Audiovox PRO-9342FT3 - Manuals

Page 2 Sixth Press and release the valet switch 2 chirps = hardwire Press transmitter Lock button to change 1 chirp = voltage sense or Seventh Press and release the valet switch 1 chirp = siren and horn output Press transmitter Lock button to change 2 chirps = siren output only Press transmitter loc...

Page 3 Dash Mounted LED:A small red LED is included that will serve as a visual indicator of the alarm status. It should be installed inthe dash, located where it can be easily seen from outside the vehicle, yet not be distracting to the driver.Once a location has been selected, check behind the pan...

Page 7 output. Connect this wire to the drivers door unlock relay that requires a low current positive signal tounlock only the drivers door. If the vehicle does not have a separate drivers door relay, one will have to beadded. Locate the drivers door unlock motor wire and cut it at a convenient loc...