Autostart AS-6850VTW-FM - Manuals

P. 6 User Guide 15 Alarm Clock Menu ALARM Alarm hours A 12:00 12 is flashing Adjusts alarm hour (value from 0 to 12). Alarm minutes A 12:00 00 is flashing Adjusts alarm minute (value from 0 to 59). Toggle alarm A – ON + Or A – OFF Enables or disables alarm. Parking Countdown This version of the coun...

User Guide P. 7 Button Operation: Button LCD Sound Lock button + LOCK 1 beep Unlock button + UNLOCK 2 beeps Trunk button TRUNK text for 1 sec. 1 beep Start button START text for 1 sec., + backlight user selected for 2 sec. 1 beep Engine running run time + icon + blue backlight for 3 sec. 3 beeps Eng...

P. 8 User Guide Setting Your Vehicle Into Ready Mode If your vehicle has a manual transmission you must read the following indications. In order to start the vehicle by remote, the unit must first be set to Ready Mode. If the unit is not set to Ready Mode, it cannot remote start the vehicle. Please ...

User Guide P. 9 Arming the Starter Kill The Starter Kill (if installed) can be configured by the installer so as to arm automatically (passive mode) or not to arm automatically (active mode). • To disarm the Starter Kill, press the button on the transmitter. The parking lights will flash twice. If r...

P. 10 User Guide To leave the vehicle in Idle Mode if your vehicle has an automatic transmission: 1. With the engine running, make sure to release the brake pedal and press the or button (to unlock the doors) or the button on the remote control until the parking lights come on or you hear a series o...

User Guide P. 11 2- Getting into Combo Valet Mode using combined buttons on the transmitter: • Hold the and buttons simultaneously for 3 seconds. • The parking lights will flash 3 times and the LED on the antenna will remain ON solid. • The icon will appear on your LCD remote. 2- Getting out of Vale...

P. 12 User Guide • The parking lights will flash 2 times and the LED on the antenna will turn OFF . • The icon will disappear on your LCD remote. Valet Alarm Mode This feature will allow you to put your system into Valet Alarm Mode by using the transmitter. Getting into Valet Alarm Mode • Press the ...

User Guide P. 13 To exit Cold Weather Mode, do any one of the following actions: • Open the hood. • Start the engine by remote. • Turn the key to the IGNITION ON (RUN) position. • Press and release the button and you will hear a beep; L-01 will appear on the display. Press the button for 3 seconds (...

P. 14 User Guide Ignition-Controlled Door Locks This is an added security feature. If your remote starter was installed with the ignition-controlled door locks option, the doors will automatically lock as soon as the key is turned to the IGNITION ON (RUN) position while the brakes are pressed. The r...

User Guide P. 15 How to Access Safe Start Mode Function By pressing Icon Sound Instructions / description Start on Safe Start Mode x 2 Melody Press twice within 3 seconds. Press for 1 sec-melody-then press 1 sec. Stop on Safe Start Mode None Melody Installer-programmable Valet Modes Valet Mode Using...

P. 16 User Guide How to Access Home Valet Mode Function By pressing Icon Sound Instructions / description To enter Home Valet Mode Step 1 : or Step 2 : + simultaneously within 5 sec. 1 beep Press or . Within 5 seconds, press + . . The transmitter will display and there will be 1 beep. To exit Home V...

User Guide P. 17 How to Access Run Time Status (Indications purposes only) Function By pressing Icon Gasoline Diesel 3 minutes 8 minutes Engine runtime 15 minutes 20 minutes 25 minutes 30 minutes Temperature Request (If ACC-Temp-101 installed) The user can request the temperature in the vehicle if a...

P. 18 User Guide LCD Transmitter Operation and Confirmation (Second Car Control) Basic Operations Function Button press Icon Sound Lock + 1 beep Unlock + 2 beeps Start + Run time + 3 beeps Stop + none 2 beeps Trunk ¾ ¾ flashing 1 sec. 1 beep Start/Stop While in Safe Start Mode Function Button press ...

P. 20 User Guide Troubleshooting Transmitting Range Many factors may affect the operating range of the transmitter. Some of these are: • The condition of the battery in the transmitter. • The operating environment (for example: downtown radio-frequency noise, airports, cellular phone towers…) • Meta...

User Guide P. 21 Diagnostics – Parking Light Flash Table Flashes Description 1 • Doors locked, alarm and starter kill armed • Run time has expired • TRUNK button pressed • Start signal received by the module • Cold weather mode cancelled 2 • Remote start attempt cancelled by remote • Doors unlocked,...