APC PDU - Manuals

APC PDU – Manual in PDF format online.

Manuals:

Manual APC PDU

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Installation; How to mount the board in the PDU.; Insert the three socket-head screws into the; Note; Secure the board to the mounting brackets with a

Installation and Configuration 2 Branch Current Monitoring Kit Installation How to mount the board in the PDU. 1. Insert the three socket-head screws into the board and attach the retainers to the screws. 2. Attach the board to any of the four sets of mounting brackets inside the PDU. Note The front...

Page 3 - How to route power cable wires.; ) to the closest open termination point on the Neutral Bar.

Installation and Configuration Branch Current Monitoring Kit 3 How to route power cable wires. 1. Route the phase conductor through a current sensor. If it is a three-phase cable, route each of the L1, L2, and L3 wires through its own current sensor. 2. Connect the L1, L2, and L3 wires to single-pol...

Page 4 - How to connect the board to the monitoring unit.; Plug one end of the monitoring cable into the port on the board.; Location of Board; Upper-left side of PDU

Installation and Configuration 4 Branch Current Monitoring Kit How to connect the board to the monitoring unit. 1. Plug one end of the monitoring cable into the port on the board. 2. Plug the other end of the cable into a port on the PDU monitoring unit. Note If the board is on the left side of the ...

APC Manuals