Page 3 - SILENT ARMING - ACTIVE (Must be activated during programming)
Page 3 known as a code grabber, which will receive and store the signal from yourkeychain transmitter and re-transmit at a later time to disarm your system.Your Keeloq Code Hopping transmitters will change their signal every time thebutton is pressed, so when a thief grabs then re-transmits your sig...
Page 4 - PROTECTION WHILE THE SYSTEM IS ARMED
Page 4 þ Siren will not sound. If the siren sounds 3 chirps, then you have left a door, trunk, orhood lid ajar. Simply close the opened entry point to providefull protection o Doors Lock - Optional NOTE: If the optional Headlamp illumination feature has been added, and has been selected for operatio...
Page 7 - MANUALLY OVERRIDING YOUR SYSTEM:; override sequence. Turn the ignition switch to the on position.
Page 7 When the system is in valet mode, all alarm functions are bypassed, however theremote panic feature and remote door locks will remain operational. In addition,the parking lights will flash to indicate locking and unlocking. To use the valetmode, the system must first be disarmed either by usi...
Page 8 - (The siren or horn will beep and the lights will flash one time.)
If the new code was accepted, the unit will report back the newly entered code, byflashing the LED, first indicating the 10ths digit, pause and then the units digit.The unit will report the new code three times with a one second pause betweeneach code, then the system will begin arming. If the LED f...
Page 10 - NOTE: Shock Sensor Icon Is Displayed On The LCD Panel.
R F SHOCK SENSOR MODE SELECTIONThe way in which your alarm system reacts to threatening vibrations, created byattempts to enter the vehicle by breaking a window, is adjustable by the transmitterimmediately after arming. There are 4 modes of operation that can be selectedby the operator: 1. Normal Op...
Page 12 - TO BEGIN THE AUTOMATIC START UP TIMER
the only means to keep the engine and engine fluids warm is to periodically startthe engine.WARNING! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous car-bon monoxide fumes which can be harmful or fatal if prolonged ...
Page 15 - TRANSCEIVER ICONS AND THEIR INDICATIONS; When Armed, Press the Disarm/Unlock button to
Page 15 TRANSCEIVER ICONS AND THEIR INDICATIONS When Disarmed, Press the Arm/Lock button to Lockand Arm the System. The Lock Icon is displayed onthe LCD panel & the parking lights flash once. When Armed, Press the Disarm/Unlock button to Unlock and Disarm the System. The Unlock Icon isdisplayed ...
Page 20 - SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS
© 2002 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 128-6425 APS 995C SYSTEM FUNCTIONS AT A GLANCE DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING/ACTIVE REARMINGSLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH...PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = I...