Page 3 - WARNING; Support
Korea 이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사 용자는 이 점을 주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다. 적절히 접지된 STP (shieldedtwisted pair) 케이블을 사용하여 제품을 연결 하십시오. Safety This product complies with IEC/EN 60950-1, Safety of InformationTechnology Equipment. If its connecting cables are routed outdoors,the product shall...
Page 4 - AXIS M5014 PTZ Dome Network Camera; Safety Information; Hazard Levels; DANGER; Other Message Levels
AXIS M5014 PTZ Dome Network Camera Safety Information Safety Information Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION...
Page 5 - Table of Contents
AXIS M5014 PTZ Dome Network Camera Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Message Levels . ....
Page 7 - Hardware Overview; MEM; Connectors and Buttons; Network Connector
AXIS M5014 PTZ Dome Network Camera Hardware Overview Hardware Overview MEM ORY CAR D 1 2 4 3 5 6 1 Control button 2 SD card (microSDHC) slot 3 Part number (P/N) & Serial number (S/N) 4 Network connector (PoE) 5 Status LED indicator 6 Microphone (not applicable for -V-models) Connectors and Butto...
Page 8 - SD Card Slot; Unmount; Control Button; LED Indicators; Status LED
AXIS M5014 PTZ Dome Network Camera Hardware Overview NO NO NOTICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shallbe intended for their specific use. Make sure that the network devices are installed in accordance wi...
Page 9 - Access the Product; Access from a Browser; Access from the Internet
AXIS M5014 PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® w...
Page 10 - Set the Root Password; Set Power Line Frequency
AXIS M5014 PTZ Dome Network Camera Access the Product For more information, see NAT traversal (port mapping) for IPv4 on page 43 . See also AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the Ro...
Page 11 - Controls on the Live View Page; Manual Trigger; AXIS Media Control viewer toolbar
AXIS M5014 PTZ Dome Network Camera Access the Product Controls on the Live View Page Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 18 . The Manual Trigger button is used to trigger an action rul...
Page 12 - AMC Audio Controls; PTZ Controls; PTZ Control Queue; Pan and Tilt bars
AXIS M5014 PTZ Dome Network Camera Access the Product AMC Audio Controls AMC audio buttons control the speakers connected to the client computer. The buttons are only visible when audio is enabled. Speaker button — Click to turn the speakers on or off. Use the slider to control the volume of the spe...
Page 13 - Media Streams; MJPEG
AXIS M5014 PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network willdetermine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video strea...
Page 14 - Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS M5014 PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’sManual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open...
Page 15 - Access Audio Streams; VAPIX® Application Programming Interface (API); Java applet
AXIS M5014 PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guara...
Page 16 - Set Up the Product; Setup; Basic Setup
AXIS M5014 PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to ...
Page 17 - Video and Audio; Set Up Video Streams; Pixel Counter
AXIS M5014 PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure the following: • Video stream settings. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 19 . • Audio settings....
Page 18 - Stream Profiles
AXIS M5014 PTZ Dome Network Camera Video and Audio H.264 H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a compl...
Page 19 - Camera Settings; Image Appearance; Overlay
AXIS M5014 PTZ Dome Network Camera Video and Audio Camera Settings The Video & Audio > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance To change Image Appearance go to the menus under Setup > Video & Audio > Camera Settings . In...
Page 20 - Displaying the Pan Position as a Text Overlay; Set Up Audio
AXIS M5014 PTZ Dome Network Camera Video and Audio 3. To include a text string, select Include text and enter the text in the field. Modifiers can be used, see File Naming & Date/Time Formats in the online help . 4. Define text overlay characteristics in the relevant fields. 5. Click Save . To m...
Page 21 - Audio Input
AXIS M5014 PTZ Dome Network Camera Video and Audio Each stream profile is a separate video stream. To include the audio stream in all stream profiles, go to the audio tab in each streamprofile settings page and enable audio. For more information, see Stream Profiles on page 18 . Audio Input Note Whe...
Page 22 - Configure the Live View Page; Default Viewer for Browsers
AXIS M5014 PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Browser...
Page 23 - User Defined Links; Show custom link
AXIS M5014 PTZ Dome Network Camera Configure the Live View Page User Defined Links To display user-defined links in the Live View page, select the Show custom link option, give the link a name and then enter the URL to link to. When defining a web link do not remove the 'http://' from the URL addres...
Page 24 - Access the Preset Positions; Set the Home Position; OSDI Zones
AXIS M5014 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists ofthe following values: • Pan and tilt positions • Zoom position Access the Pr...
