AEG 2600D-A/AUS- Manuals

Page 3 - Contents

3 Contents Safety warnings 4 for the user 4 for the installer 4 Description of the Appliance 6 Extractor version 6 Filter Version 6 Control Panel 7 LED Indicator lights for verifying the saturation of filters 8 Led – Indicator for grease filter C 8 Led - indicator for charcoal filter D 8 Resetting t...

Page 4 - Safety warnings; for the user

4 Safety warnings for the user • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal firedcookers it is essential to avoid open flames. • Also, when frying, keep the deep frying pan on the cooker top/cooker under careful control. • The ...

Page 6 - Description of the Appliance; Extractor version; Filter Version

6 Description of the Appliance Extractor version • The hood is supplied as an extractor unit and can also beused with a filtering functionby fitting one charcoal filter(special accessory). • You will need original AEG charcoal filter for this function(see Special Accessories). • The air is discharge...

Page 7 - Control Panel

7 Control Panel • Best result are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated.Turn the hood on a few minutes before you start cooking, you willthen get an under pressure in the kitchen. The hood should be left onafter cooking for about 15 mi...

Page 9 - Maintenance and care; Metal grease filter

9 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Metal grease filter • The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in theexternal evacuat...

Page 10 - Charcoal filter

10 Charcoal filter • The charcoal filter should only be used if you want to use the hood in its filter version. • To do this you will need an original AEG charcoal filter (see special accessories). • Cleaning/replacing the charcoal filter Unlike other charcoal filters, the LONGLIFE charcoal filter c...

Page 12 - Cleaning; Special accessories; Technical assistance service

12 Cleaning • Warning: always disconnect the hood from the mains power supply before cleaning it.Never insert pointed objects in the motor’s protective grid. • Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders. • Only ever clea...

Page 13 - Technical Specifications; Mounting accessories included

13 Technical Specifications Models 9600 D Dimensions (in cm):Height 80-122,5 Width 89,8 Depth 52 Maximum absorbed power: 175 W Motor absorption: 1 x 130 W Lighting: 2 x 20W Length of the cable: 150 cm Mounting accessories included 2 hooks2 metal screws 2,9x136 wood-screws 5x45 mm6 wall plugs Ø 8 mm4...

Page 14 - Electrical connection; Safety warnings for the electrician

14 Electrical connection Safety warnings for the electrician Before connecting the appliance to the power supply, check that thevoltage indicated on the rating plate corresponds to the mains powersupply available. Appliances fitted with a plug can be connected to anystandard power socket within easy...

Page 15 - Mounting – Figure 8

15 Mounting – Figure 8 • Position the template (1) on the wall and mark the position, and drill the holes (2 x Ø 8 mm).Mount the two rawl plugs with the hooks (3) • Hang the hood on the hooks and level it with the adjustment screws (4) • Remove the grease filters (5) and mark for the two screws (6)....