Airlink101 AWLH4130 - Manuals

Step 4 Click Next to accept the default destination folder to install the software or click Browse to manually select a different destination folder. Step 5 Click Next at the Select Program Folder screen.

Step 6 Verify “Yes, I want to restart my computer now” is selected and click Finish to restart your computer. Step 7 After restarting the computer, Windows will automatically detect the PCI adapter and install the driver for it. 2.2 Verify Driver Installation To verify if the driver has been install...

Step 3 Expand Network adapters and verify that Airlink101 SuperG Wireless PCI Adapter is in the list and that no yellow question mark or exclamation mark is beside it.

2.3 Configure the PCI Adapter Note to Windows XP Users: You must disable the Wireless Zero Configuration Utility in order to use the WLAN Monitor. Please refer to the following steps to disable the Wireless Zero Configuration Utility. Step 1 Double-click on the Wireless Network Connection Icon in th...

Step 3 To open the PCI Adapter’s utility, double-click on the WLAN Monitor Icon in the system tray. The utility automatically adds an available wireless network to the Preferred WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the following steps to join the appropriate wirel...

Step 5 You will be prompted for the security key if you have one setup for your wireless network. Verify the key you enter is correct and click Connect . Step 6 Verify the SSID you have selected is in the Preferred WLANs box and click Apply . Note: Be sure to remove the wrong SSID from the Preferred...

Step 7 A blue circle will surround the SSID you have chosen. Click OK . Congratulations! The installation for your Super G PCI Adapter is complete. 3. Configure the WLAN Monitor This section describes the various functions of the WLAN Monitor that you can configure, including the settings of wireles...

3.2 Configuring WEP Encryption The following screen will appear after you click on the Properties button from the Preferred WLANs box.

If your existing wireless network has WEP encryption enabled, you need to configure the wireless adapter with the identical encryption settings in order to establish a connection. Step 1 Verify that the Wireless network name matches the SSID of the Access Point you’re trying to connect to. Step 2 Ve...

Step 3 Enter a passphare in the WPA Passphrase field and click OK . (Note: the passphrase must be between 8 – 63 characters long). 3.4 Status Tab Under the Status Tab you will find information on the connection state, hardware information, and advanced state.

a peer network client without the use of an access point Infrastructure: for connecting to an access point only Ad-Hoc : for connecting directly to another wireless client without using an Access Point or wireless router. (Both wireless clients must be set to using Ad-Hoc mode). Automatically connec...

Appendix - Technical Specifications Standards • IEEE 802.11b/g, Atheros Super G ™ Interface • PCI Local Bus 2.2 • Low profile and half length • PCI 32 bit Chipset • Atheros Frequency Band • 2.400~2.497GHz (Industrial Scientific Medical Band) Media Access Protocol • CSMA/CA with ACK Antenna Type • Om...

Technical Support E-mail: [email protected] Toll-Free: 1-888-746-3238 Web Site: www.airlink101.com *Super G™ technology (108 Mbps) can only be obtained when using products with Atheros Super G™ chipset. *Theoretical maximum wireless signal rate based on Atheros Super G™ and IEEE standard 802.11...