Page 3 - Contents
4 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Contents Quick Reference ........................... 51 RC 08 remote control unit(Option) ......................................... 59 Important notes ............................ 60 What you need to know .......................
Page 5 - Quick Reference
5 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Switching the sound on/off:Press ON briefly. If the sound hasbeen switched off, “Mute” will appearin the display.You can switch on the sound again byturning the volume knob 3 . Switching the unit on/off with theKeyCard:The un...
Page 6 - Switching between the menu levels
5 2 After the beep press ON. The unit willswitch on.After the unit has played for an hour, itwill switch off automatically to preventthe vehicle battery from running down. 3 Adjusting the volumeTurn the knob to adjust the volume. The volume setting will appear in thetop line of the display. When the...
Page 7 - FM
5 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS “TA” will appear when the priority fortraffic information has been activated.Switching priority on/off: Press TA.To interrupt a traffic message: PressSTOP. Stop will only appear in the dis-play during traffic message broad-ca...
Page 9 - Rocker switch
5 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS 5 Top lineIndicates a function of the operatingmode selected, e.g. the radio stationselected during radio operation. You can use DIS to select what is dis-played in the top line. Radio operation EUROPE 1 - radio station nameo...
Page 11 - Display; CDC
5 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS ; Display Radio operation TP, TA - TP = Traffic Program (ra- dio is tuned into a trafficprogram station) - TA = priority for traffic pro- gram stations is active PTY - Program type is active AF - Alternative frequency for RDS...
Page 12 - KeyCard; Eject
5 8 For more information, refer to the sec-tion on “DSC programming, KeyCard,LED on/off”. B KeyCard theft protection systemTo operate this unit, the KeyCard mustbe inserted. KeyCard Inserting the KeyCardPress 1 to unlock the operating pan- el, the operating panel will fold downforward.Slide the KeyC...
Page 13 - Station seek tuning
5 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS RC 08 remote control unit (Option) F <</>>, / Radio operation Station seek tuning updown <</>> down/up in short intervals (for FM only when AF is switchedoff) For FM only:<</>> Pages throug...
Page 14 - Important notes
6 0 AmplifiersAll Blaupunkt amplifiers. Guarantee The scope of the guarantee is determinedby the laws in the country where the unitwas purchased.Regardless of the legal guarantee regula-tions, Blaupunkt affords a 12-month guar-antee. Your cash register receipt is a validguarantee coupon.If you have ...
Page 15 - KeyCard theft protection system; Incorrect KeyCard; Removing the KeyCard; For safety’s sake, the operating
6 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS KeyCard theft protection system Operating the unit for the firsttime To insert the KeyCard, unlock the operatingpanel by • pressing 1 , the operating panel will fold down. • Insert the KeyCard with the contactsfacing down as ...
Page 16 - Displaying the radio pass data; Flashing light as theft protection; Flashing light diode
6 2 Incorrect KeyCard If a wrong KeyCard is inserted, then “WrongKC” will appear in the display. Remove the wrong card and insert the cor-rect KeyCard. Displaying the radio pass data You can use the KeyCard supplied with yourset to display the radio pass data such asthe model name, product number (7...
Page 17 - Switching off the flashing light; Care of your KeyCard; Press ENT after you have entered the
6 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Make sure that the unit is switched off; theoperating panel is unlocked; the KeyCardhas been removed; “LED ON” has been se-lected in the DSC mode (default setting).If necessary, please refer to the section on“DSC programming ...
Page 18 - Setting the clock; First-time installation; Activating the Install menu
6 4 Entering your Owner Identifica-tion Use this function to enter six lines with eightcharacters each as your proof of ownership. To do so• press O-ID, the first entry position will flash in the top line of the display. Use / to select the letters, digits and sym-bols, use << / >> to se...
Page 19 - press NEXT as often as required.; Reset to default settings; Connecting external equipment
6 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Switching the ignition connec-tion on/off Use IGN (ignition) to be able to switch thecar radio on and off with the ON button onlyor with the ignition as well. Switching on/off:• Press IGN, “Ign on” or “Ign off” will ap-pear i...
