Audiovox AS - 9151N - Manuals

Audiovox AS - 9151N – Manual in PDF format online.

Manuals:

Manual Audiovox AS - 9151N

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - IGNITION SWITCH KEY POSITION

BATT 1 BATT 2 ACC IGN 1 IGN 2 IGN 3 START * SPLICE (TYP.) IGNITION SWITCH KEY POSITION OFF ACCESSORY ON / RUN START LT.BLUEWIREFROMAS-9151N VIOLETWIREFROMAS-9151N REDWIREFROMAS-9151N REDw/WHITETRACEWIREFROMAS-9151N SEE"WIRINGTHE12PINCONNECTOR"-LT.BLUEWIREIFREQUIRED. LT.GREENWIREFROMAS-9151N ...

Page 3 - WIRING CONNECTIONS: 12 Pin Input / Output Harness; Connect this wire to a solid, clean chassis ground source.; If the alarm system does not incorporate a hood pin switch,

WIRING CONNECTIONS: 12 Pin Input / Output Harness 1. BLACK Wire: Chassis Ground Source Connect this wire to a solid, clean chassis ground source. 2. DARK BLUE Wire: Remote Start Signal Input Connect this wire to the pulsed ground output from the remote alarm system. In most cases, it will be connect...

Page 6 - CYLINDERS

PROGRAMMING AND TESTING: 1. You will notice a 4 position dip switch on board the remote start module. Dip switch #1 and #2 are used to program the Tach Rate. Refer to the chart below for proper setting of these dip switches. 2. Dip switch #3 controls the run time of the AS-9151N. ON = 10 Minute Run ...

Audiovox Manuals