Audiovox 128-8117 - Manual

Audiovox 128-8117

Audiovox 128-8117 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 3 – PROTECTION WHILE THE SYSTEM IS ARMED; second alarm cycle, attracting visual attention to the vehicle.; WHILE THE SYSTEM IS SOUNDING
  • Page 5 – Programming Your Custom Override Code:; sequence. Turn the ignition switch to the on position.
  • Page 6 – Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.); ELIMINATING THE NORMAL ARM/DISARM CHIRPS
  • Page 7 – REMOTE PANIC OPERATION; seconds. The alarm will immediately sound.; IGNITION CONTROLLED LOCK / UNLOCK
  • Page 8 – SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS
  • Page 9 – Manuel de l’utilisateur; Système de sécurité télécommandé à 3 boutons avec détecteur
  • Page 11 – PROTECTION PENDANT QUE LE SYSTÈME EST ARMÉ
  • Page 12 – TANDIS QUE LE SYSTÈME RETENTIT
  • Page 13 – eu lieu par l’une des portes du véhicule.; INTERRUPTEUR VALET; allumé, activez une fois le commutateur de valet.
  • Page 14 – IINTERRUPTEUR VALET; commutateur à boutonpoussoir de 1 à 9 fois.
  • Page 15 – UN EXEMPLE DE LA FAÇON PROGRAMMER LA PRIORITÉ DÉSARMENT CODE:; clé de contact à la position de la sur arrêt, puis sur marche.
  • Page 16 – marche alors le véhicule.; ÉLIMINATION DES TONALITÉS NORMALES D’ARMEMENT / DÉSARMEMENT; ensuite la clé de contact sur marche puis sur arrêt.
  • Page 18 – RÉCAPITULATIF DES FONCTIONS DU SYSTÈME; INDICATEURS LUMINEUX — DEL DU TABLEAU DE BORD
  • Page 19 – THIS PAGE LEFT BLANK INTENTIONALLY
Loading the manual

128-8117

1 of 20

-1-

3 Button Remote Security System with

2 Stage Shock Sensor & Starter Disable

Model APS-255a

Owner’s Manual

FEATURES :

Š

2 Three Button Code Hopping RF Transmitters

Š

Three Channel Code Learning Receiver (capable of accepting 4 transmitters)

Š

Selectable Manual Override Mode

Š

Remote Panic in all modes

Š

Protected Valet

Š

7 Function LED -(Light Emitting Diode) - Arm / Disarm / Zone1, 2, 3 / Valet / Arming

Š

Intrusion Alert with Memory

Š

Audible Arm / Disarm / Defective Zone / Tamper Confirmation

Š

Instant Siren Activation

Š

Low Current Horn Output

Š

Starter Disable

Š

True Last Door Arming (hardwire only)

Š

Defective Zone By - Pass

Š

Hardwire or Voltage Sense Selectable

Š

Active or Passive Arming Selectable

Š

Programmable Auto Lock On / Off

Š

Programmable Auto Unlock, Drivers Door All Doors On / Off

Š

Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L

Š

Programmable Active or Passive Door Locks

Š

User Programmable Permanent Chirp Delete

Š

On Command RF Chirp Delete from Transmitter (Software Selectable)

Š

6 Tone Multi - Tone Siren

Š

Additional Negative Trigger Input

Š

RF Inhibit with ignition on

Š

Parking Light Flasher

Š

Plug In Dual Stage Shock Sensor

OPTIONS :

Š

Remote Trunk Release

Š

Remote Keyless Entry

Š

Illuminated Entry

Š

Multiple Vehicle Capable

Š

Remote Starter

Š

Remote Power Window Roll Up

Š

Remote Garage Door Interface

Š

Two Step Unlock Configurable

From 255CH Revised to mention new PBLED 5/15/06
Add New Transmitters 07S3BP

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - PROTECTION WHILE THE SYSTEM IS ARMED; second alarm cycle, attracting visual attention to the vehicle.; WHILE THE SYSTEM IS SOUNDING

128-8117 3 of 20 -3- Page 3 PROTECTION WHILE THE SYSTEM IS ARMED ; Opening any protected door, hood, or trunk lid will cause the alarm to immediately sound. The alarm will continue to sound for 30 seconds, then stop and continue tomonitor all protected entry points. If the thief left a door opened, ...

Page 5 - Programming Your Custom Override Code:; sequence. Turn the ignition switch to the on position.

128-8117 5 of 20 -5- Page 5 and remote door locks will remain operational. To use the valet mode, the system must firstbe disarmed either by using your keychain transmitter, or by activating your personalizedmanual override code.1. Enter the vehicle, and turn the ignition key to the on position.2. P...

Page 6 - Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.); ELIMINATING THE NORMAL ARM/DISARM CHIRPS

128-8117 6 of 20 -6- then 5 seconds during any of the above steps, the unit will revert back to thelast successfully stored code. Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52” you would do thefollowing: 1. Disarm the system by use of the transmi...

Other Audiovox Models