Axis AXIS P5522E - Manuals

AXIS P5522–E PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 6 5 1. Network connector 2. Part number (P/N) & Serial number (S/N). Serial number may be required during installation. 3. Control button 4. SDHC card slot 5. Status indicator LED 6. Restart button 7

AXIS P5522–E PTZ Dome Network Camera Hardware Overview Dome Cover 2 3 4 5 1 1 Screws 2 Dome ring 3 Dome cover 4 Top cover 5 Sealing ring Connectors and Buttons For technical specifications, see page 57 . Network Connector RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE). NO N...

AXIS P5522–E PTZ Dome Network Camera Hardware Overview SD Card Slot NO NO NOTICE TICE TICE • Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card. • Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. T...

AXIS P5522–E PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ®...

AXIS P5522–E PTZ Dome Network Camera Access the Product Set the Root Password To access the Axis product, you must set the password for the default administrator user root . This is done in the Configure Root Password dialog, which opens when the product is accessed for the first time. To prevent ne...

AXIS P5522–E PTZ Dome Network Camera Access the Product The product’s fan is controlled by the ambient temperature and is turned on and off automatically. If required, thefan can be activated manually by clicking the Fan button. To show the button, go to Setup > Live View Config . Under Action Bu...

AXIS P5522–E PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and ...

AXIS P5522–E PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC...

AXIS P5522–E PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access t...

AXIS P5522–E PTZ Dome Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 18 . • Stream profiles. See page 19 . • Camera settings. See page 19 . • Overlay image. See page 21 . • Privacy mask. See page 23 . Set Up Video St...

AXIS P5522–E PTZ Dome Network Camera Video The Axis product supports the following H.264 profile(s) : • Baseline . The Baseline profile is recommended for clients that don’t support CABAC entropy coding. The bit rate can be set as Variable bit rate (VBR) or Constant bit rate (CBR). VBR adjusts the b...

AXIS P5522–E PTZ Dome Network Camera Video IR cut filter The IR cut filter prevents infrared (IR) light from reaching the image sensor. In poor lighting conditions, for example at night, orwhen using an IR lamp, set the IR cut filter to Off . This increases light sensitivity and allows the product t...

AXIS P5522–E PTZ Dome Network Camera Video Image Settings Important The autofocus behavior is affected by factors such as light conditions, contrasts in the scene, and objects moving in and out. Inthese conditions or scenes, a manual focus could be preferable to enhance performance and allow the cam...

AXIS P5522–E PTZ Dome Network Camera Video 5. Enter the text to display in the Text field. This is the text that #D will be replaced by. 6. Specify the Duration . The text can be displayed while the rule is active or for a fixed number of seconds. ExampleTo display the text “Motion detected” when mo...

AXIS P5522–E PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 19 . • Default Viewer for Brows...

AXIS P5522–E PTZ Dome Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC...

AXIS P5522–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists ofthe following values: • Pan and tilt positions • Zoom position • Focus pos...

AXIS P5522–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active. Go to Events and set up an action rule with PTZ Preset Reached as trigger. Guard Tour A guard tour displays the video stream fro...

AXIS P5522–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt ...

AXIS P5522–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move topreset positions that require a tilt movement. Control Queue Note • The administrator can enable and disab...

AXIS P5522–E PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view. Motion detection is configured by defining up to 10 Include and Exclude windows: • Include windows — define areas where motion...

AXIS P5522–E PTZ Dome Network Camera Detectors Medium level (50%) A large difference in luminanceis required to trigger motiondetection. Low level (0%) Even very small objects triggermotion detection. An object that appears inthe window triggers motiondetection only for a very shorttime before it is...

AXIS P5522–E PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and coun...

AXIS P5522–E PTZ Dome Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and w...

AXIS P5522–E PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 32 . • Detectors - Live Stream Accessed – Trigger the rule...

AXIS P5522–E PTZ Dome Network Camera Events • Record Video – Record video to a selected storage. • Send Images – Send images to a recipient. • Send Notifications – Send a notification message to a recipient. • Send Video Clip – Send a video clip to a recipient. • Status LED – Flash the LED indicator...

AXIS P5522–E PTZ Dome Network Camera Events Network Share Send Images Send Video Clip A network share can also be used as a storage device forrecorded video. Go System Options > Storage to configure a network share before setting up a continuous recording oran action rule to record video. For mor...

AXIS P5522–E PTZ Dome Network Camera Recordings Recordings • To access recordings, see Recording List on page 39 . • To configure camera controlled storage, see Storage on page 48 . Recording List Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date...

AXIS P5522–E PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and loca...

AXIS P5522–E PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to al...

AXIS P5522–E PTZ Dome Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the ...

AXIS P5522–E PTZ Dome Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: 1....

AXIS P5522–E PTZ Dome Network Camera System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings areconfigured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic ...

AXIS P5522–E PTZ Dome Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the Installat...

AXIS P5522–E PTZ Dome Network Camera System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain NTP server address via DHCP to...

AXIS P5522–E PTZ Dome Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than ...

AXIS P5522–E PTZ Dome Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where t...

AXIS P5522–E PTZ Dome Network Camera System Options The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC cardwith speed class 10. The following SD card file systems are supported: • ext4 — recommended due to its resilience against data l...

AXIS P5522–E PTZ Dome Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated forrecordings and data from the Axis products connected to the network. For information about reference NAS devices, ...

AXIS P5522–E PTZ Dome Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 53 . System Overview To g...

AXIS P5522–E PTZ Dome Network Camera System Options Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the selected user group (viewer, operator or administrator) for the uploaded file. Plain Config Plain Config is for advanced us...

AXIS P5522–E PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a...

AXIS P5522–E PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems...

AXIS P5522–E PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System L...

AXIS P5522–E PTZ Dome Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Models AXIS P5522–E 50 HzAXIS P5522–E 60 Hz Image sensor 1/4” ExView HAD progressive scan CCD Lens Varifocal f=4.1 - 73.8 mm, F1.4 - 3.0Autofocus, automatic day/nightHorizontal a...

AXIS P5522–E PTZ Dome Network Camera Technical Specifications Function/group Item Specifications Videomanagementsoftware (notincluded) AXIS Camera Station — Video management software for viewing and recording up to 50camerasSee www.axis.com/products/video/software/ for more software applications via...