Page 3 - WARNING; Support
있습니다. 적절히 접지된 STP (shielded twisted pair) 케이블을 사용하여 제품을 연결 하십시오. Safety This product complies with IEC/EN/UL 60950-1, Safety of InformationTechnology Equipment. If its connecting cables are routed outdoors,the product shall be grounded either through a shielded network cable (STP) or other appropria...
Page 4 - Hazard Levels; DANGER; Other Message Levels
AXIS M7011 Video Encoder Safety Information Safety Information Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates...
Page 5 - Table of Contents
AXIS M7011 Video Encoder Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Message Levels . . . . . . ....
Page 7 - Connectors and Buttons; BNC Connector; Settings > Video termination; Network Connector
AXIS M7011 Video Encoder Hardware Overview Hardware Overview 2 3 4 5 6 1 7 1 LED indicators for status, power, network 2 microSD/microSDHC/microSDXC slot supporting memory card up to 64 GB (card not included) 3 Network connector (PoE) 4 Control button 5 RS-485/RS-422 connector 6 BNC connector 7 Part...
Page 8 - Hardware Overview; SD Card Slot; LED Indicators
AXIS M7011 Video Encoder Hardware Overview RS485/RS422 Connector Two terminal blocks for RS485/RS422 serial interface used to control auxiliary equipment such as PTZ devices. SD Card Slot For SD card recommendations, see www.axis.com Control Button For location of the control button, see Hardware Ov...
Page 9 - Access from a Browser; Access from the Internet
AXIS M7011 Video Encoder Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ®...
Page 10 - Access the Product; Set the Root Password; The Live View Page; Controls on the Live View Page; Manual Trigger
AXIS M7011 Video Encoder Access the Product For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the Root Password To access the Axis product, you must set the password for the default administrator user root . This is done in the Configure Root Passwo...
Page 11 - AXIS Media Control viewer toolbar
AXIS M7011 Video Encoder Access the Product 3. From the Trigger drop-down list, select Input Signal . 4. From the second drop-down list, select Manual Trigger . 5. Select the desired action and configure the other settings as required. For more information about action rules, see Events on page 33 ....
Page 13 - MJPEG
AXIS M7011 Video Encoder Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list ...
Page 14 - Media Streams; Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS M7011 Video Encoder Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Pan...
Page 16 - Setup; Basic Setup
AXIS M7011 Video Encoder Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settin...
Page 17 - Set Up Video Streams; Pixel Counter
AXIS M7011 Video Encoder Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 19 . • Overlay image. See page 20 . • Privacy mask. See page 21 . Set Up Video Streams To set...
Page 18 - Video; Stream Profiles
AXIS M7011 Video Encoder Video • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the cu...
Page 19 - Camera Settings; Image Appearance
AXIS M7011 Video Encoder Video • When setting up recording using action rules. See Events on page 33 . • When setting up continuous recording. See Continuous Recording on page 39 . • In the Live View page – select the stream profile from the Stream profile drop-down list. For quick setup, use one of...
Page 20 - Overlay; Overlay Image
AXIS M7011 Video Encoder Video Overlay Overlays are used to provide extra information, for example for forensic video analysis or during product installation andconfiguration. Overlays are superimposed over the video stream. An overlay text can display the current date and time, or a text string. Wh...
Page 21 - Privacy Mask
AXIS M7011 Video Encoder Video - To scale the image automatically, select Scale with resolution . The image will be scaled down to fit the resolution used by the Axis product. 5. Click Save . To select the image to use as overlay: 1. Go to Video > Overlay Image . 2. Select the image to use from t...
Page 23 - Default Viewer for Browsers
AXIS M7011 Video Encoder Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Browser. See page...
Page 24 - Configure the Live View Page; Enable recording button; User Defined Links; Show custom link
AXIS M7011 Video Encoder Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC) on page 13...
Page 25 - Access the Preset Positions; Set the Home Position; Guard Tour
AXIS M7011 Video Encoder PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if a PTZ driver has been uploaded. See Install PTZ Driver on page 27 . Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position ...
Page 26 - Advanced; Device Settings
AXIS M7011 Video Encoder PTZ (Pan Tilt Zoom) 1. Go to PTZ > Guard Tour and click Add . 2. Enter a descriptive name. 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the Move Speed . 6. Specify the View Time in seconds or minutes. 7. Spe...
Page 27 - OSD Menu; Install PTZ Driver
AXIS M7011 Video Encoder PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move topreset positions that require a tilt movement. OSD Menu If the PTZ unit supports an internal configuration menu, this ...
Page 28 - Camera Tampering; Motion Detection
AXIS M7011 Video Encoder Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, spray-painted or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering det...
