Audiovox 128-7853 - Manuals

Audiovox 128-7853 – Manual in PDF format online.

Manuals:

Manual Audiovox 128-7853

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16

Summary

Page 5 - Wiring The 4 Pin Auxiliary Output Harness, Connector “A”; Pulsed Ground Output Before Start

128-7853 5 of 16 5 BLUE Wire: Ignition 1 Output Connect this wire to the ignition 1 wire from the ignition switch. This wire will show +12 voltswhen the ignition key is turned to the "ON" or "RUN" and the "START" or CRANK" positions, andwill have 0 volts when the key is t...

Page 11 - Wire Ground Switched Door Lock Circuits:

128-7853 11 of 16 11 4 Pin Shock Sensor Connector “D” Red, Black Green & Blue wires of the shock sensor harness provide +12 Volts, Ground, FullTrigger, and Pre-Detect inputs to and from the sensor. Route these wires from the previouslyinstalled sensor and connect to the mating connector on the c...

Page 13 - Setting Up The System Programming Features:

128-7853 13 of 16 13 Setting Up The System Programming Features: Bank 1 Transmitter ChannelsStart with the system disarmed, tun the ignition switch to the on position then:1) Press and release the push button valet/program switch 3 times.Siren Chirps once and or Lights flash one time indicating the ...

Audiovox Manuals