AT&T 1440 - Manual

INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and atelephone jack. This phone requires a modular telephone jack and a standardelectrical outlet (110v AC) not controlled by a wall switch. 2 Install the handset battery. Use only the following AT&T Batte...

4 3 Attach belt clip to the cordless handset (optional). To attach To re m ove Table/Desk Installation Standardelectrical outlet Modular telephone jack 1 Connect thetelephoneline cord. 2 Connect thepower cord. ¥ NOTE: Install the base unit away from electronic equipment such as personal computers, t...

Wall Installation 1 Connect the telephone line cord. 2 Connect the power cord. 3 Mount the base on the wall. 6 4 Follow Steps 3–6 in Table/Desk Installation. a) Align holes on base withmounting studson wall jack. b) Pull base down on mountingstuds until itlocks into place. Modular telephone jack Sta...

7 TELEPHONE OPERATION Make a Call Press , then dial the number — OR — Dial the number (use to backspace and cor rect digits),then press to call. Answer a Call Press any key except . End a Call Press — OR — Place handset in base. Change Channel Press to switch to a clearer channel while on a call. R ...

1 0 Operating Range This cordless telephone operates within the maximum power allowedby the Federal Communications Commission (FCC). Even so, thishandset and base can communicate over only a certain distance —which can vary with the locations of the base and handset, the weather,and the construction...

TELEPHONE MEMORY 1 1 This cordless phone can store 10 telephone numberswith names, each up to 16 digits long in memorylocations you assign (0-9). ¥ NOTE: Press at any time to exit memory dial mode. This cordless phone can store an additional 40telephone numbers with names alphabetically in thedirect...

1 4 Edit a Number/Name Stored in Memory 1 Press . The screen displays 2 Press the memory location key of the entr yyou wish to edit. 3 When the screen displays the number youwant to edit,press . Then press or until flashes. 4 Press . The screen displays the name and number. The flashing cursor appea...

1 6 Dial a Memory Number 1 Press . The screen displays 2 Enter the memory location key of the entr yyou want to dial. 3 Press to dial the displa yed memor y number. 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 16

TELEPHONE DIRECTORY 1 7 This cordless phone can store 40 telephone numberswith names,each up to 16 digits long. Entries arestored alphabetically. ¥ NOTE: Press at any time to exit director y. Store a Number/Name in the Directory 1 Press . The screen displays 2 Press . The screen displays 3 Using the...

2 1 Dial a Number from the Directory 1 Press (DIR). The screen displays 2 Press or to scroll alphabetically through entries stored in memor y —OR— Press the dial pad k ey for the first letter of theentry you want to dial. 3 When the screen displays the number youwant to dial,press . Then press or un...

CALLER ID OPERATION About Call Histor y If you subscribe to Caller ID service with your local phone serviceprovider, this phone stores all incoming calls (up to 99 at the handset)with valid Caller ID information in the call log. Name, number, time anddate information can all be stored, if they are s...

2 4 Delete Records from Call History Delete a Specific Call 1 Locate the record you want to delete from callhistory. 2 Press , then press or until flashes. 3 Press . The screen displays The current choice flashes. 4 Press or until f lashes. 5 Press . You’ll hear a long beep confirming the deletion. ...

2 5 Dial a Displayed Number 1 Locate the record in call history that you wantto dial. 2 If you wish to change how the number isdialed,press .The screen displays any alternate dialingsequences available for this call (area code +number; 1 + area code + number; numberonly;1+ number). 3 When the number...

2 7 DISPLAY SCREEN MESSAGES SCREEN DISPLAYS: WHEN: The other party is blocking nameand/or number information. Your phone company is unable tore c e i ve info rmation about this caller’sname and/or nu m b e r. There is a call coming in. The handset is waiting for a dial tone. The handset is in use. T...

2 8 BATTERIES Charge the Handset Battery Pack • This battery should remain charged up to six days with the ringerturned on and up to 10 days with the ringer off. A fully chargedbattery pr ovides an a verage talk time of about 10 hours. • The battery pack needs charging when:— A new battery is instal...

2 9 Replacing the Handset Battery Pack 1 Remove the battery compartment cover on the handset b y pressing on the indentation and sliding the cover downward. 2 Lift out the old battery pack and disconnect. 3 Align the two holes in the new battery pack’s plug with the socket pins,and snap the plug int...

3 0 If you have difficulty operating this phone,try the suggestions below.For Customer Service,visit our website at www.telephones.att.com or call 1–800–222–3111. Please retain your receipt as your proof of p u rc h a s e . TELEPHONE OPERATION PROBLEM SOLUTION If the phone doesn’t • Make sure the AC...

3 4 DEFAULT SETTINGS FUNCTION: DEFAULT SETTING: Dial Method Tone Handset Volume 1 Ringer Melody RINGER: 1 Clock 1/01 12:00AM DEFAULT SETTINGS 91-5393-20-00_ATT1440_R0 2003.3.7 10:48 AM Page 34

3 5 TECHNICAL SPECIFICATIONS RF Frequency Band 912.75 MHz – 917.10 MHz (Handset to base) RF Frequency Band 2411.15 MHz – 2418.40 MHz (Base to handset) Channels 30 Modulation FM Operating Temperature 0°C – 50°C Base Unit Voltage 104 – 129 Vrms Base Unit Voltage 9 Vdc @ 300mA (AC Adapter Output) Hands...

3 6 INDEX A answer a call 7 B Base Unit 1 C Call history 22,23,24,25,26Call Waiting 7Caller ID 2,22Charge the handset battery 5 D Date 5Delete a Number/Name 15,20Delete Records 24Dial a Number 16,21,25dialing mode 5display screen message 27 E Edit a Number/Name 14,19 F Flash 7 H Handset 1, 7, 10hand...