Page 3 - WARNING; Support
Safety This product complies with IEC/EN/UL 60950-1, Safety of InformationTechnology Equipment. If its connecting cables are routed outdoors,the product shall be grounded either through a shielded network cable(STP) or other appropriate method.The power supply used with this product shall fulfill th...
Page 4 - AXIS M3005-V Network Camera; Safety Information; Hazard Levels; DANGER; Other Message Levels
AXIS M3005-V Network Camera Safety Information Safety Information Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indica...
Page 5 - Table of Contents
AXIS M3005-V Network Camera Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Message Levels . . . . . ...
Page 7 - Hardware Overview; Connectors and Buttons; Control Button; LED Indicators; Status LED
AXIS M3005-V Network Camera Hardware Overview Hardware Overview 2 3 4 5 6 1 1 Status LED 2 Dome cover 3 Control button 4 microSD card slot 5 Network connector (PoE) 6 Focus ring Connectors and Buttons For technical specifications, see page 54 . Control Button For location of the control button, see ...
Page 9 - Access the Product; Access from a Browser; Access from the Internet
AXIS M3005-V Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS ...
Page 10 - Set the Root Password; Set Power Line Frequency; Controls on the Live View Page
AXIS M3005-V Network Camera Access the Product For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the Root Password To access the Axis product, you must set the password for the default administrator user root . This is done in the Configure Root Pas...
Page 11 - Manual Trigger; AXIS Media Control viewer toolbar
AXIS M3005-V Network Camera Access the Product The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger on page 11 . Click Snapshot to save a snapshot of the video image. This button is prima...
Page 12 - Emulate joystick mode; Pan and Tilt bars
AXIS M3005-V Network Camera Access the Product Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer. Click the Center mode button and click in the image to center the camera view on that position. The center mode button could als...
Page 13 - Media Streams; MJPEG
AXIS M3005-V Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the li...
Page 14 - Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS M3005-V Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control ...
Page 16 - Set Up the Product; Setup; Basic Setup
AXIS M3005-V Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all set...
Page 17 - Video; Set Up Video Streams; Pixel Counter
AXIS M3005-V Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 18 . • View area. See page 19 . • Overlay image. See page 19 . • Privacy mask. See page 21...
Page 18 - Stream Profiles; Camera Settings; Image Appearance
AXIS M3005-V Network Camera Video H.264 H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas...
Page 19 - White Balance; View Area
AXIS M3005-V Network Camera Video The image Brightness can be adjusted in the range 0–100, where a higher value produces a brighter image. Increasing the Sharpness can increase bandwidth usage. A sharper image might increase image noise especially in low light conditions. A lower setting reduces ima...
Page 20 - Overlay Image
AXIS M3005-V Network Camera Video An overlay text can display the current date and time, or a text string. When using a text string, modifiers can be used to displayinformation such as the current bit rate or the current frame rate. For information about available modifiers, see File Naming & Da...
Page 21 - Use Overlay Text in an Action Rule; Privacy Mask
AXIS M3005-V Network Camera Video 1. Go to Video > Overlay Image . 2. Select the image to use from the Use overlay image list and click Save . To display the overlay image: 1. Go to Video > Video Stream and select the Image tab. 2. Under Overlay Settings , select Include overlay image at the c...
Page 23 - Configure the Live View Page; Default Viewer for Browsers
AXIS M3005-V Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Browser. See p...
Page 24 - Enable recording button; User Defined Links; Show custom link
AXIS M3005-V Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC) on page...
Page 25 - Access the Preset Positions; Set the Home Position; Advanced; Controls
AXIS M3005-V Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas,see View Area on page 19 . Preset Positions A preset position is a saved view that can be used to...
Page 26 - Enable/Disable controls
AXIS M3005-V Network Camera PTZ (Pan Tilt Zoom) • Tilt control • Zoom control To disable specific controls, deselect the options under Enable/Disable controls . 26
Page 27 - Detectors; Camera Tampering; Motion Detection
AXIS M3005-V Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go...
