APC SURTA2000XL - Manual
APC SURTA2000XL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – outside the specified limits.; Installation; To Install the UPS in a Rack; Connectors
- Page 3 – Connect equipment to PDU receptacles
- Page 4 – Connect the Battery and Install the Front Bezel
- Page 5 – Connect Power and Start Up the UPS; Terminal Mode Configuration
- Page 6 – Operation; Display Panel; On Line
- Page 7 – Display Panel Functions
- Page 8 – Utility Voltage Measurement; Configuration Settings
- Page 9 – Function
- Page 11 – Always DISCONNECT THE BATTERY before shipping the UPS to be in
- Page 12 – Troubleshooting; with; replace battery
- Page 13 – Problem and/or Possible Cause
- Page 14 – There is no utility power
- Page 15 – Radio Frequency, Regulatory, Warranty, and Copyright Information; Radio Frequency Warning
APC Smart-UPS
®
RT
SURTA1500XL/SURTA1500XLJ/SURTA2000XL
Uninterruptible Power Supply User Manual
Introduction/Before Installation
About this Manual
The APC Smart-UPS
®
RT (SURTA1500XL, SURTA1500XLJ, and SURTA2000XL) is a high-
performance, Uninterruptible Power Supply (UPS) designed to prevent blackouts, brownouts, sags
and surges from reaching your computers, servers, and other sensitive electronic equipment.
This manual describes procedures on how to properly unpack and install the UPS, connect the battery
and equipment, configure accessories, and start up the system.
Illustrations are representative. Your configuration, including components and optional APC equip-
ment, may be different from the models shown in this manual. The user manual is accessible from the
supplied CD and the APC web site,
www.apc.com
.
Contact Information
Refer to
www.apc.com
to contact APC or for additional information about this product.
Safety Information
Unpacking and Equipment Placement
1. Unpack the equipment. The packaging is recyclable; save it for reuse or dispose of it properly.
2. Inspect the equipment upon receipt. Notify the carrier and dealer if there is damage.
3. Check the package contents:
4. Place the UPS where it will be used.
– Ensure that air vents on the front and rear of the UPS are not blocked.
Warn in g
Read the Safety Guide before you begin the installation, operate the UPS, or
perform equipment maintenance. Failure to comply with safety instructions
could result in bodily injury or equipment damage.
Heavy
The UPS is heavy. Two people are required to lift the UPS.
Select a location sturdy enough to handle the weight of the UPS.
• UPS and front bezel
• UPS literature kit containing:
– product documentation
– safety information
– warranty information
120 V models:
• PowerChute
®
CD
• Serial and USB
communication
cables
100 V models
:
• Serial
communication
cable
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation 2 Smart-UPS RT SURTA1500XL/SURTA1500XLJ/SURTA2000XL Uninterruptible Power Supply User Manual – Do not operate the UPS where there is excessive dust or the temperature or humidity are outside the specified limits. Installation Refer to instructions below for information on how to install...
Installation Smart-UPS RT SURTA1500XL/SURTA1500XLJ/SURTA2000XL Uninterruptible Power Supply User Manual 3 1. Connect equipment to PDU receptacles . 2. If applicable, connect equipment to the serial or USB com port . 3. Connect ground cable of voltage surge-suppression equipment or the optional S...
Installation 4 Smart-UPS RT SURTA1500XL/SURTA1500XLJ/SURTA2000XL Uninterruptible Power Supply User Manual The EPO feature provides immediate de-energizing of the UPS and connected equipment from a remote location, without switching to battery operation. 1. Use one of the following cable types to con...
