Audiovox APS 996 - Manual
Audiovox APS 996 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – THIS PAGE INTENTIONALLY LEFT BLANK
- Page 3 – INSTALLATION OF THE MAJOR COMPONENTS:
- Page 6 – YELLOW START WIRE DETAIL
- Page 8 – Siren Wiring Detail; SIREN; Positive Door Switch Wiring Detail
- Page 9 – General Motors VATS By-Pass Diagram
- Page 13 – Channel 3 Relay Wiring Detail
- Page 14 – some remote start trigger inputs, will damage the control module.; Green/Yellow Wire: DIESEL WAIT TO START INPUT; when the transmitter is used to alm/lock the system.; Black w/ Red Trace Wire: Pulsed Ground Output After Shutdown
- Page 18 – ALARM SELECTABLE FEATURES
- Page 19 – REMOTE START SELECTABLE FEATURES; verifying you are in the feature program mode.
- Page 23 – METHOD 1
- Page 24 – METHOD 2
- Page 25 – COMPLETING THE INSTALLATION:; Make sure to clean the surface before affixing the label.
Model APS 996
Installation Manual
SELECTABLE FEATURES
Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be
certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
RF Programmable Features :
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
Default
1st DoorL/UL
1 Sec.
3.5 Sec.
1 Sec L, Dbl. U/L
1 Sec.
2nd Accy Lock
Auto Lock On
Auto Lock Off
Auto Lock Off
3rd Accy. UL
Auto UL Dr.
Auto UL All
Auto UL Off
Auto UL Off
4th Headlights
On Arm
On Disarm
On Both
O f f
Both
5th Passive Locks
Passive
Active
Active
6th Passive/Active Arm
Passive Arm
Active Arm
Active Arm
7th Black/Blue (Aux O/P)
Single Pulse
As Feature #1
Single
8th Siren/Horn
Siren/Horn
Siren Only
Horn Only
Siren/Horn
9th Horn Chirp
10mS
16mS
30mS
16mS
10th Override Method
Custom Code
Valet
Valet
11th Two Step Unlock
On
O f f
O f f
12th Chirp Delete From Tx
On
O f f
O f f
To program these selectable features;
Action
System Response
Turn ignition on
No response
Press and release the valet switch 3 times
1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off
Short chirp, then long chirp
First
Then turn the ignition back On
1 chirp = 1 second door locks
Press transmitter Lock button to change
2 chirps = 3.5 second door locks
Press transmitter Lock button to change
3 chirps = 1 sec. lock, dbl 1 sec. unlock
o r
Second
Press and release the valet switch
2 chirps = auto locks off
Press transmitter Lock button to change
1 chirp = auto locks on
o r
Third
Press and release the valet switch
3 chirps = auto unlock off
Press transmitter Lock button to change
1 chirp = auto unlock drivers door only
Press transmitter Lock button to change
2 chirps = auto unlock all doors
o r
Fourth
Press and release the valet switch
3 chirps = headlight output when arming and disarming
Press transmitter Lock button to change
4 chirps = headlight output off
Press transmitter Lock button to change
1 chirp = headlight output when arming
Press transmitter Lock button to change
2 chirps = headlight output when disarming
o r
Fifth
Press and release the valet switch
2 chirps = active locks
Press transmitter Lock button to change
1 chirp = passive locks
o r
Sixth
Press and release the valet switch
2 chirps = active arming
Press transmitter Lock button to change
1 chirp = passive arming
o r
Seventh
Press and release the valet switch
2 chirps =
Hardwire
Press transmitter Lock button to change
1 chirp =
Hardwire
o r
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Eighth Press and release the valet switch 1 chirp = siren and horn output Press transmitter Lock button to change 2 chirps = siren output only Press transmitter lock button to change 3 chirps = horn output only o r Ninth Press and release the valet switch 2 chirps = horn chirp output 16mS Press tran...
YELLOW Wire: Starter OutputCareful consideration for the connection of this wire must be made to prevent the vehicle fromstarting while in gear. Understanding the difference between a mechanical and an electricalNeutral Start Switch will allow you to properly identify the circuit and select the corr...