Page 20 - press ENT and EXIT twice.
6 6 Selecting the operatingmode You can select from among the followingoperating modes: radio (TU), CD and CDC(changer). CD cannot be selected unless a CD is in-serted in the drive. CDC cannot be selected unless one of theBlaupunkt changers, the A 06, the A 072,the A 08, the A 05, or the A 071 has b...
Page 21 - AF - Alternative frequency; Press AF briefly, the red arrow will; Radio operation with RDS (Radio Data System)
6 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS To return to page 1:• press PRE. The unit will switch back to menu level 1automatically 8 sec. after the last key waspressed. Press EXIT to return to menu lev-el 1 immediately. AF - Alternative frequency The AF (Alternative F...
Page 22 - REG - regional program; Selecting a waveband; Press TU to select the desired wave-; Station tuning
6 8 While searching for the strongest receptionsignal, the radio may switch to mute briefly. If “Search” appears in the display when youswitch on the radio or recall one of the storedfrequencies, this indicates that the unit isautomatically searching for an alternativefrequency. “Search” will disapp...
Page 23 - Seek tuning; Press NEXT as often as necessary un-; Storing stations; Press TU, menu level 2 will appear in
6 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Radio operation with RDS (Radio Data System) Seek tuning UpDown << / >> Down/Up in short intervals (for FM only, when “AF” isswitched off) Manual tuning with << / >> You can also tune into a station ma...
Page 24 - Recalling stored stations
7 0 Radio operation with RDS (Radio Data System) “T-Store” will flash in the display. The six strongest FM stations will be auto-matically stored on the memory bank “FMT”(Travelstore). When this process has beencompleted, the radio will play the station withthe strongest reception on station preset ...
Page 25 - Press TU and SCAN briefly.; press TU and NEXT one after the
7 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS To select a scanned station and switchoff Preset Scan:• Press the rocker switch briefly. Scanning stations withRadio Scan You can also scan all of the stations withinreception range. Radio Scan cannot be started unless PTYis ...
Page 26 - Program type; press DIS repeatedly until the PTY
7 2 Interference with strong adjacent stationscan be reduced to an absolute minimum ifyou activate SHARX ON (default setting). If necessary, refer to the section on “DSCprogramming - TUN(er) SHRX”. PTY - Program Type PTY is an RDS service which an increasingnumber of broadcasting stations have be-gu...
Page 27 - Selecting stored program types
7 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Selecting and storing PTY programtypes When PTY is switched on, it is possible todisplay the last PTY selected and the storedprogram types for approx. 8 sec. One pro-gram type is stored on each of the stationpresets 1 to 6 at...
Page 28 - Radio text; Activating radio text
7 4 Radio text This is an RDS function which allows radiostations to transmit texts. The text information is displayed in the topline of the display. Depending on the radio station, these textscan have different contents, e.g. news briefs,program guide, advertising. It is not possible to read radio ...
Page 29 - Warning beep; Switching the warning beep off; Traffic information station reception with RDS-EON
7 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Traffic announcement priorityon/off If the priority for traffic announcement pro-grams is activated, “TA” will light up in thedisplay. To switch the priority on or off:• Press TU to access menu level 2. • Press the TA button....
Page 30 - Recording traffic messages; Altering the TIM standby time
7 6 There will be a brief status message in thetop line of the display: - TIM 2h = TIM is switched on- TIM off = the function has been switched off. If TIM is switched on, any traffic messagesbroadcast by the traffic radio station youhave selected will be recorded for 2 hoursafter the set has been s...
Page 31 - Warning
7 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS During the TIM standby time, apower antenna will remain extend-ed. Please observe the warningnote. Retrieving stored trafficmessages Up to four traffic messages can be record-ed. TIM 1 is always the most recent mes-sage.If th...
