Airlink101 AICN747 - Manuals

Page 2 - Getting Started; Step 1; Connect one end of the Ethernet cable to the IP Camera and connect; Step 2; Power on the IP Camera by connecting one end of supplied power; Step 3; Section 1; Package Contents

This Quick Installation Guide only provides basic instructions. For detailed information on using this product, please refer to the User’s Manual on the supplied CD. Getting Started Step 1 Connect one end of the Ethernet cable to the IP Camera and connect the other end to one of the LAN ports on you...

Page 3 - Installing the SkyIPCam Utility; Insert the provided CD and wait for the auto-run screen to appear.; Install SkyIPCam Utility; Section 2

Installing the SkyIPCam Utility Step 1 Insert the provided CD and wait for the auto-run screen to appear. Step 2 Click on Install SkyIPCam Utility . Note: If the auto-run screen does not appear automatically, go to Start, Run, type: D:\ Utility\Setup.exe (where D is the letter of your CD drive) and ...

Page 4 - Keep clicking; Next; on the following screens.; Close; to complete the installation.

Step 3 Keep clicking Next on the following screens. Step 4 Click Close to complete the installation.

Page 5 - Using the SkyIPCam Utility; Go to; Utiliy; : If the Camera’s IP address does not show up in the window, make sure; Search; Section 3

Using the SkyIPCam Utility Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy Step 2 Select the IP Camera you want to configure from the list and click on the Change IP button. Note : If the Camera’s IP address does not show up in the window, make sure the camera ...

Page 7 - Step 5; When you are prompted for the username and password, enter

Step 5 When you are prompted for the username and password, enter “admin” for both User name and Password , and click OK . Step 6 The camera viewing window will appear. Click on Setup , and then click on Smart Wizard .

Page 8 - Step 7

Step 7 You may change the default Camera Name and enter a name for the Location if you like. Then enter “admin” for both Admin Password and Confirm Password . Click Next . Step 8 You can change the camera’s IP settings in the below window. If you have done this in Step 3, click Next and go to the ne...

Page 9 - and the configuration is completed.

Step 9 If you would like to set up email alerts that you can receive in the future, enter your email information here. You can get this information from your internet service provider. You can also set this up at a later time. Click Next . Step 10 Confirm your settings at the last window. If everyth...

Page 10 - Viewing Images; If you know the IP address of your network camera, you may open the; Enter; “admin”; for both the; User name; and; Password; Section 4

Viewing Images Method 1 --- Access from “Web Browser” Step 1 If you know the IP address of your network camera, you may open the Web Browser on your computer. Step 2 Type the IP address of your camera (the default IP is 192.168.1.240) in the Address bar, and then press [Enter]. Step 3 Enter “admin” ...

Page 11 - Click on; Install; , and then you may be able to view images.

Step 4 If it is the first time for your computer to access the Web based viewing page, you may be prompted to install the software of ActiveX Control. Click on the bar on top of the screen and click on Install ActiveX Control . Step 5 Click on Install , and then you may be able to view images.

Page 12 - Step 6; To get a clear view of images, you may simply rotate the camera’s lens

Step 6 To get a clear view of images, you may simply rotate the camera’s lens clockwise or counter-clockwise to adjust the focus.

Page 14 - , and open the Airlink101 SkyIPCam Utility.; Select your camera from the list and click; Link; Follow Step 3 to Step 6 mentioned in Method 1.

Method 2 --- Access from “SkyIPCam Utility” Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy , and open the Airlink101 SkyIPCam Utility. Step 2 Select your camera from the list and click Link Step 3 Follow Step 3 to Step 6 mentioned in Method 1.