PTZ Dome Network Camera Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. ...
Page 39 - Recordings; Find Recordings
AXIS Q6115-E PTZ Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 34 . • To access recordings, see Find Recordings on page 39 ....
Page 40 - Export Video Clip; Continuous Recording
AXIS Q6115-E PTZ Dome Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the filters. See also Find Recordings on page 39 . 3....
Page 41 - Languages; Upload Language; Restore
AXIS Q6115-E PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and loca...
Page 42 - System Options; Security; Users
AXIS Q6115-E PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to al...
Page 43 - Certificates
AXIS Q6115-E PTZ Dome Network Camera System Options To enable HTTPS on the Axis product: 1. Go to System Options > Security > HTTPS 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set t...
Page 45 - Network; Basic TCP/IP Settings; IPv4 Address Configuration; Enable ARP/Ping setting of IP address
AXIS Q6115-E PTZ Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled. IPv4 Address Configuration By default, the Axis product is set to us...
Page 46 - AXIS Internet Dynamic DNS Service; Advanced TCP/IP Settings; DNS Configuration
AXIS Q6115-E PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restar...
Page 47 - NTP Configuration
AXIS Q6115-E PTZ Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name...
Page 48 - Use manually selected NAT router -; SOCKS
AXIS Q6115-E PTZ Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router. The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband router, ...
Page 49 - UPnP; Bonjour
AXIS Q6115-E PTZ Dome Network Camera System Options AXIS Video MIB (Management Information Base) for video hardware can be used to monitor Axis-specific, hardware-relatedissues that may need administrative attention. For more information about AXIS Video MIB and to download MIB files, go to www.axis...
Page 50 - SD Card; Mount and Unmount SD Card
AXIS Q6115-E PTZ Dome Network Camera System Options Bonjour can be disabled under System Options > Network > Bonjour . Storage SD Card NO NO NOTICE TICE TICE To prevent data corruption, the SD card should be unmounted before removal. Note For SD card recommendations see www.axis.com The Axis p...
Page 51 - Network Share; Maintenance
AXIS Q6115-E PTZ Dome Network Camera System Options Important If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is insertedinto the Axis product. To enable automatic formatting, follow these steps: 1. Open the Axis product’s webpages and...
Page 52 - Support Overview; System Overview
AXIS Q6115-E PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factor...
Page 53 - Scripting; File Upload
AXIS Q6115-E PTZ Dome Network Camera System Options Parameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients that are currently accessing media streams. Crash Report - G...
Page 55 - Troubleshooting; Check the Firmware; Upgrade Server; Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address
AXIS Q6115-E PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a...
Page 56 - The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS Q6115-E PTZ Dome Network Camera Troubleshooting The IP address is being usedby another device Disconnect the Axis product from the network. Run the Ping command (in a Command/DOSwindow, type ping and the IP address of the product): • If you receive: Reply from <IP address>: bytes=32; time...
Page 59 - Technical Specifications
AXIS Q6115-E PTZ Dome Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Models AXIS Q6115-E: HDTV, 1080p, PTZ, Outdoor, Indoor Image sensor 1/3” Progressive scan CMOS Lens 4.4-132 mm, F1.4 - 4.6, autofocus, autoiris,Horizontal angle of view: 63.4˚ - ...
Page 61 - Performance Considerations
AXIS Q6115-E PTZ Dome Network Camera Technical Specifications Function/group Item Specifications KCC KN22 Class A, KN24IEC/EN/UL 60950-22IEC/EN 60529IEC/EN 62262 IK08IP66 NEMA 250 Type 4XIEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC60068-2-78ISO4892-2Midspan: EN 60...
