Page 2 - WARNING: TO PREVENT FIRE OR SHOCK
E - 1 Important Safety Instructions WARNING The lightning flash with an arrowhead symbol, withinthe equilateral triangle, is intended to alert the user tothe presence of uninsulated "dangerous voltage"within the product's enclosure that may be of sufficientmagnitude to cause an electric shoc...
Page 4 - Table of Contents
E - 3 Table of Contents Repeat Playback ................................... 25-26 Repeating a title/chapter (DVD) ............................ 25 Repeating a single track/whole disc (CD) ........... 25 Repeating a specific section (DVD) ...................... 26 Playing MP3 and Picture File Disc.......
Page 5 - Title, Chapter and Tracks; Icons Used on DVDs; Disc Formats; Compatible
E - 4 The Unit can playback. Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the RegionManagement Information that is encoded on DVD discs. If the Region number printed on the DVD disc doesnot correspond to the Region number of this U...
Page 6 - Before You Start; To install Batteries; Using the Remote Control
E - 5 Before You Start To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you willneed to replace the batteries. Notes: • If the Remote Control is not going to be used for a long time, rem...
Page 7 - Parts and Functions
E - 6 Rear Panel 1) Disc trayOpen or close tray by pushing OPEN/CLOSE button.Place a disc on the disc tray, label side up. 2) standby indicator When the Unit is turned on by pressing the POWER/STANDBY button, the light will illuminate a fewseconds. If you press the POWER button on theremote control,...
Page 8 - TUNING; Remote Control
E - 7 Parts and Functions 1) POWER / button Turns the Unit on and puts it in standby mode. 2) RETURN buttonReturn to the normal operation after using the SETUPmenu. 3) Number (0 - 9) and (+10) buttonsUse when creating programs, and entering a parentallevel password. To select numbers over 9, press +...
Page 10 - Display; Front Panel Display; Display Examples; Close
E - 9 Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit, "Invalid Region"appears on the TV screen. (The disc cannot be played). If no disc is loadedwhen the Main Unitis switched on. Tray open Tra...
Page 11 - Setup; For better reception; DVD Unit; TV
E - 10 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) FMC o n n e c t F M a n t e n n a( i n c l u d e d ) t o t h e F MANTENNA jacks. AMConnect the loop antenna(included) to the AM LOOPANTENNA terminals. A.Connectin...
Page 12 - VCR
E - 11 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) B. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the lef...
Page 13 - Listening to another audio equipment; Digital connection
E - 12 Notes:• If the external equipment is a television and this audio system is closed to it, you may experience interference if the tuner function is selected while the television is working. • When you have selected TUNER function, sound will ONLY come from the front left, right speakers and sub...
Page 14 - E. Positioning the speakers and subwoofer; FRONT SPEAKERS; SUBWOOFER; REAR SPEAKERS
E - 13 Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) D. Connecting the speakers & subwoofer 1. The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of ...
Page 15 - Turning on the Unit and TV; )Press the POWER button to turn the Unit ON, or; Power cord connection; DO NOT RETURN THIS TO THE STORE
E - 14 Setup Turning on the Unit and TV 1)Press the POWER button to turn the Unit ON, or 2)Press the /POWER button on the remote control or the FUNCTION button or the PLAY button to turn on the Unit while the Unit is in standby mode. 3)Turn on the TV by pressing its POWER button.4)Select the channel...
Page 16 - To adjust the sound quality; CURSOR button to adjust the sound level.; Adjusting the Sound
E - 15 To adjust the surround sound balance while Pro Logic decoding is in effect Use the remote control to make the following changes to speaker balance:Front speaker (left)• Press the SOUND button repeatedly to display LEFT, then press the or CURSOR button to adjust the sound level. It will show o...
Page 17 - To select the listening channel; Audio Settings
E - 16 Adjusting the Sound The following tables show which speakers are working in the various modes. REMARKS:1) Generally, only Front Left, Right speakers and Subwoofer are active at TUNER mode.2) " " The speakers is activated. 3) " X " The speakers is not activated. 4) Always keep ...
Page 18 - DV D; Playing a Disc; Stopping playback; DV D; To skip to a different track
E - 17 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Playing a Disc DV D CD This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs areproduced in a manner that allows specific or limited oper...
Page 19 - Fast Forward/Fast Reverse; Zooming into an image
E - 18 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Fast Forward/Fast Reverse 1. Press the TUNING or TUNING button when a disc is playing. • The disc begins fast scan at x2 speed. • Four speeds are available. Each time T...
Page 20 - DVD; Angle selection; Audio selection
E - 19 DVD Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the samescene can be viewed from each of these different angles.1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the...
Page 21 - Subtitle selection
E - 20 Subtitle selection 1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the example below. 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. Notes :• If only one language is recorded, the language does not cha...
Page 22 - Special Functions; DISPLAY function; • Press the ANGLE button to select the desired angle.; GOTO function
E - 21 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Special Functions DVD DISPLAY function Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE.• While the disc i...
Page 23 - Locating a specific title; Locating a specific title / chapter / track
E - 22 Locating a specific title If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.1. In stop mode, press the GOTO button.2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. 3...
