2Wire 94245 - Manuals

2Wire 94245 – Manual in PDF format online.

Manuals:

Manual

Manual 2Wire 94245

Summary

Page 2 - SAVe tHIS MANUAL; IMpORtANt SAFetY; general power tool Safety Warnings; the presence of flammable liquids,

Page 2 For technical questions, please call 1-800-444-3353. SKU 94245 SAVe tHIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - under the influence of drugs, alcohol

Page 3 For technical questions, please call 1-800-444-3353. SKU 94245 ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock. do not ...

Page 4 - qualified repair person using only; Circular Saw Safety Warnings

Page 4 For technical questions, please call 1-800-444-3353. SKU 94245 with the switch is dangerous and must be repaired. disconnect the plug from the power c. source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventi...

Page 6 - maintain a firm grip on the tool with both

Page 6 For technical questions, please call 1-800-444-3353. SKU 94245 to damaged parts, gummy deposits, or a build-up of debris. Lower guard should be retracted 12. manually only for special cuts such as ″plunge cuts″ and ″compound cuts.″ Raise lower guard by retracting handle and as soon as blade e...

Page 7 - Vibration Safety

Page 7 For technical questions, please call 1-800-444-3353. SKU 94245 pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone. • Do not use with power switch locked on. • Properly maintain and inspect to avoid electrical shock. • Any power cor...

Page 8 - SAVe tHeSe; gROUNdINg; Check with a qualified electrician; double Insulated tools: tools with; double insulation system which satisfies; extension Cords; Grounded

Page 8 For technical questions, please call 1-800-444-3353. SKU 94245 To reduce vibration, maintain the tool 7. as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVe tHeSe INStRUCtIONS. gROUNdINg tO pReVeNt eLeCtRIC SHOCK ANd deAtH FROM INCORReCt gROUNdINg WIRe CO...

Page 9 - Symbology; SpeCIFICAtIONS

Page 9 For technical questions, please call 1-800-444-3353. SKU 94245 Make sure the extension cord is properly 7. wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.Protect the extension cords from sharp 8. o...

Page 10 - Functions

Page 10 For technical questions, please call 1-800-444-3353. SKU 94245 UNpACKINg When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. INStRUCtIONS FOR pUttINg INtO USe Read the eNt...

Page 11 - OpeRAtINg INStRUCtIONS; tool Set Up; Spindle Lock Button with one hand.

Page 11 For technical questions, please call 1-800-444-3353. SKU 94245 OpeRAtINg INStRUCtIONS Read the eNtIRe IMpORtANt SAFetY INFORMAtION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set Up tO pReVeNt SeRIOUS INjURY ...

Page 12 - Work piece and Work Area Set Up; a NIOSH-approved respirator and have; general Operating Instructions

Page 12 For technical questions, please call 1-800-444-3353. SKU 94245 Work piece and Work Area Set Up Work piece selection: 1. Work piece must be free of foreign a. objects and loose knots.Do not use to cut logs, tree limbs, or b. uneven lumber.Wet lumber, green (unseasoned) c. lumber, and pressure...

Page 13 - pocket Cuts; When the Base Plate is resting flat on; WARNINg! Never pull the saw

Page 13 For technical questions, please call 1-800-444-3353. SKU 94245 or clamp a straight edge to the material to guide the saw on a straight path. Refer to photo above.Place the saw Base Plate on the material 6. to be cut. Align the front notch (right edge aligns with saw blade) on the cut line.Ho...

Page 14 - Procedures not specifically; Lubrication; replaced only by a qualified service; Replacing the Carbon Brushes

Page 14 For technical questions, please call 1-800-444-3353. SKU 94245 MAINteNANCe ANd SeRVICINg Procedures not specifically explained in this manual must be performed only by a qualified technician. tO pReVeNt SeRIOUS INjURY FROM ACCIdeNtAL OpeRAtION: turn the power Switch of the tool off and unplu...

Page 15 - Symptom; disconnect power supply before service.

Page 15 For technical questions, please call 1-800-444-3353. SKU 94245 pLeASe ReAd tHe FOLLOWINg CAReFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY ...

Page 16 - pARtS LISt; individually as replacement parts.

Page 16 For technical questions, please call 1-800-444-3353. SKU 94245 pARtS LISt part description Q’ty 1 Guide Fence 1 2 Round-head Rivet 2 3 Guide Fence Screw 1 4 Base Plate 1 5 Screw M6x16 1 6 Angle Bracket 1 7 Retaining Ring 1 8 Carriage Bolt M6x10 1 9 Washer 1 10 Wing Nut M6 1 11 Blade Cover 1 ...

Page 17 - ASSeMBLY dIAgRAM

Page 17 For technical questions, please call 1-800-444-3353. SKU 94245 ASSeMBLY dIAgRAM REV 10e

Page 18 - LIMIted 90 dAY WARRANtY; EXPRESSLY IN LIEU OF ALL OTHER

Page 18 For technical questions, please call 1-800-444-3353. SKU 94245 LIMIted 90 dAY WARRANtY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...