APC AP7610 - Manual
APC AP7610 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Safety and Grounding
- Page 4 – How to Install the PDU; Overview
- Page 6 – Operation; Display interface
- Page 7 – Alarm conditions
- Page 8 – Rack PDU Configuration
- Page 9 – Using the menus
- Page 10 – Device Data option
- Page 11 – Factory Data option; Factory Data; Logout option
- Page 12 – How to Download Firmware to a Rack PDU
- Page 13 – Specifications
- Page 15 – Radio Frequency Interference; この装置は規定に準拠しています。
- Page 16 – APC Worldwide Customer Support
Rack Power Distribution Unit — AP7610
Product Description and Inventory
Description
The AP7610 Rack PDU mounts horizontally in any standard 19-inch
EIA-310-compliant rack or enclosure. This Rack PDU is metered —
equipped with a sensor that measures the current being used by the Rack
PDU and any devices connected to it. The value shown on the display
interface is the aggregate current of an individual phase. This value will
generate an alarm if it is outside the threshold values that you define.
This Rack PDU has three L5-20 outlets, three L6-20 outlets, and a
L21-20 plug.
Inventory
Description
Part Number
Quantity
Serial cable
940-0144
1
Rack-mount brackets
870-1466
2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Rack Power Distribution Unit — AP7610 3 Safety and Grounding Read the following information before installing or operating your APC AP7610 Rack PDU: • The Rack PDU is intended only for use with four-wire grounded connections on APC Uninterruptible Power Supplies (UPS). Do not plug the Rack PDU into ...
4 Rack Power Distribution Unit — AP7610 How to Install the PDU Overview Install the AP7610 Rack PDU in the rear, top two U-spaces of a rack or enclosure for overhead wiring, or in the rear, bottom two U-spaces for under-floor wiring. To install the Rack PDU in a NetShelter ® Standard Enclosure: 1. A...
6 Rack Power Distribution Unit — AP7610 Operation Display interface Control button:• Press to change the phase of the current displayed on the digital display. • Press and hold for five seconds to view the orientation; hold for an additional five seconds to change the orientation. Display of the cur...
