Audiovox AS 9076C - Manual
Audiovox AS 9076C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – REMOTE STARTING THE VEHICLE; The Gear Selector Is In Any Gear Other Then Park.
- Page 3 – OPERATING ON AUTOMATIC START UP TIMER MODE
- Page 4 – FUNCTION SETTING CHART; To be completed by installer; TO BEGIN THE AUTOMATIC START UP TIMER
128-8780
1 of 4
Page 1
Model AS 9076C
Owner’s Manual
Remote Start
Upgrade Module
FEATURES :
♦
Remote Start Safety Control Switch
♦
Selectable Automatic Timed Start Mode (2 Or 4 Hours Selectable intervals)
♦
On-Board Start Relay
♦
On-Board Accessory Relay
♦
On-Board Ignition 1 Relay
♦
On-Board Ignition 2 Relay
♦
Ignition 2 Relay Selectable On or Off During Cranking
♦
On-Board Parking Light Relay
♦
Ignition 3 / Shock By-Pass / GM VAT Output (relay required)
♦
Tach Signal Learning Circuitry
♦
Two ( + ) and Two ( - ) Safety Shutdown Circuits
♦
Alarm By-Pass Outputs
♦
Selectable Steady or Flashing Parking Lights for Run Indication
♦
Selectable 10 or 15 Minute Run Time
♦
Factory Keyless Upgrade Inputs (Allows Starting From Factory Keyless Entry
Unit)
♦
4 Auxiliary Outputs To Allow Control Of A Factory Alarm
♦
Diesel Glow Plug Preheat Mode select
WARNING!
Be certain that the vehicle is outdoors before using this or any re-
mote vehicle starting device. A running engine produces dangerous
carbon monoxide fumes which can be harmful or fatal if prolonged
exposure occurs. DO NOT remote start the vehicle if the car is ga-
raged.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
128-8780 2 of 4 Page 2 This Remote Start Upgrade unit is designed to be added to an existing remotecontrol keyless entry system, or remote alarm system. Because it is an upgrade unit it can be wired to operate from any unused button(s)from your keychain transmitter. Please check with your installing...
128-8780 3 of 4 Page 3 To Remote Start The Vehicle: Press and release the proper button or combination of buttons on your keychaintransmitter to activate the remote start system, typically Lock, Unlock, Lock insequence. The vehicle will start and remain running for the pre-programmedtime up to 60 mi...
128-8780 4 of 4 Page 4 FUNCTION SETTING CHART To be completed by installer Lights Steady Pulse Run Time ___ Min. TO BEGIN THE AUTOMATIC START UP TIMER 1. Turn the ignition key on then off. 2. Within 10 seconds, activate the RF start command two times. The parking lights will flash 4 times indi...
