Autostart AS-6070 TW - Manuals

Page 2 - User Guide; Table of Contents

AS-6070 TW User Guide P. 2 Table of Contents Table of Contents ................................... 2 Transmitter Part Number and Serial Number of the Remote Car Starter Module .................................................... 3 Introduction ............................................. 3 Using th...

Page 3 - Companion Transmitter Part Number: ASTR-2144; Serial Number of the Remote Car Starter:; Introduction; section, later in this

AS-6070 TW User Guide P. 3 Transmitter Part Number and Serial Number of the Remote Car Starter Module The boxes below contain information concerning your transmitter and Remote Car Starter. We entered the part number of your transmitter for you. Should you need to order a new transmitter, you will n...

Page 4 - The functions of the transmitter are as follows:; LCD Remote Functions; LCD Remote Operation; Basic Vehicle Operation; Alarm Clock

The functions of the transmitter are as follows: LCD Remote Functions The Transmitter offers several command-confirmation and timer features. Thissection explains some of the key functions available on the Remote Control. Nextsection gives a summary of the button combinations used to access the func...

Page 6 - button is pressed on the remote control.; LCD Transmitter Operation (First Car Control)

will start flashing on the display. This will go on until either the Lock ( ) or the Unlock ( ) button is pressed on the remote control. LCD Transmitter Operation (First Car Control) Basic Vehicle Operation FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DESCRIPTION LOCK 1 Beep Locks the doors and...

Page 7 - Countdown Timer

Cold Weather Mode FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DESCRIPTION TO ENTER COLD WEATHER MODE Melody Press and hold for 3 seconds. TO EXIT COLD WEATHER MODE None Melody Press and hold for 3 seconds TO ENTER COLD WEATHER MODE IN SAFE START MODE X 2 Melody Press twice within 3 seconds. Or...

Page 8 - Safe Start Mode; LCD Transmitter Operation (Second Car Control); Remote-Starting Your Vehicle; Setting Your Vehicle Into Ready Mode; manual; transmission only. In order to start the vehicle

Safe Start Mode FUNCTION BY PRESSING ICON BUZZER INSTRUCTIONS / DESCRIPTION START ON SAFE START MODE X 2 + Melody Press the button twice within 3 seconds. Or: Press for 1 second (melody) thenpress again for 1 second. STOP ON SAFE START MODE None Melody *Runtime Options (once the car has been remote ...

Page 9 - Remaining In Ready Mode; Heater & Heated Seat

AS-6070 TW User Guide P. 9 To set the system to Ready Mode: 1. Ensure that all the doors are closed and that the shifter is in the neutral position. 2. With the engine already running, apply the parking brake and release the brake pedal. Make sure to release the brake pedal. 3. Within 20 sec. press ...

Page 10 - Driving Off; Using the System; Arming and Disarming the System

of vehicles could cause them to remain ON even after remote starter shut down, resulting in a dead battery. Driving Off With the vehicle running under remote control, press the UNLOCK button to disarm and unlock the doors. Enter the vehicle and do the following: x Turn the ignition key to the IGNITI...

Page 12 - “Home Valet; ” Mode

P. 12 User Guide AS-6070 TW x Come ON , go OUT ; then x Flash twice . “Home Valet TM ” Mode If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: ifthe vehicle is parked indoors there is no danger of it starting accidentally by remote control. Note: Onc...

Page 13 - Note; Quick Lockout; Cold Weather Mode; Advanced Features: Installation-programmable Options; Caution; Remote Door Locks

Note : To stop Panic Mode before the end of its delay, press the LOCK or UNLOCK button until the sound signal stops. Quick Lockout TM (Also called Secure Panic .) For fast protection in emergency situations, the system will LOCK all doors when you press the brake pedal while you hear the sound signa...

Page 15 - Swap Start Mode; Home Valet

AS-6070 TW User Guide P. 15 Car Finder (Enabled by default.) When enabled, the Car Finder option will help you locate your vehicle by generating a pulsating signal through the horn or the siren. To hear the signal, press the LOCK and UNLOCK buttons simultaneously. This will cause a pulsating signal ...

Page 16 - Troubleshooting Poor Transmitting Range; The condition of the battery in the transmitter.

P. 16 User Guide AS-6070 TW Multi-car Operation This option allows the owner of two vehicles, both equipped with System systems, to control both systems with a single remote control. To control the second vehicle, simultaneously press the TRUNK button and the button of the function you wish to use. ...