Audiovox 128-8122 - Manuals

Page 2 - YOUR “ CODE HOPPING “ TRANSMITTERS:; will not

128-8122 2 of 12 Page 2 Your Remote Start Alarm System has many features and available options some of whichare selected at time of installation. For your reference, the list on page 9 of this manualshows what features and options have been installed. Consult your installing dealer foroptions that m...

Page 4 - SILENT DISARMING; transmitter for two seconds.; WHILE THE SYSTEM IS SOUNDING

128-8122 4 of 12 Page 4 NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter buttonis activated, the drivers door only will unlock, pressing the unlock button a secondtime will cause all doors to unlock. If your transmitter has a sperate lock unlockbuttons, pres...

Page 5 - Programming Your Custom Override Code:; sequence. Turn the ignition switch to the on position.

128-8122 5 of 12 Page 5 door locks will remain operational. To use the valet mode, the system must first be disarmedeither by using your keychain transmitter, or by activating your personalized manual overridecode.1. Enter the vehicle, and turn the ignition key to the on position.2. Press and hold t...

Page 6 - Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.); ELIMINATING THE NORMAL ARM/DISARM CHIRPS

128-8122 6 of 12 Page 6 Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52” you would do thefollowing: 1. Disarm the system by use of the transmitter, or by use of the emergency override sequence. 2. Turn the ignition switch to the on position.3. With...

Page 7 - REMOTE PANIC OPERATION; seconds. The alarm will immediately sound.

128-8122 7 of 12 Page 7 REMOTE PANIC OPERATION The Lock or Unlock button on your keychain transmitter also functions as a panic switch foruse in emergency situations. To use remote panic,1. Press and hold the Lock or Unlock button on the keychain transmitter for 3 or more seconds. The alarm will imm...

Page 8 - REMOTE STARTING THE VEHICLE; The System is in the Remote Start Override mode; To Remote Start The Vehicle:

128-8122 8 of 12 Page 8 With the turbo timer mode selected on, after you've arrived at your destination, while theengine is still running, set the parking brake, pause 2 seconds, then turn the ignition switchto the off position. The engine will continue to run the allotted time according to the sele...

Page 9 - CANCELING THE AUTOMATIC START UP TIMER; Remote Trunk Release

128-8122 9 of 12 Page 9 The parking lights will flash and the siren will chirp 4 times indicating the timed start mode isactivated.The vehicle, on a 2 or 4 hour interval basis, will automatically start, run for the pre-pro-grammed time (5,10,15 or 20 minutes), and then shut off. This will continue f...

Page 12 - SYSTEM FUNCTIONS AT A GLANCE

128-8122 12 of 12 Page 12 © 2007 Audiovox Electronics Corporation, Hauppauge, NY 11788 128-8122 ALARM DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH... PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE ...