Blodgett BLP-40G - Manual
Blodgett BLP-40G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – COMPANY TO PERFORM MAINTENANCE AND REPAIRS SHOULD THE APPLIANCE; Do not obstruct the flow of combustion and ventilation air.
- Page 4 – SERVICE CONNECTIONS; DIMENSIONS
- Page 6 – Bolt and anchor appliance securely to the floor.
- Page 7 – GAS CONNECTIONS
- Page 9 – DAILY SHUTDOWN PROCEDURE; Turn THERMOSTAT dial to OFF. Close manual gas shutoff valve.
- Page 10 – TILTING THE BRAISING PAN; DO NOT try to tilt braising pan with lid down.
- Page 11 – FIGURE 3
- Page 12 – ADJUSTMENTS; All tilting braising pans are adjusted at the factory.
- Page 13 – COOKING GUIDELINES; estimated; ITEM
- Page 16 – Off Carcass; MISCELLANEOUS; sandwich
- Page 17 – Burners do not come on:; Unit electrical supply is not plugged in or turned on.; Burners produce carbon deposits:
1
BLP-G
GAS FLOOR MODEL BRAISING PAN WITH
ELECTRIC POWER TILT
INSTALLATION – OPERATION – MAINTENANCE
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone (800) 331-5842, (802) 860-3700 Fax: (802) 864-0183
S00069 Rev A (5/04)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions befollowed carefully. This manual should be retained for future reference. This is the safety alert symbol. It is used to alert you to potentialpersonal injury hazards. Ob...
4 1.0 SERVICE CONNECTIONS 1.0 [26] 29.5 [750] 6[152] MINIMUM 23.5 [597] OPTIONAL FAUCET POUR PATH C A 33 [838] 37 [940] H H K H 4.0 [101] 7.0 [178] L M B 19.25 [489] D E F G J REAR FLANGED FOOT DETAIL 4 7/16" [11mm] HOLES ON 3 [76] B.C. EQUALLY SPACED Ø DIMENSIONS ARE IN INCHES [MM] Unless other...
6 FLUE CONNECTIONS Do not obstruct the flow of flue gases from the flue duct located on the rear of the tiltingbraising pan. It is recommended that the flue gases be ventilated to the outside of thebuilding through a ventilation system installed by qualified personnel. Information on the constructio...