Page 29 - Detectors; Set Up Motion Detection Windows; Motion Detection Parameters
AXIS M7011 Video Encoder Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion ...
Page 31 - Application Licenses
AXIS M7011 Video Encoder Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For in...
Page 32 - Applications
AXIS M7011 Video Encoder Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factorydefault, see Reset to Factory Default Settings . 32
Page 33 - Set Up Action Rules; Triggers
AXIS M7011 Video Encoder Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whenthe actio...
Page 34 - Events; Actions
AXIS M7011 Video Encoder Events - Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications. - Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 28 . - Tampering – T...
Page 35 - Add Recipients; Recipient Types
AXIS M7011 Video Encoder Events - Preset Position – Go to a preset position. - Guard Tour – Start a guard tour. See Guard Tour on page 25 . • Record Video – Record video to a selected storage. • Send Images – Send images to a recipient. • Send Notification – Send a notification message to a recipien...
Page 36 - Set Up Email Recipients; Create Schedules
AXIS M7011 Video Encoder Events HTTP Send Images Send Notification Send Video Clip HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and validatethe server’s certificate. If ther...
Page 37 - Set Up Recurrences
AXIS M7011 Video Encoder Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To set up a ...
Page 38 - Find Recordings
AXIS M7011 Video Encoder Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 39 . • To set up action rules, see page 33 . • To access recordings, see Find Recordings on page 38 . • To play r...
Page 39 - Recordings; Export Video Clip; Continuous Recording
AXIS M7011 Video Encoder Recordings 2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the filters. See also Find Recordings on page 38 . 3. Select the recording and click Play . The recording will be played in a new browser ...
Page 40 - Upload Language; Restore
AXIS M7011 Video Encoder Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file ...
Page 41 - Security; Users
AXIS M7011 Video Encoder System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymou...
Page 42 - System Options; Certificates
AXIS M7011 Video Encoder System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. To...
Page 43 - Network; Basic TCP/IP Settings
AXIS M7011 Video Encoder System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: 1. Go to Setup...
Page 44 - IPv4 Address Configuration; Enable ARP/Ping setting of IP address
AXIS M7011 Video Encoder System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings areconfigured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Configu...
Page 45 - AXIS Internet Dynamic DNS Service; Advanced TCP/IP Settings; DNS Configuration
AXIS M7011 Video Encoder System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the document Assign an IP...
Page 46 - NTP Configuration
AXIS M7011 Video Encoder System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP...
Page 47 - Use manually selected NAT router -; SOCKS
AXIS M7011 Video Encoder System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router i...
Page 48 - UPnP; Bonjour
AXIS M7011 Video Encoder System Options Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message. Note If...
Page 49 - SD Card; Mount and Unmount SD Card
AXIS M7011 Video Encoder System Options Storage SD Card NO NO NOTICE TICE TICE To prevent data corruption, the SD card should be unmounted before removal. Note For SD card recommendations see www.axis.com The Axis product supports microSD/microSDHC/microSDXC cards. The following SD card file systems...
Page 50 - Network Share
AXIS M7011 Video Encoder System Options To enable automatic formatting, follow these steps: 1. Open the Axis product’s webpages and go to Setup > System Options > Storage . 2. Click SD Card . 3. Under General Settings , select Autoformat to . 4. Click OK to save settings. An SD card inserted i...
Page 51 - Maintenance; Support Overview; System Overview
AXIS M7011 Video Encoder System Options • Generic TCP/IP allows the Axis product to receive data and send commands via TCP/IP. Select the desired Port Type from the drop-down list. For more information, see the online help . Maintenance The Axis product provides several maintenance functions. These ...
Page 52 - Include snapshot with default image settings; Scripting; File Upload
AXIS M7011 Video Encoder System Options Access Log - Lists all failed attempts to access the product. The Access Log can also be configured to list all connections to the product (see below). Server Report - Provides information about the product status in a pop-up window. The Access Log is automati...
Page 54 - Check the Firmware; Emergency Recovery Procedure
AXIS M7011 Video Encoder Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correction ...
Page 55 - Troubleshooting; Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address; The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS M7011 Video Encoder Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting the...
Page 57 - Motion Detection triggers unexpectedly
AXIS M7011 Video Encoder Troubleshooting Motion Detection triggers unexpectedly Changes in luminance Motion detection is based on changes in luminance in the image. This means that if there aresudden changes in the lighting, motion detection may trigger mistakenly. Lower the sensitivitysetting to av...
Page 59 - Technical Specifications; Approvals; Connectors; TX; Function; Performance Considerations
AXIS M7011 Video Encoder Technical Specifications Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2,FCC Part 15 Subpart B Class A+B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B,KN24, IEC/EN/UL 60950-1, CE, RoHS, WEEE, RE...
