Audiovox 128-8122 - Manual
Audiovox 128-8122 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – YOUR “ CODE HOPPING “ TRANSMITTERS:; will not
- Page 4 – SILENT DISARMING; transmitter for two seconds.; WHILE THE SYSTEM IS SOUNDING
- Page 5 – Programming Your Custom Override Code:; sequence. Turn the ignition switch to the on position.
- Page 6 – Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.); ELIMINATING THE NORMAL ARM/DISARM CHIRPS
- Page 7 – REMOTE PANIC OPERATION; seconds. The alarm will immediately sound.
- Page 8 – REMOTE STARTING THE VEHICLE; The System is in the Remote Start Override mode; To Remote Start The Vehicle:
- Page 9 – CANCELING THE AUTOMATIC START UP TIMER; Remote Trunk Release
- Page 12 – SYSTEM FUNCTIONS AT A GLANCE
128-8122
1 of 12
Page 1
Model APS-787a
Owner's Manual
5 Button Remote Start Security System With
Plug-In Shock Sensor & Starter Disable
FEATURES:
2 Five Button Programmable RF Transmitters
Seven Channel Code Learning Receiver (capable of accepting 4 transmitters)
Code Hopping Technology
Selectable Manual Override Mode
Remote Panic in all modes
Protected Valet/Override
Combination Remote Start Safety Control/Valet/Programming Push-Button LED
Switch
Selectable Automatic Timed Start Mode
User Programmable Manual Override Code
7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming
Intrusion Alert with Memory
Audible Arm / Disarm / Defective Zone / Tamper Confirmation
Instant Siren Activation All Entry Points
Starter Disable When Armed
True Last Door Arming
Defective Zone By-Pass
Active or Passive Arming Selectable
Programmable Auto Lock On / Off
Programmable Auto Unlock / Off/Drivers Door/All Doors
Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L
Channel 4, 5, 6, & 7 Output to Control Optional Accessories
Programmable Active or Passive Door Locks
User Programmable Permanent Chirp Delete
On Command RF Chirp Delete from Transmitter Or Selectable Through Software
6 Tone Multi Tone Siren
Car Horn Activation for additional alarm response
Additional Negative Trigger Input
RF Inhibit with ignition on
Parking Light Flasher
Remote Keyless Entry With Optional Access Guard (must have power door locks)
Illuminated Entry
Plug In Dual Stage Shock Sensor
OPTIONS :
Telematic Upgrade Ready
Plug In Flash Logic By-Pass Capable
Remote Trunk Release (must have electronic trunk release)
Multiple Vehicle Capable
Remote Power Window Roll Up
Remote Garage Door Interface
Multiple Vehicle Capable
CAUTION !
Be certain that the vehicle is outdoors before using this or any remote vehicle
starting device. A running engine produces dangerous carbon monoxide fumes
which can be harmful or fatal if prolonged exposure occurs. DO NOT remote
start the vehicle if it is garaged.
From APS787 Change Transmitters to 07SP 05/07
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
128-8122 2 of 12 Page 2 Your Remote Start Alarm System has many features and available options some of whichare selected at time of installation. For your reference, the list on page 9 of this manualshows what features and options have been installed. Consult your installing dealer foroptions that m...
128-8122 4 of 12 Page 4 NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter buttonis activated, the drivers door only will unlock, pressing the unlock button a secondtime will cause all doors to unlock. If your transmitter has a sperate lock unlockbuttons, pres...
128-8122 5 of 12 Page 5 door locks will remain operational. To use the valet mode, the system must first be disarmedeither by using your keychain transmitter, or by activating your personalized manual overridecode.1. Enter the vehicle, and turn the ignition key to the on position.2. Press and hold t...
