AT&T 2320 - Manual

3 INSTALLATION Base Installation ¥ NOTE: Install the base unit away from electronic equipment, such as personal computers, television sets or micr owave ovens.Avoid excessive heat, cold, dust or moisture. 1 Connect the power cord to the base and an electricaloutlet not controlled by a wall switch. U...

5 Headset You can use this telephone hands-free when you install any industry standard 2.5 mm headset (purchased separately).For best results use an AT&T 2.5 mm headset.Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connect...

6 F e a t u re Setup Menu ¥ NOTE: When you follow the directions to “Clear Message Waiting”or “Set Dial Method” you changesettings for ALL registered handsets.All otherfeatures must be set separately at each handset .(See “About Adding Handsets”on page 2 fordetails about additional handsets.) Press ...

7 Ring Vo l u m e Adjust the volume of the handset ri n ge r. Setting vo l u m eto t u rns the ri n ger off and displays the ri n ger off icon( ) on scre e n . The default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Use the k eypad ...

8 Ring Pattern The external ring pattern sets which ringer you hearwhen you have an outside call. The internal ringpattern sets which ringer you hear when you havean intercom call from another registered handset (ifinstalled). External ring pattern default setting is ;intercom ring pattern default s...

9 Key Click When this feature is on,each key press makes a sound.Default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Press or to select . — OR — Press or to select . 5 Press to save the displa yed setting.

1 0 Handset Name You can customize the handset to display a name orword of your choice (up to 16 characters) in place of • on the idle screen and • (during intercom calls). The default setting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays 4 Use...

1 1 Language Setting You can set each registered handset so the displayappears in English , Spanish, or French. The defaultsetting is . 1 Press . The screen displays 2 Press or until the screen displays 3 Press . The screen displays the cur rent language 4 Press or to scroll through the language cho...

1 2 Clear Message Wa i t i n g If you subscribe to telephone company voice mailservice,and the message waiting indicator remains on even after you ha ve reviewed all messa ges, followthe directions below to turn off the indicator. ¥ NOTE: These steps will clear the message waiting indicator for ALL ...

1 3 Set Dial Method ¥ NOTE: When you change the dial method setting ALL registered handsets are affected. (See “AboutAdding Handsets”on page 2 for details aboutadditional handsets.) This phone comes set for touch tone ( ) dialing. If you ha ve dial pulse (rotary) service, you must set the dial metho...

1 4 TELEPHONE OPERATION Idle Screen When the handset is within range of the base and noton a call or in Feature Setup mode,the screen displays If you assign a name to the handset (see “HandsetName”on page 10),that name will be displayed instead of . Make a Call 1 Press , then dial the number — OR — ...

1 5 Call Timer When the handset is on a call,the screen displays atimer whether the call is external or intercom.For example: Speakerphone When the handset speakerphone is activated, you canuse the phone hands-free. Stand the handset on a flatsurface (not in the base) and continue yourconversation. ...

1 6 Redial The last five phone numbers dialed at the handset are stored in redial memor y.Press repeatedly until the number you want to call is displayed,then press to dial the displa yed number — OR — Press , then press repeatedly until the number you want to call is displayed. Press to dial the di...

1 7 Page/Handset Locator ¥ NOTE: If you have installed additional AT & T 2300 handsets (purchased sep a ra t e ly) with yo u r2320 base, p ressing will signal A L L re gi s t e red handsets. Page the handset(s) from the base by pre s s i n g . The handset will sound a re p e a t i n g t o n e . ...

1 8 DISPLAY SCREEN MESSAGES SCREEN DISPLAYS: WHEN: You have an incoming phone call (without Caller ID). You have an incoming intercom call.The screen also shows the calling location (for example, ). This handset is not registered to the base. A new uncharged battery has been installed. Place the han...

1 9 DISPLAY SCREEN ICONS THIS ICON: INDICATES: The handset ringer is turned off.(See “Ring Volume”on page 7 for details.) The battery needs to be recharged. The Caller ID information displa yed is an unreviewed call. NEW There are unreviewed calls in the call log.

2 0 BASE LIGHTS LIGHT: STATUS: INDICATES: CHARGING on Handset is in the base charging IN USE on Handset is on a call IN USE f lash Phone line is disconnected IN USE fast flash Handset registration is in progress

2 1 TONES AND WHAT THEY MEAN TONE: INDICATES: Three quick beeps Handset is out of range of the base One double beep Handset has failed to register with base Two double beeps Handset battery char ge is low One beep Handset registration is complete

2 2 INTERCOM OPERATION ¥ NOTE: The features in this section work onl y if you have installed additional AT&T 2300Expansion Handsets with your AT&T 2320Telephone.(See “About Adding Handsets”on page 2 for more information.) Intercom Calls If you ha ve more than one handset (AT&T 2300, purc...

2 3 Answer an Incoming Call While on anIntercom Call If an incoming call is received while you are using theintercom, you will hear a double beep and the screenwill display call information as usual for 15 seconds.To answer the incoming call,press on either handset. The intercom call is automaticall...

2 4 F o rw a rd a Call If you have installed additional AT&T 2300 handsets( p u rchased separa t e ly) with your 2320 telephone, yo ucan fo r wa rd a call f rom one handset to another withoutannouncing the caller. 1 Press . Your call is put on hold and the screen displays 2 Use or to scroll thro...

2 5 C o n f e rence Calling 1 If one handset is already on a call, you canconnect a second handset to the call bypressing on the second handset — OR — You can first intercom another handset by pressing .,then when the desired handset is highlighted. After the other handsetanswers the intercom call, ...