Page 25 - Advanced; Limits; Control Queue
AXIS M5014 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Advanced Limits Define the pan, tilt, zoom and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted tonarrow the area under surveillance. See the online help for more information. Controls Advanced P...
Page 26 - Detectors; Motion Detection; Set Up Motion Detection Windows; Motion Detection Parameters
AXIS M5014 PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view. Motion detection is configured by defining up to 10 Include and Exclude windows: • Include windows — define areas where motion s...
Page 27 - Audio Detection
AXIS M5014 PTZ Dome Network Camera Detectors High level (100%) Only very large objects triggermotion detection. An object that appears inthe window triggers motiondetection for a long timebefore it is considered asnon-moving. Ordinary colored objects onordinary backgrounds triggermotion detection. M...
Page 28 - Applications; Application Licenses
AXIS M5014 PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counti...
Page 30 - Events; Convert Event Types to Action Rules; Set Up Action Rules
AXIS M5014 PTZ Dome Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whe...
Page 31 - Triggers
AXIS M5014 PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 28 . • Detectors - Audio Detection – Trigger the rule when a...
Page 32 - Actions; Add Recipients; Recipient Types
AXIS M5014 PTZ Dome Network Camera Events - Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 33 . Actions Available actions include: • Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 20 . • PTZ Control - Preset Po...
Page 33 - Set Up Email Recipients; Create Schedules
AXIS M5014 PTZ Dome Network Camera Events HTTP Send Images Send Notification Send Video Clip HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and validatethe server’s certificat...
Page 34 - Set Up Recurrences
AXIS M5014 PTZ Dome Network Camera Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To...
Page 35 - Recordings; Recording List
AXIS M5014 PTZ Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 35 . • To set up action rules, see page 30 . • To access recordings, see Recording List on page 35 . • ...
Page 36 - Save
AXIS M5014 PTZ Dome Network Camera Recordings 5. Click Save to save and start the recording. 36
Page 37 - Languages; Upload Language; Restore
AXIS M5014 PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate...
Page 38 - System Options; Security; Users
AXIS M5014 PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allo...
Page 39 - Certificates
AXIS M5014 PTZ Dome Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the se...
Page 40 - Audio Support
AXIS M5014 PTZ Dome Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: 1. G...
Page 41 - Network; Basic TCP/IP Settings; IPv4 Address Configuration; Enable ARP/Ping setting of IP address
AXIS M5014 PTZ Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled. IPv4 Address Configuration By default, the Axis product is set to use ...
Page 42 - AXIS Internet Dynamic DNS Service; Advanced TCP/IP Settings; DNS Configuration
AXIS M5014 PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart ...
Page 43 - NTP Configuration
AXIS M5014 PTZ Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name i...
Page 44 - Use manually selected NAT router -; SOCKS
AXIS M5014 PTZ Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router. The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband router, Br...
Page 45 - SNMP; UPnP; Bonjour
AXIS M5014 PTZ Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is thegroup of devices and management station running SNMP. Community names are used to identify groups. To enable and configure SNMP in...
Page 46 - SD Card; Mount and Unmount SD Card
AXIS M5014 PTZ Dome Network Camera System Options Storage SD Card NO NO NOTICE TICE TICE To prevent data corruption, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www.axis.com Supports microSD cards with up to 64 GB of storage. For best recording p...
Page 47 - Network Share; Maintenance
AXIS M5014 PTZ Dome Network Camera System Options 1. Insert the SD card in the SD card slot. 2. Open the Axis product’s webpages and go to Setup > System Options > Storage . 3. Click SD Card . 4. Click Format and select the desired file system. 5. Click OK to start formatting the card. Network...
Page 48 - Support Overview; System Overview
AXIS M5014 PTZ Dome Network Camera System Options • the IEEE 802.1X settings • uploaded applications are kept but must be restarted Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be rese...
Page 49 - Scripting; File Upload
AXIS M5014 PTZ Dome Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NOTICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use th...
Page 50 - Troubleshooting; Check the Firmware
AXIS M5014 PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a c...
Page 51 - Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address; The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS M5014 PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems s...
Page 54 - Technical Specifications
AXIS M5014 PTZ Dome Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Models AXIS M5014 Image sensor 1/4'‘ progressive scan RGB CMOS Lens 3.6 mm, F1.8Horizontal angle of view: 60°Vertical angle of view: 32°Diagonal angle of view: 71° Minimumilluminat...
Page 56 - Item; Performance Considerations
AXIS M5014 PTZ Dome Network Camera Technical Specifications Function/group Item Specifications Videomanagementsoftware AXIS Camera Companion (included), AXIS Camera Station and video managementsoftware from Axis’ Application Development Partners (not included). For moreinformation, see www.axis.com/...