Page 32 - Removing a CD; Switching on CD operation; CD operation / CD changer operation; Inserting a CD
7 8 The CD will be transported to its playingposition automatically. CD playback willstart. • Push the operating panel up on theleft-hand side and lock it into position. Removing a CD • Unlock the operating panel and pressthe Eject button (arrow) for approx. 1second. The CD will be ejected. To prote...
Page 33 - Selecting tracks
7 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS • Press the corresponding key to selecta CD. You can also use << / >> on the rockerswitch to select CDs. CD and CD changer operation Selecting tracks You can use the rocker switch to conven-iently select tracks or...
Page 34 - TPM; MIX; Press MIX briefly, the function selected
8 0 TPM (Track-Program-Memory) Use this feature to program and play yourfavourite CD tracks in CD and changer op-eration.Up to 30 CDs can be managed in the CDmode, up to 99 discs in the CDC mode, witha maximum of 40 tracks each. TPM can onlybe used in the mode it was stored in (CD orchanger operatio...
Page 35 - SCAN; Press SCAN once again briefly.; Entering CD names; Press ENT in order to store it.; Press EXIT or DSC to quit the DSC menu.
8 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS SCAN Use this function to scan all of the CD tracks. For CD changer operation, use CDC toswitch the menu levels. To start the Scan function:• Press SCAN briefly. The red arrow will flash to indicate that thefunction is active...
Page 37 - Setting the equaliser; Notes on making the settings; Press ENT to store your settings.
8 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Setting the equaliser The acoustic characteristics of the car inte-rior affect the quality of the sound repro-duced in your vehicle to a much greater ex-tent than the speakers. Position, installation and the rear volumesof, f...
Page 38 - Switching the equaliser on/off
8 4 Switching the equaliser on/off The equaliser can be switched on and off inthe AUD menu, page 2. • Press AUD, NEXT and DPE one afterthe other. “DPE on” or “DPE off” will appear in the dis-play. • Press << to switch the function off or>> to switch it on. The equaliser will switch on au...
Page 39 - Assistance in setting your equaliser; What to do; Frequency range
8 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Assistance in setting your equaliser Start to make your settings in the mid-range/treble and end it with the bass range. What to do Boost the bass withthe “LOW” filterFrequency: 50 to 100 HzLevel: +4 to +6 dB Reduce the lower...
Page 40 - DSC programming
8 6 DSC programming This car audio system has been equippedwith DSC (Direct Software Control) to allowyou to customise certain programmable,basic settings to suit your personal needsand preferences and then store them. The basic settings for this audio equipmentwere made at the factory. In the follo...
Page 41 - / to adjust the display brightness
8 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS PTYUse to select the language used to indicatethe program type: Deutsch, English or Fran-cais. SHARXSwitches the bandwidth in the FM frequen-cy range.When there are a large number of stationswithin your current reception rang...
Page 45 - Specifications; Amplifier; Glossary - Technical Terminology
9 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Specifications Amplifier Output power: 4 x 25 W RMS poweracc. to DIN 45324 at14.4 V4 x 40 W max. power Tuner WavebandsFM : 87.5 – 108 MHz MW : 531 – 1602 kHz LW : 153 – 279 kHz FM sensitivity: 0.7 µ V at 26 dB signal-to-noise...
Page 47 - Index
9 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Index K KeyCard 58, 61, 62, 63 M Memory bank (FM) 69 Menu level 52, 53 MIX 80 Mono 71 Mute 51, 59 O Operating mode 66 Operating panel 51 P Preset Scan 70 Program type 72 PTY 72 R Radio operation with RDS 67 Radio pass data 62...
Page 48 - Bosch Gruppe; Service numbers
Blaupunkt-Werke GmbH Bosch Gruppe 03/99 Pf K7/VKD 8 622 401 872 Service numbers Tel.: Fax: Deutschland 018 050 002 25 051 214 940 02 Belgique 025 255 444 025 255 448 France 014 010 70 07 014 010 73 20 Nederland 023 565 63 48 023 565 63 31 Great Britain 018 958 383 66 018 958 383 94 Danmark 044 898 3...
