Airlink101 AICP310 - Manuals

Page 2 - the User’s Manual on the supplied CD.; Getting Started; Step 1; Connect one end of a network cable to the IP Camera and connect the; Step 2; Installing the Setup Wizard; Insert the provided CD and wait for the autorun screen to appear.; Install Setup Wizard; Section 1

This Quick Installation Guide only provides basic instructions. For detailed information on using this product and the software IPView Pro, please refer to the User’s Manual on the supplied CD. Getting Started Step 1 Connect one end of a network cable to the IP Camera and connect the other end to on...

Page 3 - Click; Next

Note: If the autorun screen does not appear automatically, go to Start, Run, type D:\Wizard\Setup.exe (where D is the letter of your CD drive) and click OK. Step 3 Click Next .

Page 4 - Yes; to accept the License Agreement.; to accept the default Destination Folder.

Step 4 Click Yes to accept the License Agreement. Step 5 Click Next to accept the default Destination Folder.

Page 5 - Finish; to complete the installation.; Using the Setup Wizard; Go to; AirLink101 IP Camera Setup Wizard; Section 3

Step 6 Click Finish to complete the installation. Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard > AirLink101 IP Camera Setup Wizard . Section 3

Page 6 - Wizard

Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button.

Page 7 - message will appear. Click; to continue. If you do not receive this message,; admin; for both the Admin ID and Password and click; OK

Step 3 If the Camera’s default IP address is on a different subnet, the following message will appear. Click Yes to continue. If you do not receive this message, skip to Step 6 . Step 4 Enter admin for both the Admin ID and Password and click OK . Step 5 The Wizard will automatically generate an IP ...

Page 9 - If you need to change the Camera’s IP address because another; Verify that all the fields are correct and click; Restart; to save the settings

Step 7 If you need to change the Camera’s IP address because another network device is already using the same address, you can assign a new address here and click Next . Step 8 Verify that all the fields are correct and click Restart to save the settings and reboot the camera.

Page 10 - Viewing Images; the; Web Config; username and password are both; dmin”; Section 4

Viewing Images Step 1 At the Setup Wizard, select the desired camera from the list and click on the Web Config button. Step 2 Enter the username and password for the network camera. The default username and password are both “ a dmin” . Section 4

Page 11 - Step 3; The web based viewing page will appear. You can view live video by; ActiveX Mode

Step 3 The web based viewing page will appear. You can view live video by selecting either the ActiveX Mode (Internet Explorer only) or the Java Mode (Internet Explorer and Netscape).

Page 12 - Step 4; If you select ActiveX Mode, you may be prompt to install the ActiveX; Click on; Install

Step 4 If you select ActiveX Mode, you may be prompt to install the ActiveX Control. Click on the yellow bar to on the top of the screen and click on Install ActiveX Control . Step 5 Click on Install .

Page 13 - Step 6; You can focus the camera by turning the camera’s lens clockwise or; Step 7; If you need to install Java Virtual Machine on your computer, do not

Step 6 You can focus the camera by turning the camera’s lens clockwise or counter-clockwise. Note: ActiveX and/or Java Applet must be installed and enabled on your Web Browser (Internet Explorer or Netscape) before you can view the live videos. For more information please refer to the User’s Manual ...

Page 14 - Technical Support; Section 5

Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Website: www.airlink101.com *Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products and trademarks a...