Page 24 - Locating a specific time
E - 23 DV D CD Locating a specific time You can move to a specific location by entering its corresponding time (hours, minutes, seconds)1. Press the GOTO button.2. Press or button to highlight time. 3. Press the corresponding number buttons for the setting point you want. • The first two numbers you...
Page 25 - Title / Chapter programmed playback; CD / DVD programmable memory; Programmable memory; Track programmed playback; CD
E - 24 Programmable memory The two types of programmed playback provided by this Unit are title programmed playback and chapter programmedplayback. Title / Chapter programmed playback 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in - - . Use or button to move the ...
Page 26 - Repeat Playback
E - 25 You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a title You can play the same title repeatedly.1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Title ” indicator displays on the screen. The current title is...
Page 27 - Repeating a specific section
E - 26 DVD Repeat Playback Advancedplayback Repeating a specific section You can play a specific section repeatedly.1. While the disc is playing, press the REPEAT A-B button at the beginning of the section ( ) is displayed you want to play repeatedly. 2. Press the REPEAT A-B button again at the end ...
Page 28 - Playing a MP3 file disc; To pause playback; Playing MP3 and Picture File Disc
E - 27 This Unit will play MP3 and Picture files recorded on CD-R and CD-RW discs . Playing a MP3 file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Inser t a MP3 file disc on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The Unit will...
Page 29 - Playing a Picture file disc
E - 28 Playing MP3 and Picture File Disc Playing a Picture file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Inser t a Picture CD on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The unit will take a shor t while to load the disc. 5. ...
Page 30 - Tuning into a station manually; STOP button; FM Stereo; Radio Operation; To search for a station automatically; Presetting stations; Tuning into a preset station; NEXT or PREV
E - 29 Tuning into a station manually 1. Press the FUNCTION button until the frequency band appears on the display. 2. Press the BAND button on the remote remote or STOP button on the front panel to select the desired band. 3. Press the TUNING button to tune in the desired station. FM Stereo • Press...
Page 31 - LANGUAGE setting; Press the FUNCTION button until DVD appears on the display.; Customizing the Function Settings
E - 30 LANGUAGE setting 1. Press the FUNCTION button until DVD appears on the display. 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or button to English, then press the ENTER button. The s...
Page 32 - VIDEO setting; TV Shape
E - 31 VIDEO setting TV Shape 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button.3. Use or button to select TV Shape, then press the ENTER button.4. Use or button to shift and select the TV type, then press the ENTER button.5. To exit the FUNCTION SETUP MENU and...
Page 33 - Video Output; Brightness
E - 32 Video Output 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button.3. Use or button to select Video Output, then press the ENTER button.4. Use or button to shift and select the signal, then press the ENTER button.5. To exit the FUNCTION SETUP MENU and return...
Page 34 - Edges
E - 33 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Customizing the Function Settings Sharpen : Fine detail will be easier to see.Soften : Soft-focus effect.Off : Picture will be returned to normal. Edges 1. Press the SE...
Page 35 - AUDIO setting; Digital Out
E - 34 AUDIO setting Digital Out 1. Press the SETUP button.2. Use or button to select Audio, press the ENTER button.3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. To exit the FUNCTION SETUP MENU and return to the normal screen, press...
Page 36 - Subwoofer; or button to Subwoofer, and then press the ENTER button.; Pink noise; or button to Pink noise, and then press the ENTER button.
E - 35 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Subwoofer 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button.3. Use or button to Subwoofer, and then press the ENTER button. 4. Use...
Page 37 - RATING setting
E - 36 Customizing the Function Settings RATING setting Password/Rating DVD discs equipped with the password function are rated according to their content. The contents allowed by aparental lock level and the way a DVD disc can be controlled may vary from disc to disc.For example, if the disc allowe...
Page 38 - Factory Set
E - 37 Factory Set If you want to return the initial language setting to the factory default, do the following:1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button.3. Use or button to shift and select the Factory Set, then press the ENTER button.4. Use or but...
Page 39 - Language Code List for Disc Language
E - 38 Code AAABAFAMARASAYAZBABEBGBHBIBN BOBRCACOCSCYDADEDZELENEOESETEUFAFIFJFOFR Code FYGAGBGLGNGUHAHIHRHUHYIAIEIKINISITIWJAJIJWKAKKKLKMKNKOKSKUKYLALNLOLTLV Language Name FrisianIrishScots GaelicGalicianGuaraniGujaratiHausaHindiCroatianHungarianArmenianInterlinguaInterlingueInupiakIndonesianIceland...
Page 40 - Cleaning Disc; Maintenance
E - 39 Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-and-water solutionand wrung out thoroughly, t...
Page 41 - SYMPTOM; Trouble Shooting Guide
E - 40 SYMPTOM CAUSE (AND REMEDY) • Check that the speakers and equipment are connected securely. • Make sure that you've selected the correct equipment on the system. • The system is in pause mode or in Slow-motion Play mode. Press the PLAY button to return to normal play mode. • Fast forward or fa...
