AT&T 8403 - Manuals

Issue 1 March 1996 7 7. Go on-hook. To place a call using an automatic dialing button, do the following: 1. Go off-hook. ■ You hear a dial tone. 2. Press , and then press the dial keypad number assigned to the Automatic Dialing button entry you wish to call. For example, to call the number stored in...

8 Issue 1 March 1996 8. Repeat Steps 5 through 7 if you want to program additional items on the same list. 9. Go on-hook when you are finished. Start over with Step 1 if you want to program items on a different personal list. To place a call using a personal list item, do the following: 1. Go off ho...

10 Issue 1 March 1996 Call Forwarding 0 There are two Call Forwarding features you can use: Call Forwarding - All Calls and Call Forwarding - Busy/Don’t Answer. Call Forwarding - All Calls causes calls to your voice terminal to be forwarded immediately to a different telephone number. Call Forwardin...

12 Issue 1 March 1996 Call Park 0 The Call Park feature allows you to park a call on the server, and then recon-nect the call using your voice terminal or a different voice terminal. To park a call at your extension (for retrieval from any extension), do the following: 1. While active on a call, pre...

Issue 1 March 1996 13 2. Dial the Answer Back feature access code _____. ■ You hear a dial tone. 3. Dial the extension number of the person that parked the call. ■ You hear a confirmation tone, and then you are connected to the parked call. Call Pickup 0 The Call Pickup feature allows you to answer ...

14 Issue 1 March 1996 2. Do one of the following: a. Press , and then press the dial keypad number assigned to the Call Pickup feature. b. Press an idle call appearance button, then dial the Call Pickup feature access code _____. ■ You are connected to the incoming call. Conference 0 The Conference ...

16 Issue 1 March 1996 To access a feature assigned to the Feature Directory, press , and then press the corresponding dial keypad number, through , , or . For example, if the Send All Calls feature is assigned to Feature Directory entry F1, you must press , and then press to use this feature. If you...

Issue 1 March 1996 17 Last Number Dialed (Redial) 0 The Last Number Dialed (Redial) feature allows you to redial the last number you dialed. To use the Last Number Dialed feature, do the following: 1. Go off-hook. ■ You hear a dial tone. 2. Do one of the following: a. Press , and then press the dial...

20 Issue 1 March 1996 2. Do one of the following: a. Press , and then press the dial keypad number assigned to the Priority Calling feature. b. Dial the Priority Calling feature access code _____. ■ You hear a dial tone. 3. Dial the extension number. ■ You hear a ringback tone. To change a regular c...

Issue 1 March 1996 21 Self-Test 0 To test the lamps on your voice terminal, do the following: 1. Press and hold . ■ All the lamps go on. 2. Release to end the test. ■ All the lamps go off, except for the lamp, which stays green for a few seconds. Send All Calls 0 The Send All Calls feature immediate...

24 Issue 1 March 1996 To transfer the current call, do the following: 1. Press . ■ The call is placed on hold. ■ You hear a dial tone. 2. Dial the number to which the call is to be transferred. ■ You hear a ringback tone. 3. Remain on the line and announce the call; if there is no answer or the line...