Audiovox DVD Home Theater System - Manuals

E - 5 Before You Start To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you willneed to replace the batteries. Notes: • If the Remote Control is not going to be used for a long time, rem...

E - 6 Rear Panel 1) Disc trayOpen or close tray by pushing OPEN/CLOSE button.Place a disc on the disc tray, label side up. 2) standby indicator When the Unit is turned on by pressing the POWER/STANDBY button, the light will illuminate a fewseconds. If you press the POWER button on theremote control,...

E - 7 Parts and Functions 1) POWER / button Turns the Unit on and puts it in standby mode. 2) RETURN buttonReturn to the normal operation after using the SETUPmenu. 3) Number (0 - 9) and (+10) buttonsUse when creating programs, and entering a parentallevel password. To select numbers over 9, press +...

E - 9 Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit, "Invalid Region"appears on the TV screen. (The disc cannot be played). If no disc is loadedwhen the Main Unitis switched on. Tray open Tra...

E - 10 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) FMC o n n e c t F M a n t e n n a( i n c l u d e d ) t o t h e F MANTENNA jacks. AMConnect the loop antenna(included) to the AM LOOPANTENNA terminals. A.Connectin...

E - 11 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) B. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the lef...

E - 12 Notes:• If the external equipment is a television and this audio system is closed to it, you may experience interference if the tuner function is selected while the television is working. • When you have selected TUNER function, sound will ONLY come from the front left, right speakers and sub...

E - 13 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) D. Connecting the speakers & subwoofer 1. The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of ...

E - 14 Setup Turning on the Unit and TV 1)Press the POWER button to turn the Unit ON, or 2)Press the /POWER button on the remote control or the FUNCTION button or the PLAY button to turn on the Unit while the Unit is in standby mode. 3)Turn on the TV by pressing its POWER button.4)Select the channel...

E - 15 To adjust the surround sound balance while Pro Logic decoding is in effect Use the remote control to make the following changes to speaker balance:Front speaker (left)• Press the SOUND button repeatedly to display LEFT, then press the or CURSOR button to adjust the sound level. It will show o...

E - 16 Adjusting the Sound The following tables show which speakers are working in the various modes. REMARKS:1) Generally, only Front Left, Right speakers and Subwoofer are active at TUNER mode.2) " " The speakers is activated. 3) " X " The speakers is not activated. 4) Always keep ...

E - 17 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Playing a Disc DV D CD This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs areproduced in a manner that allows specific or limited oper...

E - 18 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Fast Forward/Fast Reverse 1. Press the TUNING or TUNING button when a disc is playing. • The disc begins fast scan at x2 speed. • Four speeds are available. Each time T...

E - 19 DVD Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the samescene can be viewed from each of these different angles.1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the...

E - 20 Subtitle selection 1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the example below. 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. Notes :• If only one language is recorded, the language does not cha...

E - 21 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Special Functions DVD DISPLAY function Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE.• While the disc i...

E - 22 Locating a specific title If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.1. In stop mode, press the GOTO button.2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. 3...

E - 23 DV D CD Locating a specific time You can move to a specific location by entering its corresponding time (hours, minutes, seconds)1. Press the GOTO button.2. Press or button to highlight time. 3. Press the corresponding number buttons for the setting point you want. • The first two numbers you...

E - 24 Programmable memory The two types of programmed playback provided by this Unit are title programmed playback and chapter programmedplayback. Title / Chapter programmed playback 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in - - . Use or button to move the ...

E - 25 You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a title You can play the same title repeatedly.1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Title ” indicator displays on the screen. The current title is...

E - 26 DVD Repeat Playback Advancedplayback Repeating a specific section You can play a specific section repeatedly.1. While the disc is playing, press the REPEAT A-B button at the beginning of the section ( ) is displayed you want to play repeatedly. 2. Press the REPEAT A-B button again at the end ...

E - 27 This Unit will play MP3 and Picture files recorded on CD-R and CD-RW discs . Playing a MP3 file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Inser t a MP3 file disc on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The Unit will...

E - 28 Playing MP3 and Picture File Disc Playing a Picture file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Inser t a Picture CD on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The unit will take a shor t while to load the disc. 5. ...

E - 29 Tuning into a station manually 1. Press the FUNCTION button until the frequency band appears on the display. 2. Press the BAND button on the remote remote or STOP button on the front panel to select the desired band. 3. Press the TUNING button to tune in the desired station. FM Stereo • Press...

E - 30 LANGUAGE setting 1. Press the FUNCTION button until DVD appears on the display. 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or button to English, then press the ENTER button. The s...

E - 31 VIDEO setting TV Shape 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button.3. Use or button to select TV Shape, then press the ENTER button.4. Use or button to shift and select the TV type, then press the ENTER button.5. To exit the FUNCTION SETUP MENU and...

E - 32 Video Output 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button.3. Use or button to select Video Output, then press the ENTER button.4. Use or button to shift and select the signal, then press the ENTER button.5. To exit the FUNCTION SETUP MENU and return...

E - 33 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Customizing the Function Settings Sharpen : Fine detail will be easier to see.Soften : Soft-focus effect.Off : Picture will be returned to normal. Edges 1. Press the SE...

E - 34 AUDIO setting Digital Out 1. Press the SETUP button.2. Use or button to select Audio, press the ENTER button.3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. To exit the FUNCTION SETUP MENU and return to the normal screen, press...

E - 35 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Subwoofer 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button.3. Use or button to Subwoofer, and then press the ENTER button. 4. Use...

E - 36 Customizing the Function Settings RATING setting Password/Rating DVD discs equipped with the password function are rated according to their content. The contents allowed by aparental lock level and the way a DVD disc can be controlled may vary from disc to disc.For example, if the disc allowe...

E - 37 Factory Set If you want to return the initial language setting to the factory default, do the following:1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button.3. Use or button to shift and select the Factory Set, then press the ENTER button.4. Use or but...

E - 38 Code AAABAFAMARASAYAZBABEBGBHBIBN BOBRCACOCSCYDADEDZELENEOESETEUFAFIFJFOFR Code FYGAGBGLGNGUHAHIHRHUHYIAIEIKINISITIWJAJIJWKAKKKLKMKNKOKSKUKYLALNLOLTLV Language Name FrisianIrishScots GaelicGalicianGuaraniGujaratiHausaHindiCroatianHungarianArmenianInterlinguaInterlingueInupiakIndonesianIceland...

E - 39 Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-and-water solutionand wrung out thoroughly, t...

E - 40 SYMPTOM CAUSE (AND REMEDY) • Check that the speakers and equipment are connected securely. • Make sure that you've selected the correct equipment on the system. • The system is in pause mode or in Slow-motion Play mode. Press the PLAY button to return to normal play mode. • Fast forward or fa...