Blodgett KTT-E Series - Manual
Blodgett KTT-E Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT NOTES FOR INSTALLATION AND OPERATION; This manual should be retained for future reference.
- Page 4 – SERVICE CONNECTIONS; ELECTRICAL CHARACTERISTICS
- Page 5 – INSTALLATION INSTRUCTIONS; The kettle must be installed in accordance with:
- Page 6 – Ground appliance to terminal provided inside console housing.; WARNING
- Page 7 – the desired setting from 1 to 10.
- Page 8 – OPERATION INSTRUCTIONS; NOTE
- Page 9 – Add water to kettle for cleaning purposes.; TILTING INSTRUCTIONS; Pull out the tilt knob near top right of console.
- Page 10 – CLEANING INSTRUCTIONS; Add water and mild detergent to the kettle immediately after use.; NOT RECOMMENDED
- Page 11 – GENERAL MAINTENANCE; At exterior rear of kettle jacket remove nut from Air Vent.; VENTING INSTRUCTION; With an empty kettle, place power switch to the ON position.
- Page 13 – Clear yellow liquid. Odourless. Avoid temperatures above 450
- Page 17 – TOXICOLOGICAL INFORMATION; (See Section 3 for Potential Health Effects. For; ECOLOGICAL INFORMATION; (For detailed Ecological data, write or call the address or; DISPOSAL CONSIDERATIONS; (See Section 15 for Regulatory Information)
- Page 18 – (Not meant to be all-inclusive – selected regulations
- Page 20 – CANADIAN REGULATIONS; This product is not a “Controlled Product” under WHMIS.; OTHER INFORMATION; MSDS STATUS: Revised to 16 section format.
1
KTT-E Series
ELECTRIC TABLE TOP TILTING KETTLE
INSTALLATION – OPERATION
–
MAINTENANCE
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone (800) 331-5842, (802) 860-3700 Fax: (802) 864-0183
S00063 Rev A (5/04)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followedcarefully. This is the safety alert symbol. It is used to alert you to potentialpersonal injury hazards. Obey all safety messages that follow thissymbol to avoi...
4 SERVICE CONNECTIONS F E SAFETY RELIEF VALVE 4 [102] 10 [254] 12.5 [318] H J 1.25 [32] L K G 14.50 [368] A ID B C D 4X WELD NUTS 5/16-18UNC 18 [457] 2.25 [57] DIMENSIONS ARE IN INCHES [MM] ELECTRICAL CONNECTION TO BE AS SPECIFIED ON DATA PLATE 6 gallons CAPACITY 10 gallons 12 gallons MODEL KTT-10E ...
5 1.0 INSTALLATION INSTRUCTIONS Immediately after unpacking, check for possible shipping damage. If the kettle is found to bedamaged, save the packaging materials and contact the carrier within 15 days of delivery. 1. The kettle must be installed in accordance with: 2. State and/or local codes. 3. I...
