Axis M3007-PV - Manual

AXIS M3007–PV Hardware Overview NOTICE NOTICE NOTICE The product shall be connected using a shielded network cable (STP) or an optical fiber cable. All cables connecting theproduct to the network shall be intended for their specific use. Make sure that the network devices are installed inaccordance ...

AXIS M3007–PV Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari with Macintosh and Fi...

AXIS M3007–PV Accessing the Product Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 50 ) or by resetting the product to factory default. Select the power line frequency (50 Hz or 60 Hz) used at the l...

AXIS M3007–PV Accessing the Product AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 11 for more information. The toolbar displays the following buttons: The Play button connects to the Axis product ...

AXIS M3007–PV Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of availabl...

AXIS M3007–PV Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: • ...

AXIS M3007–PV Setting Up the Product Setting Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings....

AXIS M3007–PV Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 15 . • Stream profiles. See page 20 . • Camera settings. See page 20 . • View areas. See page 21 • Overlay image. See page 22 . • Privacy mask. See page 23 . Video Stream...

AXIS M3007–PV Video • Video > Video Stream . Under Preview , click Open and select the Show pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter the number of pixels in the Width and Height fields and click Apply . • The Live View pag...

AXIS M3007–PV Video This view is only available if the product has been configured for multiple view modes (see ). Double Panorama In this view there are two 180 degree panoramic views. To define the settings for this view go to Setup > Video > Video Stream > Double Pan... . See Video Strea...

AXIS M3007–PV Video Image The default image settings can be configured under Video> Video Stream . Select the Image tab. The following settings are available: • Resolution . Select the default resolution. • Compression . The compression level affects the image quality, bandwidth and file size of ...

AXIS M3007–PV Video size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,the maximum frame size should be set to an optimal value. Stream Profiles A stream profile is a set of predefined stream settings including resolution, co...

AXIS M3007–PV Video Exposure Settings Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidthconsiderations. Exposure value - Click in the bar to fine-tune the exposure. Exposure control - These settings is used to adapt to the amount ...

AXIS M3007–PV Video To define the video stream settings for each view area click on the respective view area from Setup > Video > Video Stream . See page 15 . You can select a view area that you have set up from the Source drop-down list in the Live View page. Use the Pan , Tilt , Zoom sliders...

AXIS M3007–PV Video For information about supported image formats, see the online help . Using Overlay Text in an Action Rule Action rules, see page 33 , can display an overlay text when the rule is triggered. The text can be used to provide information for forensic video analysis, notify surveillan...

AXIS M3007–PV Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 20 . • Default Viewer for Browser. See page 24 . • Viewer Settings. See page 2...

AXIS M3007–PV Live View Config Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of thefollowing installed on the client: • JVM (J2SE) 1.4.2 or higher.• JRE (J2SE) 5...

AXIS M3007–PV PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) PTZ controls are only available for view areas. Preset Positions A preset position is a predefined view that can be used to quickly steer the camera to a specific location. Preset positions canbe accessed in several ways: • By selecting the prese...

AXIS M3007–PV PTZ (Pan Tilt Zoom) Guard Tour A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and forconfigurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser. To ad...

AXIS M3007–PV Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go to Detectors ...

AXIS M3007–PV Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection W...

AXIS M3007–PV Detectors Medium level (50%) A large difference in luminanceis required to trigger motiondetection. Low level (0%) Even very small objects triggermotion detection. An object that appears inthe window triggers motiondetection only for a very shorttime before it is considered asnon-movin...

AXIS M3007–PV Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For informationab...

AXIS M3007–PV Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factorydefault, see Reset to Factory Default Settings . 32

AXIS M3007–PV Events • Send Images – Send images to a recipient. • Send Notifications – Send a notification message to a recipient. • Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration. Settin...

AXIS M3007–PV Events Recipient Use with action Email 1 Send Images Send Notification FTP Send Images HTTP Send Images Send Notification Network Share 2 Send Images TCP Send Notification 1. Some email providers have security filters that prevent users from receiving or viewing large amount of attachm...

AXIS M3007–PV Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 37 . • To set up action rules, see page 34 . • To access recordings, see Recording List, on page 37 . • To configure camera ...

AXIS M3007–PV Recordings 5. Click Save to save and start the recording. 38

AXIS M3007–PV Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file and click t...

AXIS M3007–PV System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer lo...

AXIS M3007–PV System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless networkdevices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices mu...

AXIS M3007–PV System Options If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 44 . • Set manually – Allows you to manually set date and time. If using an NTP server, select your Time zone from the drop-down list. If required, check Automaticall...

AXIS M3007–PV System Options Linux/Unix syntax arp -s <IP address> <serial number> tempping -s 408 <IP address> Linux/Unix example arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125 Windows syntax (this may require that you run the command prompt as an administrat...

AXIS M3007–PV System Options Advanced TCP/IP Settings DNS Configuration DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain DNS server address via DHCP to use the...

AXIS M3007–PV System Options NAT traversal (port mapping) for IPv4 A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwardingnetwork traffic from the private network to the “outside”, that is, the Internet. Security on the priv...

AXIS M3007–PV System Options QoS (Quality of Service) QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware networkprioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an appl...

AXIS M3007–PV System Options Bonjour The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operatingsystems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour . Storage SD ...

AXIS M3007–PV System Options To add a network share: 1. Go to System Options > Storage . 2. Click Network Share . 3. Enter the IP address, DNS or Bonjour name to the host server in the Host field. 4. Enter the name of the share in the Share field. Sub folders cannot be used. 5. If required, selec...

AXIS M3007–PV System Options See also Troubleshooting, on page 51 . System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview . Information that can be found here includes firmware version, IP address, network and security se...

AXIS M3007–PV System Options Plain Config Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified fromthis page. To open Plain Config, go to System Options > Advanced > Plain Config . Axis Support does not provide assistance. Re...

AXIS M3007–PV Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correction that fix...

AXIS M3007–PV Troubleshooting Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Statusindicator indicates a failed upgrade. To recover the product, follow the steps below. The serial number is ...

AXIS M3007–PV Troubleshooting The IP address has beenchanged by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address hasbeen changed, use AXIS IP Utility or AXIS Camera Management to locate the product on thenetwork. Identify the product using its model or seri...

AXIS M3007–PV Technical Specifications Function/group Item Specifications Video access fromweb browser Camera live viewVideo recording to file (ASF)Customizable HTML pagesWindows Vista, XP, Windows 7, Server 2003 and Server 2008DirectX 9c or higherFor other operating systems and browers see www.axis...