Airlink101 AR410W - Manuals

Airlink101 AR410W – Manual in PDF format online.

Manuals:

Manual

Manual Airlink101 AR410W

Summary

Page 2 - Table of Contents

2 Table of Contents 1. Overview ..................................................................................................................... 4 1.1 Product Features ................................................................................................... 4 1.2 System Requirements ....

Page 5 - Description; Connecting to the Wireless Router; Note

5 2. Getting Started 2.1 Knowing the 802.11g Wireless Router Ports: (LAN Ports): automatically detect the cable type when connecting to Ethernet-enabled computers. (WAN Port): the connection for the Ethernet cable to the cable or DSL modem. (Power): receptor for the power adapter (Reset): restore th...

Page 6 - WAN; ports that the computer is connected

6 Step 4 Power on the router by connecting one end of the supplied power adapter to the power jack of the router and connecting the other end to an electrical outlet. Step 5 Power on your computer. Step 6 Make sure the WAN , WLAN , and the LAN ports that the computer is connected to are lit. If not,...

Page 10 - Click; Next; at the router’s Setup Wizard.; OR; you may keep the current password (; admin

10 Step 3 Click Next at the router’s Setup Wizard. Note: If you don’t see the Setup Wizard, click on the Wizard button on the menu bar. Step 4 Change the router’s password by removing the bullets and typing in your new password. OR you may keep the current password ( admin ) and click Next .

Page 11 - Select your time zone and click; You may change the router’s LAN settings or just click; to keep the default

11 Step 5 Select your time zone and click Next . Step 6 You may change the router’s LAN settings or just click Next to keep the default settings.

Page 12 - Step 7; should manually select the proper WAN type to configure.; cable modem; users click; and proceed to

12 Step 7 The router will now auto-detect what type of WAN setting your DSL/Cable modem has. You may follow steps 8a through 8f to configure your WAN type. Note: If you are certain that your WAN type is different then from the one detected, you should manually select the proper WAN type to configure...

Page 16 - Restart; to apply the settings.

Page 17 - Verifying Internet Connection

17 3. Verifying Internet Connection Step 1 Login to the router’s configuration page and click on the Status button. Step 2 Verify that the status for the WAN connection says Connected . Note: If the status is disconnected, click on DHCP Renew (for Cable Modem), or Connect (for DSL Modem). If it is s...

Page 18 - Web Configuration Utility; Enter

18 4. Web Configuration Utility Step 1 Open the web browser and type 192.168.1.1 in the URL Address field and press Enter . Step 2 Enter admin for both the username and the password fields and click OK . 4.1.1 LAN & DHCP Server This page enables you to set the LAN and DHCP properties such as the...

Page 19 - Apply; Specify IP; Clone MAC

19 End IP: Enter an IP address to serve as the end of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the router. Domain Name: Enter the local domain name of the network in the text field. This field is optional. Lease Time: Set the lease time for the IP addres...

Page 23 - Super G with Static Turbo:; select to enable or disable the broadcast of the router’s SSID.; ASCII

23 Compression, and Dynamic Turbo. This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all devices on the wireless network are configured with Super G with Dynamic Turbo enabled. Super G with Static Turbo: Capable of Packet Bursting, Fast Fra...

Page 25 - Fragmentation Threshold:; Type the fragmentation threshold in the text box. If packet; Antenna Transmit Power:

25 4.2.3 Advanced This screen enables you to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This val...

Page 27 - DHCP Table; Connect

27 Firmware Version: Displays the current version of the firmware installed. After updating the firmware from Tools - Firmware , check this page to ensure that your firmware is successfully updated. LAN: This field displays the router's LAN interface MAC address, IP address, subnet mask, and DHCP se...

Page 33 - Disabled

33 4.5 Access This page enables you to define access restrictions, set up protocol and IP filters, create virtual servers, define access for special applications such as games, and set firewall rules. 4.5.1 MAC Filters Enables you to allow or deny Internet access to users within the LAN based upon t...

Page 34 - Add; To delete a keyword, select it from the list and click; Delete

34 Add: Click to add the user to the list at the bottom of the page. Update: Click to update information for the user, if you have changed any of the fields. Delete: Select a user from the table at the bottom of the list and click Delete to remove the user profile. 4.5.2 URL Blocking This page allow...

Page 36 - enter the domains you wish to deny access in this field and click

36 4.5.4 Domain Blocking This page allows you to either permit or deny users from accessing certain domains specified in the list. Domain Blocking: choose from Disabled, Allow users to access all domains except “Blocked Domains”, or Deny users to access all domains except “Permitted Domains”. Permit...

Page 38 - New; . Edit the settings then click

38 The most common protocols are listed in the table already. Select the protocol you wish to edit. Protocol Filter: Disable List: disables protocol filter Enable List: enables protocol filter. If this is selected, the router will deny Internet access to those protocols that have the filter marked e...

Page 45 - Save; Browse; Restore Factory Default Settings:

45 4.7.2 Settings This screen enables you to save your settings as a profile and load the profiles for different circumstances. You can also load the factory default settings. Save Settings: After you have configured all the settings, click Save to save the current configuration as a profile so that...

Page 46 - Upgrade; to update the firmware to the latest release.; Status

46 Please follow the instructions below: 1. Download the latest firmware from the manufacturer’s web site and save it to your disk. 2. Unzip the downloaded file. 3. Click Browse and go to the location of the unzipped firmware file. 4. Select the file and click Upgrade to update the firmware to the l...

Page 48 - For Cable Modem and DSL Users; Power off the Cable/DSL modem, router, and computer and wait for; minutes; Turn on the computer.; Section 3, Verifying Internet; Appendix; Technical Support

48 For Cable Modem and DSL Users Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes . Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down. Step 3 Turn on the router and wait for the lights on the router to settle down. Step 4 Turn on ...