AEG 50212 - Manuals

5 Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection” . • If the appliance is delivered in the winter months when there are mi-nus temperatures: Store the washing machine at room temperature for 24 hours before using for the f...

6 General safety • Repairs to the washing machine must only be carried out by qualified service engineers. • Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. • Switch o...

8 Programme overview Programme m a x. lo ad 1) (d ry w ash in g) 1) A 10 litre bucket contains approximately 2.5 kg of dry washing (cotton) Programme options Spin speed (RINSE HOLD) (P RE W A SH) (ST A IN ) 1 0 00 (L 50 6 1 2) 85 0 (L 5 0 2 1 2 ) 60 0 ECO (ENERGY SAVING) 2) 2) Programme settings for...

10 Before the first wash 1. Open the detergent dispenser drawer. 2. Pour about 2 litres of water through the detergent dispenser drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly. 3. In order to remove any ...

11 Running a washing cycle Opening the door/Loading the washing 1. To open the door: pull the door’s handle.When the appliance is switched on, the K (DOOR) and (START/ PAUSE) indicators show whether the door can be opened: 2. Separate individual items and load washing loosely into the machine. Mix l...

12 Dosing depends upon: – the washing’s degree of soiling, – the size of the load – the degree of hardness of the water supply. • If the manufacturer does not give instructions for small loads: for a half load, use a third less, for a very small load, use only half of the detergent that is recommend...

13 Switching on the appliance/selecting a programme Set the programme and tempera-ture using the programme knob. 3 By selecting a programme, you switch the appliance on at the same time.The programme progress display indicates the programme steps that the selected programme will perform. Changing th...

15 Setting the delay timer The (DELAY TIMER) button allows you to delay the start of a programme. 1. Select a programme. 2. Press the (DELAY TIMER) button once if you would like the wash programme to begin in 6 hours. The 6h indicator will illuminate. Press the (DELAY TIMER) button twice if you woul...

16 End of the wash programme / Removing the washing When the programme has finished, (END) will illuminate in the pro- gramme progress display. As soon as the (DOOR) indicator has gone out and the (END) indicator is illuminated, the door can be opened. 1. Open the door and remove the washing. 2. Tur...

17 Child safety device When the child safety device is set, the door can no longer be closed. Setting the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di-rection as far as it will go. 1 Warning! The knob must not be sunk-in after being set, otherwise th...

19 What to do if... Remedying minor malfunctions yourself If the programme progress display shows one of the following error messages during operation: – (END) flashes 1x (problem with water inflow), – (END) flashes 2x (problem with water outflow), – (END) flashes 4x (door open), please refer to the...

21 If the wash results are not satisfactory Washing is grey and scale is being deposited in the drum • Too little detergent is being used. • The right detergent was not used. • Special soiling was not pre-treated. • Programme or temperature was not correctly set. There are grey stains on the washing...

22 Carrying out an emergency drain 1 Warning! Before emergency draining, switch off the washing machine and remove the mains plug from the socket. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency ...

23 Drain pump The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e. g. if the pump wheel is blocked. Please make sure before loading the washing that there are no foreign bodies in the pockets or caught b...

24 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recy-cled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal faci...

25 Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Consumption values The consumption ...

26 Installation and connection instructions 1 Safety information for the installation • This washing machine cannot be built-in . • Before using for the first time, check the appliance for damage sus-tained while it was being transported. Do not under any circumstanc-es connect an appliance that is ...

27 • Never transport the appliance without its transport lock. Only remove the transport lock when the appliance is in its place of installation. Transporting the appliance without its transport lock can lead to damage to the appliance. • Never lift the appliance by the door when it is open nor by t...

29 7. Open the porthole and remove the polystyrene block fitted with the ad-hesive tape on the door seal. 8. Fill the smaller upper hole and the two large ones with the correspond-ing plastic plug caps supplied in the bag containing the instruction booklet. Important! All the different plug caps are...

30 Making the appliance level The four feet of the appliance are pre-adjusted. Large degrees of unevenness can be compensated for by individually ad-justing the height adjustable screw feet. Use the special spanner supplied to do this. Important! Do not use pieces of wood, cardboard or such like to ...

31 1. Open the porthole and extract the inlet hose. 2. Connect the hose with the angled connection to the machine. Important!Do not place the inlet hose down-wards. Angle the hose to the left or right depending on the position of your water tap. 3. Set the hose correctly by loosening the ring nut. A...

32 Water drainage The maximum permitted difference between the height of the surface on which the appliance is installed and the water outlet is 1 metre.Only original hoses may be used to extend hoses. (A maximum of 3 m laid on the floor and then 80 cm vertically). The Customer Care Depart-ment stoc...

33 Guarantee/Customer Service EURO-LINE APPLIANCES LENGTH OF WARRANTY: EURO-LINE WILL PAY FOR: TWO YEAR FULL WARRANTY from original date of purchase, including parts and labour, to the first purchaser of this appliance Replacement parts and/or labour to repair defects in materials or workmanship. Se...

34 User Instructions & Installation Manual Service & Repair To save you time and money please have the following information ready in case you have to call for service: • Name of the dealer from whom you purchased the appliance. _______________________________________________ • Model number ...

35 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instruc-tions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service ...

www.electrolux.com 132 975 730-01-201206-01 Subject to change without notice