Audiovox Pro9544FT3 - Manuals

Audiovox Pro9544FT3 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - INSTALLATION OF MAJOR COMPONENTS

Page 2 Fifth Press and release the valet switch 2 chirps = active locks Press transmitter Lock button to change 1 chirp = passive locks or Sixth Press and release the valet switch 2 chirps = active arming Press transmitter Lock button to change 1 chirp = passive arming or Seventh Press and release t...

Page 3 - WIRING THE SYSTEM; Large 8 Pin Edge Connector:

Page 3 the dash, located where it can be easily seen from outside the vehicle, yet not be distracting to the driver.Once a location has been selected, check behind the panel for wire routing access, and to confirm the drillwill not damage any existing components as it passes through the panel.Drill ...

Page 4 - some remote start trigger inputs, will damage the control module.; Wiring The 11 Pin Mini Edge Connector:; trunk release circuits will damage the control module.; be active as long as the transmitter button is depressed.

Dark Blue Wire: DELAYED 300 mA PULSED OUTPUT / CHANNEL 3The dark blue wire pulses to ground via an independent RF channel from the keychain transmitter. This isa transistorized, low current output, and should only be used to drive an external relay coil.WARNING: Connecting the dark blue wire to the ...

Audiovox Manuals