Autostart CT-5060 - Manual
Autostart CT-5060 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Remote-starting Your Vehicle; The Parking Lights will flash 3 times quickly and remain lit.; Remaining in Ready Mode
- Page 3 – Heater & Heated Seat; Driving Off; Idle Mode
- Page 4 – User Guide; Valet Mode; To EXIT Valet Mode; Remote Valet; The Parking Lights will flash 2 times.; Panic Mode; Safety feature: Activate Panic Mode in an emergency situation.
- Page 5 – (See below for a description of the Starter; To activate Panic Mode; Or press and hold the; Note; or; Quick Lockout; Cold Weather Mode; To enter Cold Weather Mode if Safe Start has been activated:
- Page 6 – Priority Door Access; permanently disabled.; User-selectable Options; the settings may affect the operation of your system.; To
- Page 7 – No Chirp (the vehicle will not chirp under any circumstance).
- Page 9 – Car Finder; Diagnostics – Chirps Diagnostics – Parking Lights
DOC.3.55
CA
– September 9, 2004
Manufactured in Canada by Autostart
M A N U A L
T R A N S M I S S I O N M U L T I - C H A N N E L R E M O T E
S T A R T E R A N D F U L L - F E A T U R E D A L A R M S Y S T E M
CT-5060
User Guide
Introduction ......................................... 1
Basic Remote Operation..................... 1
Remote-starting Your Vehicle ............. 2
Remote-starting ............................ 2
Setting the system to Ready Mode..... 2
Remaining in Ready Mode ........... 2
Vehicle Presets............................. 3
Driving Off..................................... 3
Idle Mode ............................................ 3
Valet Mode.......................................... 4
Ignition Valet ....................................... 4
Remote Valet ...................................... 4
Panic Mode......................................... 4
.................................. 5
Cold Weather Mode............................ 5
Priority Door Access ........................... 6
Chirp Delete........................................ 6
User-selectable Options ..................... 6
Safe Start...................................... 6
Remote Door Locks ...................... 6
Passive or Active Arming .............. 7
Disarmed Notification.................... 7
Sense............................................ 7
Siren Chirps .................................. 7
Open Zone Notification: ................ 7
Ignition-Controlled Door Locks ..... 7
Ignition Re-Lock ............................ 8
Secure Lock .................................. 8
Remote Trunk Release ................. 8
Starter Kill ..................................... 8
Engine Run Time .......................... 8
Multi-Car Operation ...................... 8
Car Finder ........................................... 9
Diagnostics – Chirps Diagnostics –
Parking Lights ..................................... 9
Parking Lights Flash Rate (Normal
Operation)........................................... 9
Introduction
This Module is a state-of-the-art combination of an Alarm system and a remote car
starter. It represents a major breakthrough in vehicle security technology and remote
starter systems.
Basic Remote Operation
This system is equipped with a 4-button multi-channel two-way transmitter. It can operate
two independent identically-equipped vehicles (see Multi-Car Operation for second-car
transmitter functions).
The functions of the transmitter are as follows:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Note: Pressing the LOCK and UNLOCK buttons at the same time will activate the AUX 2 output. Remote-starting Your Vehicle Remote-starting Press the START/STOP button for approx. 1 second. The parking lights will come ON , informing you that the unit has received your signal. The engine will start app...
P. 3 User Guide CT-5060 • Door opened; • Hood opened; • Brakes pressed; • Parking Brake disengaged; • Key turned to the IGNITION ON (RUN) position. Should any of the above occur, Ready Mode will be cancelled. Note: The unit will notify the user that it has exited Ready Mode by giving three slow flas...
CT-5060 User Guide P. 4 Valet Mode The system can be placed in Valet Mode to disable the remote starting capabilities. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote-started accidentally. To put the system into Valet Mode: 1. ...
