Audiovox AS 9075a - Manual

Audiovox AS 9075a

Audiovox AS 9075a – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 3 – SEE NEUTRAL START SAFETY TEST FOR FURTHER DETAILS.
  • Page 4 – WIRING CONNECTIONS: 12 Pin Input / Output Harness; BLACK w/WHITE Tracer Wire: Control Switch; WIRING THE 6-PIN MAIN POWER HARNESS
  • Page 5 – Brake Switch Positive Shutdown Detail; PRESENTLY CONNECTED TO IN THE VEHICLE.
  • Page 6 – LIGHT BLUE Wire: Ignition 3 / Shock Disable Output; key's value from the resistor pack supplied.
  • Page 7 – General Motors VATS By-Pass Diagram; DARK GREEN/ORANGE Wire: Tach Sensor Input
  • Page 8 – Tachometer Input Wiring Detail
  • Page 10 – TIMED START OPERATION:
  • Page 12 – the ignition switch off. DO NOT attempt to remove the key.
  • Page 14 – METHOD 1; To connect to the key in sensor as shown in method 1:
  • Page 15 – COMPLETING THE INSTALLATION:; METHOD 2
Loading the manual

128-6602

1 of 16

Model AS 9075a

Installation Manual

Remote Start Upgrade Module

Installation Instructions

This Unit Is Intended For Installation In Vehicles With

12 Volt Negative Ground Electrical Systems,

Gasoline or Diesel With True Tach Reference

And Automatic Transmissions Only.

Kit Contents

(1) -Control Module
(1) - Multi Pin Input/Output Harness
(1) - Six Pin Power Harness
(1) - Four Pin Auxiliary Harness
(1) - Three Pin I/O Harness
(2) - 30 Amp In-line Fuse Holders With Fuses
(1) - Control Switch / Programming Switch
(1) - Ring Terminal
(4) - 1/2" Long Screws
(1) - Pin Switch
(1) - Remote Start Warning Label
(1) - Literature Package

1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - SEE NEUTRAL START SAFETY TEST FOR FURTHER DETAILS.

128-6602 3 of 16 Remote Start Connection WIRING THE 6 PIN MAIN POWER HARNESS:RED w/ WHITE Trace Wire: + 12 volts Battery 1 SourceConnect this wire to a + 12 VDC constant source found at the vehicle's ignition switch using the 30 Amp fuseand holder provided. This wire provides power for the control c...

Page 4 - WIRING CONNECTIONS: 12 Pin Input / Output Harness; BLACK w/WHITE Tracer Wire: Control Switch; WIRING THE 6-PIN MAIN POWER HARNESS

128-6602 4 of 16 BLUE Wire: Ignition 1 OutputConnect this wire to the ignition 1 wire from the ignition switch. This wire will show +12 volts when the ignitionkey is turned to the to the "ON" or "RUN" and the "START" or CRANK" positions, and will have 0 volts whenthe key ...

Page 5 - Brake Switch Positive Shutdown Detail; PRESENTLY CONNECTED TO IN THE VEHICLE.

128-6602 5 of 16 the Black w/ White wire is at open circuit through the control switch, the remote starter is disabled.Connect the Black w/ White tracer wire to one of the wires from the back of the previously mounted control switch.Connect the remaining wire of the control switch to chassis ground....

Other Audiovox Models