Page 28 - Set Up Motion Detection Windows; Motion Detection Parameters
AXIS M3005-V Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Moti...
Page 30 - Applications; Application Licenses
AXIS M3005-V Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For...
Page 32 - Events; Convert Event Types to Action Rules; Set Up Action Rules
AXIS M3005-V Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whenthe ac...
Page 33 - Triggers
AXIS M3005-V Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 30 . • Detectors - Motion Detection – Trigger the rule when motion ...
Page 34 - Add Recipients; Recipient Types; Set Up Email Recipients
AXIS M3005-V Network Camera Events • Record Video – Record video to a selected storage. • Send Images – Send images to a recipient. • Send Notification – Send a notification message to a recipient. • Status LED – Flash the LED indicator. This can for example be used to validate triggers such as moti...
Page 35 - Create Schedules
AXIS M3005-V Network Camera Events To set up an email recipient using one of the listed providers: 1. Go to Events > Recipients and click Add . 2. Enter a Name and select Email from the Type list. 3. Enter the email addresses to send emails to in the To field. Use commas to separate multiple addr...
Page 36 - Recordings; Recording List
AXIS M3005-V Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 36 . • To set up action rules, see page 32 . • To access recordings, see Recording List on page 36 . • To conf...
Page 37 - Languages; Upload Language; Restore
AXIS M3005-V Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the fi...
Page 38 - System Options; Security; Users
AXIS M3005-V Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anony...
Page 39 - Certificates
AXIS M3005-V Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings....
Page 40 - Network; Basic TCP/IP Settings
AXIS M3005-V Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: 1. Go to Se...
Page 41 - IPv4 Address Configuration; Enable ARP/Ping setting of IP address
AXIS M3005-V Network Camera System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings areconfigured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Conf...
Page 42 - AXIS Internet Dynamic DNS Service; Advanced TCP/IP Settings; DNS Configuration
AXIS M3005-V Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the document Assign an...
Page 43 - NTP Configuration
AXIS M3005-V Network Camera System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain NTP server address via DHCP to use the ...
Page 44 - FTP; SOCKS
AXIS M3005-V Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one route...
Page 45 - Enable traps; UPnP; Always Multicast Video; Bonjour; SD Card
AXIS M3005-V Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap m...
Page 46 - Mount and Unmount SD Card
AXIS M3005-V Network Camera System Options The Axis product supports microSD/microSDHC/microSDXC cards. The following SD card file systems are supported: • ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the...
Page 47 - Network Share; Maintenance
AXIS M3005-V Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated forrecordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www...
Page 48 - Support Overview; System Options > Support > Support Overview; System Overview; System Options > Support > System Overview; Scripting
AXIS M3005-V Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 50 . System Overview To get an ove...
Page 49 - File Upload
AXIS M3005-V Network Camera System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, goto System Options > Advanced > File Upload . Uploaded files are accessed through http://<ip address>/local/&...
Page 50 - Troubleshooting; Check the Firmware
AXIS M3005-V Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correcti...
Page 51 - Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address; The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS M3005-V Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting ...
Page 53 - Storage and disk management problems
AXIS M3005-V Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System Log under ...
Page 54 - Technical Specifications
AXIS M3005-V Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Model AXIS M3005–V Image sensor 1/2.7” progressive scan RGB CMOS Lens M12 mount, fixed iris, megapixel resolution2.8 mm, 118° horizontal angle of view, F2.8Vertical angle of view: 65° Lig...
Page 56 - Performance Considerations
AXIS M3005-V Network Camera Technical Specifications Function/group Item Specifications Casing IP42 water- and dust-resistant, IK08 impact-resistant polycarbonate/ABS casingColor: White NCS S 1002-BFor repainting instructions, contact your Axis partnerPolycarbonate/ABS inner camera module with encap...
