APC SURTA3000XL - Manuals - manualsarea.com

Page 3 - Introduction/Before Installation; About this Manual; and the APC Web site,; Contact Information; Refer to; Safety Information; Warning; bodily injury or equipment damage.; cm

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 3 Introduction/Before Installation Introduction/Before Installation About this Manual The APC Smart-UPS ® RT (SURTA2400XLJ/SURTA3000XL/SURTA3000XLTW) is a high-performance Uninterruptible Power Supply (UPS) designed to prevent blackouts, bro...

Page 4 - Installation; Equipment to the UPS” on page 4.; To Install the UPS in a Rack; Replacement Battery” on page 12 for the procedure.; To Install the UPS in a Tower Configuration; the feet may result in bodily injury or equipment damage.; To Install the UPS with External Battery Pack(s); power circuits. See step 1 on page 5 for procedure.

4 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Installation Installation Refer to instructions below for information on how to install the UPS in a rack, in a tower configuration, or when installing the UPS with optional battery pack(s). Once the UPS has been placed in the desired towe...

Page 5 - pack to the TVSS screw.

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 5 Installation 1. Connect ground cable of voltage surge-suppression equipment or the optional Smart-UPS RT battery pack to the TVSS screw. 2. Add optional accessories to the Smart-Slot. a. Remove the cover and screws. Discard or save cover. ...

Page 6 - circuit, properly isolated from the utility.; Connect the Battery and Install the Front Bezel; Install the front bezel; Connect Power and Start Up the UPS; will not be powered until the UPS is turned on.

6 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Installation If Required, Connect the Emergency Power Off (EPO) Feature The EPO interface is a safety extra low voltage (SELV) circuit. Connect it only to other SELV circuits. To avoid damage to the UPS, do not connect the EPO interface to...

Page 7 - button on the front panel.; For Additional Computer System Security; For additional computer system security, install PowerChute; Terminal Mode Configuration

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 7 Terminal Mode Configuration Avoid using extension cords when connecting equipment to and from the UPS. 1. Ensure that equipment is connected to the UPS.2. Only use a power cord to plug the UPS into a two-pole three-wire grounded receptable...

Page 8 - Operation; Display Panel

8 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Operation Operation Display Panel Display Panel Indicators Indicator LED Indicator Title Description On Line The UPS is supplying utility power to the connected equipment. On Battery The UPS is supplying battery power to the connected equi...

Page 9 - Display Panel Functions; If PowerChute is not being used,; Utility Voltage Measurement; Press and hold the

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 9 Operation Display Panel Functions On Battery Operation The UPS switches to battery operation automatically if the utility power fails. While running On Battery, an alarm beeps four times every 30 seconds.Press the button to silence this al...

Page 10 - Configuration Settings

10 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Configuration Settings Configuration Settings Settings are adjusted through PowerChute software, optional SmartSlot accessory cards, or in terminal mode. Function Factory Default User Selectable Choices Description AutomaticSelf-Test Ever...

Page 14 - Transporting the UPS to Another Location

14 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Storage, Maintenance, Transport, and Service 1. Install the replacement battery modules in the UPS. a. Install the bottom and top battery modules. b. Connect the battery modules . c. Push in the battery connectors . d. Lift up the battery...

Page 15 - Service; Troubleshooting; Problem and/or Possible Cause

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 15 Troubleshooting Service Always DISCONNECT THE BATTERY before shipping the UPS to be in compliance with U.S. Department of Transportation (DOT) regulations. If the UPS requires service do not return it to the dealer. Follow these steps:1. ...

Page 16 - UPS is not providing expected backup time; replace battery

16 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Troubleshooting Normal UPS operation when running On Battery. None: The UPS is protecting the connected equipment. Press the button to silence this alarm. UPS is not providing expected backup time The UPS battery is weak due to a recent p...

Page 17 - There is no utility power

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 17 Troubleshooting Fault and Overload LEDs illuminated and UPS emits a sustained alarm tone (Refer to “Display Panel Indicators” on page 8.) The UPS has ceased sending power to connected equipment. The connected equipment exceeds the specifi...

Page 18 - Radio Frequency, Regulatory, Warranty, and Copyright Information; Radio Frequency Warning; There is no LED illumination.

18 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Radio Frequency, Regulatory, Warranty, and Copyright Information Radio Frequency, Regulatory, Warranty, and Copyright Information Radio Frequency Warning This equipment has been tested and found to comply with the limits for a Class A dig...

Page 19 - Limited Warranty

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 19 Radio Frequency, Regulatory, Warranty, and Copyright Information Limited Warranty American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purcha...