Airlink101 ATVC102 - Manuals

Page 2 - TABLE OF CONTENTS

1 TABLE OF CONTENTS 1. IMPORTANT INFORMATION ........................................................................ 3 2. ACCESSORIES .............................................................................................. 5 3. FRONT PANEL.........................................................

Page 3 - Introduction

2 Introduction Congratulations on your purchase of Airlink101® Digital to Analog TV Converter Box with Analog Pass-Through, ATVC102. At midnight on February 17, 2009, all full-power television stations in the United States will stop broadcasting in analog and switch to 100% digital broadcasting, whi...

Page 4 - IMPORTANT INFORMATION; C AU TION; RISK OF ELECTRIC

3 1. IMPORTANT INFORMATION WARNING: Do not use this product where contact with or immersion in water is a possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc. WARNING: Do not put a candle or lamp stand on the cabinet as this creates a fire hazard. WA...

Page 5 - The power supply for this device is UL Approved.

4 Object and Liquid Entry: Never put objects of any kind into this unit through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never pour or spill any liquid on the unit. Note: Moisture may be formed on the power indicator lens ...

Page 6 - Green

5 2. ACCESSORIES • Remote Control with 2 AAA Batteries • Power Adapter: AC Input 110V~120V, DC Output 12V/1A • 1x RF/Coaxial Cable • 1x Mini-to-RCA Cable • User’s Manual 3. FRONT PANEL 1. Power Indicator Green light: ON Red light: STANDBY 2. Power button Press Æ ON Press Æ OFF

Page 8 - SETUP

7 directly 10. : Used to enter a dash “-“ in the chanel number 11. POWER on/off: Turns the receiver ON/OFF 12. ZOOM: Switches the screen format (Full/Letter/Center) 13. SIGNAL: Activates the signal meter 14. FAV: Shows the current list of favorite channels Press multiple times to scroll through list...

Page 10 - please go to

9 3. Power Adapter Connection Plug the power adapter into a wall outlet. Connect the other end to the “DC IN” Jack on the device. 4. Analog Pass Through Analog pass-through is enabled when you connect your TV following Section 6-2 (RF Cable). This device will pass through analog TV signals from ‘‘AN...

Page 17 - Menus; Favorite List Editor

16 8. Menus Press the Menu button on the remote control to display the On Screen Menu (OSM) on your TV screen. 8-1. Menu > Channel > Favorite List Editor : In this menu, you can edit the favorite group. You can also see the current channel list. Press the / key to switch favorite groups. Press...

Page 28 - This menu displays the product name, software version, hardware

27 8-10 Menu>Setup>Info>System Information This menu displays the product name, software version, hardware version, and loader version.

Page 29 - Specifications

28 9. Specifications 1 Tuner and Channel Input Connector: F-type, IEC169-24, Female Frequency: 54 MHz ~ 806 MHz Input Impedance: 75ohm unbalanced Signal Level: -5 to -83 dBm Demodulation: 8VSB 2 System & Memory Main Processor: RTK 2881S Flash Memory: 2 Mbytes DDR: 32 Mbytes Channel Memory: 500 M...

Page 30 - Technical Support

29 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com * Picture quality, reception and channel numbers depend on the television set, type of antenna, weather and distance from station transmitter. Specifications are subject to change without notic...