AEG 111 K - W/D/G- Manuals - manualsarea.com

Page 2 - Important Safety Information; Installation; Child Safety; ENGLISH

2 Important Safety Information You MUST read these warnings carefully before installing or using thehob. If you need assistance, contact our Customer Care Department on01635 572700 Installation ● This hob must be installed by qualified personnel, according to themanufacturer’s instructions and to th...

Page 3 - Service

3 ● Do not use this hob if it is in contact with water. Do not operatethe hob with wet hands. ● Ensure the control knobs are in the ‘OFF’ position when not in use. ● When using other electrical appliances, ensure the cable does notcome into contact with the hot surfaces of the cooking appliance. ● U...

Page 4 - Contents

4 Contents Important Safety Information .................................................................... 2 Instructions for the User .............................................................................. 6 Description of the Hob ..............................................................

Page 5 - Guide to Use the instructions

5 This appliance is manufactured according tothe following EEC directives:73/23 EEC - 90/683 EEC - 93/68 EEC -89/336 EEC - 90/396 EEC,current edition. Guide to Use the instructions The following symbols will be found in the text to guide you throughout theInstructions: Safety Instructions Step by st...

Page 6 - Description of the Hob; INSTALLATION; WHEN THE HOB IS FIRST INSTALLED

6 Description of the Hob INSTALLATION The hob must be installed according to the instructions supplied. The hob must be installed by qualified personnel to the relevantBritish Standards. Please, ensure that, once the hob is installed, it is easily accessible forthe engineer in the event of a breakdo...

Page 7 - Operation

7 Operation i ELECTRIC HOTPLATES To switch on a hotplate, turn the relevant control knob anticlockwiseto the required heat setting. The control knob is numbered 1 - 3 0 - OFF 1 - Minimum 3 - Maximum. The hob has four rapid hotplates. The rapid hotplates are indicated bya red dot, and will heat up mo...

Page 8 - Hints and Tips

8 i Hints and Tips Saucepans for use on solid plates should have several characteristics: ● They should be fairly heavyduty ● They should fit the heat areaexactly, or be slightly largerfor efficient use, NEVERsmaller. ● They should have a flat base toensure good contact with theplate. This is partic...

Page 9 - Maintenance and Cleaning

9 Before any maintenance or cleaning can be carried out, you mustDISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can beremoved more easily than if it is left to cool. The Hob Top Regularly wipe over the hob top using a soft cloth well wrun...

Page 10 - Something Not Working?

10 Something Not Working? If the hob is not working correctly, please carry out the following checksbefore contacting your local AEG Service Force Centre. SYMPTOM ■ The plate does not heat up. ■ The plate is not givingsatisfactory results SOLUTION ◆ Check that the unit is plugged inand the electrica...

Page 11 - Service and Spare Parts; CUSTOMER CARE

11 Service and Spare Parts When you contact the Service Centre, they will need the followinginformation: 1. Your name, address and post code. 2. Your telephone number 3. Clear and concise details of the fault 4. The model and the serial number (see rating label on the back of this instruction bookle...

Page 12 - Guarantee Conditions

12 Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handled over to the first retail purchaser, which must be verified by purchase invoice or similardocumentation.The guarantee do...

Page 13 - Instructions for the Installer; Engineer technical data

13 OVERALL DIMENSIONS Width: 580 mm. Depth: 500 mm. Height: 88 mm. Weight: 11 Kg. CUT OUT DIMENSIONS Width: 550 mm. Depth: 470 mm. Thickness: 30 mm. SUPPLY CONNECTIONS Electric:230-240V 50Hz supply. HEATING ELEMENTS RATINGRapid Front Left Hotplate Ø 180 mm. 2090 W Rapid Back Left Hotplate Ø 145 mm. ...

Page 14 - Important safety requirements; Location

14 650 mm 420 mm 420 mm 100 mm 50 mm 50 mm 55 mm 600 mm 700 mm 420 mm 100 mm 420 mm 50 mm 55 mm 50 mm CLEARANCES REQUIRED WHEN FITTING THE HOB WITHOUT A COOKER HOOD ABOVE CLEARANCES REQUIREDWHEN FITTING THE HOB WITH A COOKER HOOD ABOVE FO 0813 FO 0812 700 mm Important safety requirements This hob mu...

Page 15 - Cut Out Size

15 Installation IMPORTANT This hob must be installed by qualified personnel to the relevantBritish Standards. The manufacturer will not accept liability, should the above instructions orany of the other safety instructions incorporated in this book be ignored. Cut Out Size The dimensions of the cut-...

Page 17 - Fitting the hob to the worktop

17 Fitting the hob to the worktop Before fitting the hob into thecut out, a sealing gasketsupplied with the hob must befitted to the edge of the cutout. It is essential that no gapsare left in this seal in order toprevent spillage near the hobseeping into the cabinet below. 1) Place the sealing gask...

Page 18 - Electrical connections

18 Electrical connections Any electrical work required to install this hob should be carried outby a qualified electrician or competent person, in accordance with thecurrent regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not beobserved. Th...

Page 19 - Permanent Connection

19 Connection Min. size Cable / flex Fuse via Cable/flex type • Cooker 6 mm 2 PVC/PVC 30 A Control twin and Circuit earth For Uk use only For Europe use only Min. size Cable/flex Cable / flex type Fuse 2.5 mm 2 H05 RR-F 30 A Permanent Connection In the case of a permanent connection, it is necessary...

Page 20 - Wiring diagram

20 Wiring diagram 4 3 2 1 43125 P 2 P 1 P 3 1 4 3 2 1 43125 P 2 P 1 P 3 2 4 3 2 1 43125 P 2 P 1 P 3 3 4 3 2 1 43125 P 2 P 1 P 3 4 PLATE Ø 180 Ø 180 R Ø 145 R Ø 145 N LL 4 13