APC AP7610 - Manuals - manualsarea.com

Page 3 - Safety and Grounding

Rack Power Distribution Unit — AP7610 3 Safety and Grounding Read the following information before installing or operating your APC AP7610 Rack PDU: • The Rack PDU is intended only for use with four-wire grounded connections on APC Uninterruptible Power Supplies (UPS). Do not plug the Rack PDU into ...

Page 4 - How to Install the PDU; Overview

4 Rack Power Distribution Unit — AP7610 How to Install the PDU Overview Install the AP7610 Rack PDU in the rear, top two U-spaces of a rack or enclosure for overhead wiring, or in the rear, bottom two U-spaces for under-floor wiring. To install the Rack PDU in a NetShelter ® Standard Enclosure: 1. A...

Page 6 - Operation; Display interface

6 Rack Power Distribution Unit — AP7610 Operation Display interface Control button:• Press to change the phase of the current displayed on the digital display. • Press and hold for five seconds to view the orientation; hold for an additional five seconds to change the orientation. Display of the cur...

Page 7 - Alarm conditions

Operation Rack Power Distribution Unit — AP7610 7 Rear of AP7610 Alarm conditions Configure warning and alarm limits through the internal menus, using a serial port connection. The Rack PDU shows warning and alarm conditions as follows: Serial port: Access internal menus by connecting this port (RJ-...

Page 8 - Rack PDU Configuration

8 Rack Power Distribution Unit — AP7610 Rack PDU Configuration How to configure through a serial port connection 1. Connect an available serial port on your computer to the serial port on the Rack PDU (shown below), using the supplied configuration cable (940-0144). 2. Run a terminal emulation progr...

Page 9 - Using the menus

Rack PDU Configuration Rack Power Distribution Unit — AP7610 9 Using the menus To view a menu, type the associated number and press E NTER . Users can view all data, but only administrators can configure parameters. The main menu has the following options: Status Information option Status Informatio...

Page 10 - Device Data option

Rack PDU Configuration 10 Rack Power Distribution Unit — AP7610 Rack PDU Configuration option Rack PDU Configuration , main menu option 2, provides the following options: Settings are displayed for each phase. • To change a warning and alarm threshold, type the number of the setting, press E NTER , ...

Page 11 - Factory Data option; Factory Data; Logout option

Rack PDU Configuration Rack Power Distribution Unit — AP7610 11 To change as setting: 1. Type 1 , and press E NTER to move the arrow cursor to the next setting. 2. Type 2 , and press E NTER to change the selected setting. 3. Type the new value, and press E NTER . Factory Data option Factory Data , m...

Page 12 - How to Download Firmware to a Rack PDU

12 Rack Power Distribution Unit — AP7610 How to Download Firmware to a Rack PDU 1. Go to www.apc.com/tools/download/ to see if there is a more recent firmware version for your type of Rack PDU. 2. Access the Rack PDU internal menus through a serial port connection. 3. Log on to the Rack PDU as an Ad...

Page 13 - Specifications

Rack Power Distribution Unit — AP7610 13 Specifications AP7610 Electrical Input connector NEMA L21-20 plug Output connectors Three NEMA L5-20 outlet; Three NEMA L6-20 outlet Nominal input voltage 208 (3PH) Acceptable input voltage 100–125/200–250 VAC Maximum Input Current (per phase) 16 A Load Capac...

Page 15 - Radio Frequency Interference; この装置は規定に準拠しています。

Radio Frequency Interference This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial e...

Page 16 - APC Worldwide Customer Support

*990-1474* APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to find answers to frequently asked questions ( FAQ s), to access documents in the APC Knowledge Base, and to submit customer ...