APC SURTA3000XL - Manual

APC SURTA3000XL

APC SURTA3000XL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
Page: / 19

Table of Contents:

  • Page 3 – Introduction/Before Installation; About this Manual; and the APC Web site,; Contact Information; Refer to; Safety Information; Warning; bodily injury or equipment damage.; cm
  • Page 4 – Installation; Equipment to the UPS” on page 4.; To Install the UPS in a Rack; Replacement Battery” on page 12 for the procedure.; To Install the UPS in a Tower Configuration; the feet may result in bodily injury or equipment damage.; To Install the UPS with External Battery Pack(s); power circuits. See step 1 on page 5 for procedure.
  • Page 5 – pack to the TVSS screw.
  • Page 6 – circuit, properly isolated from the utility.; Connect the Battery and Install the Front Bezel; Install the front bezel; Connect Power and Start Up the UPS; will not be powered until the UPS is turned on.
  • Page 7 – button on the front panel.; For Additional Computer System Security; For additional computer system security, install PowerChute; Terminal Mode Configuration
  • Page 8 – Operation; Display Panel
  • Page 9 – Display Panel Functions; If PowerChute is not being used,; Utility Voltage Measurement; Press and hold the
  • Page 10 – Configuration Settings
  • Page 14 – Transporting the UPS to Another Location
  • Page 15 – Service; Troubleshooting; Problem and/or Possible Cause
  • Page 16 – UPS is not providing expected backup time; replace battery
  • Page 17 – There is no utility power
  • Page 18 – Radio Frequency, Regulatory, Warranty, and Copyright Information; Radio Frequency Warning; There is no LED illumination.
  • Page 19 – Limited Warranty
Loading the manual

990-2233A

02/2005

APC Smart-UPS

2400/3000 VA

100/110-120 VAC 3U

Tower/Rack Mount

Uninterruptible Power Supply

User Manual

English

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Introduction/Before Installation; About this Manual; and the APC Web site,; Contact Information; Refer to; Safety Information; Warning; bodily injury or equipment damage.; cm

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 3 Introduction/Before Installation Introduction/Before Installation About this Manual The APC Smart-UPS ® RT (SURTA2400XLJ/SURTA3000XL/SURTA3000XLTW) is a high-performance Uninterruptible Power Supply (UPS) designed to prevent blackouts, bro...

Page 4 - Installation; Equipment to the UPS” on page 4.; To Install the UPS in a Rack; Replacement Battery” on page 12 for the procedure.; To Install the UPS in a Tower Configuration; the feet may result in bodily injury or equipment damage.; To Install the UPS with External Battery Pack(s); power circuits. See step 1 on page 5 for procedure.

4 Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual Installation Installation Refer to instructions below for information on how to install the UPS in a rack, in a tower configuration, or when installing the UPS with optional battery pack(s). Once the UPS has been placed in the desired towe...

Page 5 - pack to the TVSS screw.

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual 5 Installation 1. Connect ground cable of voltage surge-suppression equipment or the optional Smart-UPS RT battery pack to the TVSS screw. 2. Add optional accessories to the Smart-Slot. a. Remove the cover and screws. Discard or save cover. ...

Other APC Models

All APC Other