2 6 PHONEBOOK This telephone can store up to 50 telephone number sand names. Phone book entries a re stored in alphab e t i c a lorder. Storing a number and name in one handsetautomatically stores it in ALL registered handsets. (See“About Adding Handsets”on page 2 for details aboutadditional handset...

2 7 7 Press . The screen displays 8 Enter a name connected with this number,using the chart belo w. You must store a namewith each number. D i a l P re s s e s K e y 1 2 3 4 5 6 7 8 9 1 A B C 2 a b c D E F 3 d e f G H I 4 g h i J K L 5 j k l M N O 6 m n o P Q R S 7 p q r s T U V 8 t u v W X Y Z 9 w ...

2 9 Dial a Number in Phone Book 1 Press . The screen displays the first phone book entr y.Skip to Step 5 . — OR — Press . The screen displays 2 Press . The screen displays 3 Press . The screen displays 4 Press . The screen displays the first phone book entry and looks similar to 5 Enter the first le...

3 0 Edit a Number/Name in Phone Book 1 Press . The screen displays the first phone book entr y.Skip to Step 5 . — OR — Press . The screen displays 2 Press . The screen displays 3 Press . The screen displays 4 Press . The screen displays the first phone book entry and looks similar to 5 Enter the fir...

3 2 Delete a Number/Name from Phone Book 1 Press . The screen displays the first phone book entr y.Skip to Step 5 . — OR — Press . The screen displays 2 Press . The screen displays 3 Press . The screen displays 4 Press . The screen displays the first phone book entry and looks similar to 5 Enter the...

3 4 CALLER ID OPERATION If you subscribe to Caller ID service with your local phone serviceprovider, this phone stores all incoming calls with valid Caller ID information in the call log. Name, number, time and date information can all be stored,if they are sent with the call. Calls are automaticall...

3 5 Review Call Log 1 Press . The screen displays the most recent call in the call log and displays if the call is ne w. Skip to Step 3 . —OR— Press . The screen displays 2 Press . The screen displays the most recent call in the call log and displays if the call is ne w. 3 Press or to scroll through...

3 6 Remove Call Record s Removing a Specific Call Record 1 Press . The screen displays the most recent call in the call log and displays if the call is ne w. Skip to Step 3 . —OR— Press . The screen displays 2 Press . The screen displays the most recent call in the call log and displays if the call ...

3 7 Remove All Call Record s 1 Press . The screen displays the most recent call in the call log and displays if the call is ne w. Skip to Step 3 . —OR— Press . The screen displays 2 Press . The screen displays the most recent call in the call log and displays if the call is ne w. 3 Press and hold (D...

3 8 S t o re a Call Record in Phone Book You can store a number re c e i ved by Caller ID in thetelephone phone book. For call re c o rds without a va l i dname you will be prompted to enter a new name. Yo ucan fo l l ow the directions in “Edit a Number/Name inPhone Book” on page 30 to assign a name...

3 9 Display Dial While you are reviewing the call log, you can dial anumber displayed on the screen. 1 Press . The screen displays the most recent call in the call log and displays if the call is ne w. Skip to Step 3 . —OR— Press . The screen displays 2 Press . The screen displays the most recent ca...

4 0 BATTERIES Battery Life Battery life depends on how far the handset is from the base,and otherenvironmental conditions. ¥ NOTE: For optimum performance, charge your handset on the base every night. Charge the Handset Battery Pack • This battery should remain charged for up to three days. A fullyc...

4 1 Replace the Handset Battery Pack 1 Install the handset battery. Use only AT&T Battery 3301,SKU# 91076. 2 Charge the handset battery . • Place the handset in the base. • Charge the batter y for at least 12 hours. After the first charge,the battery will charge in eight hours. b) Plug the batte...

If you have difficulty operating this phone,try the suggestions below.For Customer Service,visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purc h a s e . TELEPHONE OPERATION PROBLEM SOLUTION If the phone does not • Make sure the power c...

4 3 TELEPHONE OPERATION PROBLEM SOLUTION If you hear noise or • You may be out of range. Move closer to interference when the base. using the phone : • Household appliances plugged into the same circuit as the base can sometimescause interference. Try moving theappliance or the base to another outle...

CALLER ID PROBLEM SOLUTION If the caller’s name • You should call your service provider or phone number is to confirm that you subscribe to not displayed during combined Caller ID with Call Waiting Call Waiting: service. • Caller ID information received during Call Waiting is displa yed only on theh...

4 6 DEFAULT SETTINGS DEFAULT SETTINGS FUNCTION: DEFAULT SETTING: Dial Method Tone Handset Volume 3 Ring Volume 3 External Ring Patter n 0 Intercom Ring Patter n 1 Key Click ON

4 7 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Frequency Range 2400 MHz – 2483 MHz Channels 95 Channel Spacing 864 kHz Output Power 23 dBm Sensitivity -92 dBm Modulation GFSK Operating Temperature 0°C – 50°C Base Unit Voltage 96 – 144 Vrms (AC Voltage, 60Hz) Base Unit Voltage 9 Vdc (AC Adapte...

A answer a call 14 B Base Unit 1battery 40–41battery icon 40 23 C 24 call log 34, 35, 38call record 36, 38–39caller’s name or phone number not displayed 44 Call Waiting 16call-waiting signal 16Caller ID 34 , 38 18, 42 charged batter y 40 18 conference call 25 D Delete a Number/Name from Phone Book 3...