Audiovox APS-92BT-CL - Manuals

These factory programmed settings can be prioritized based on an individual's frequency ofuse, (i.e. pressing both buttons simultaneously to activate channel 1, arm/disarm etc.) byfollowing the normal programming instructions below.Please note when changing the button sequences of the factory settin...

6. Move the valet/bypass switch on, then off again.7. The dash mounted L. E. D. will flash 2 times, and the siren will "chirp" one time, indicating that the system is ready to accept programming for channel 2, or the pulsedground output for remote trunk release, remote car starter, etc. 8. Y...

The transmitter incorporates a small red L.E.D. built into the case. This L.E.D. can be usedto indicate battery condition. You will notice a decrease in transmitter range as the batterycondition deteriorates. To replace the battery...1. Remove the transmitter cover by removing the small screw from t...