AT&T ATTTL92273 - Manual

2 Getting started Quick reference guide - handset CHARGE light On when the handset is charging in the telephone base or charger. Softkeys (2) Press to select the menu item displayed above the key.While in a menu, press to select an item or save an entry or setting. CELL 1/ CELL 2 Press to make or an...

4 Getting started Quick reference guide - handset PUSH TO TALK Press to display the PTT menu to begin a PTT call (page 57).Press and hold to begin a one-to-group broadcast when the handset is not in use (page 58). • • Feature menu Play messagesAnswering sysDirectoryCaller ID logIntercomBluetoothRing...

5 Getting started Installation Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (page 9). For optimum range and better reception, place the telephone base in a...

6 Getting started Telephone base and charger installation Install the telephone base and charger as shown below.The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 9 for details. Telephone base installation Charger installation IMPOR...

7 Getting started Battery installation and charging Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or ...

8 Getting started Step 1 Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 2 Align the cover flat against the battery compartment, then slide it upwards until it clicks into...

9 Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to attach to a standard dual-stud telephone wall mounting plate. If you do not have this wall mounting plate, you can purchase one ...

10 Getting started Installation options Hold the cords to the side of the telephone base. Align the upper slots on the back of the telephone base just above the upper tabs (marked A ) of the wall mount bracket. Make sure the lower slots of the telephone base are also aligned above the lower tabs (ma...

11 Getting started Bundle the telephone line cord and power adapter cord neatly with twist ties. Place the bundled cords into the space behind the telephone base. 5. Installation options Wall mount to tabletop installation To change the telephone base from the wall mount position to tabletop positio...

12 Bluetooth Introducing Bluetooth Your new AT&T TL92273/TL92373/TL92473 telephone system with Bluetooth wireless technology has the following features: Pair up to 4 Bluetooth enabled devices (cell phones or headsets) with the telephone base.Connect a maximum of 2 cell phones to make and receive...

13 Bluetooth Introducing Bluetooth IMPORTANT INFORMATION After plugging in the telephone base, wait at least 20 seconds before connecting a Bluetooth device. The screen shows Bluetooth system busy if you try to connect too soon.Refer to the user's manual of your Bluetooth enabled cell phone or heads...

14 Bluetooth Introducing Bluetooth Charge your cell phone while it is connected to the telephone base. Your cell phone's battery discharges faster while it is connected to the telephone base via Bluetooth wireless technology.Monitor your cell phone's usage, because minutes may be deducted from your ...

15 Bluetooth Glossary of terms Below are some terms used in this user’s manual to help you become familiar with using your Bluetooth devices and your new AT&T telephone system. Active device slots - the Device list has two active slots for two cell phones, or one cell phone and one headset. When...

16 Bluetooth Bluetooth setup To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. The TL92273/TL92373/TL92473 can then be used to make or answer calls on the cell phone line. Blueto...

17 Bluetooth Bluetooth setup Press NEXT to turn on the telephone base discoverable mode. The screen displays Set cell to search base: AT&T DECT 6.0 PIN: 0000 . Promptly turn on the Bluetooth feature of your cell phone and search for or add new devices. Once your cell phone finds your AT&T ph...

18 Bluetooth Bluetooth setup Add a headset Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Refer to your headset user's manual to learn how to search for or add new Bluetooth devices. To pair and connect a headset:Using a cordless hands...

19 Bluetooth Bluetooth setup Set your headset to discoverable mode (refer to the user’s manual of your headset), then press NEXT . The screen displays Searching for Bluetooth headsets... All devices that are connected to the telephone base are temporarily disconnected. When the screen displays the f...

20 Bluetooth Bluetooth setup Auto connection When an active device moves within Bluetooth range of the telephone base, or is turned on within range, the telephone base tries to connect to the device. When the device moves out of range, it is disconnected. Your device might make a connect or disconne...

21 Bluetooth Bluetooth setup Review the active device list Press MENU on the handset when it is not in use. Press CID or DIR to highlight Bluetooth , then press SELECT . Press CID or DIR to highlight Device list , then press SELECT . Connect/disconnect an active device While in the active devices me...

22 Bluetooth Bluetooth setup Remove a device When you already have the maximum of 4 paired devices on the device list and you want to add another device, you must first delete a device from the device list. To remove a device: Press MENU on the handset in idle mode to enter the main menu.Press CID o...

23 Bluetooth Bluetooth setup Replace an active device If you already have two active devices on the device list and you want to activate a different device, you must deactivate one of the two active devices. To replace an active device: Press MENU on the handset when it is not in use. Press CID or D...

24 Bluetooth Bluetooth setup Download directory You can download up to 4 cell phone directories (phonebooks) to your TL92273/TL92373/TL92473 telephone system via Bluetooth wireless technology. Each downloaded directory can store up to 1,500 entries.Before downloading a directory, make sure the cell ...

25 Bluetooth Bluetooth setup Your cell phone may require you to press a key to confirm the directory download.Your cell phone may require a passcode. In this case the handset screen displays Check cellular. ENTER PASS CODE. Enter the cell phone passcode into the handset and press SET to save. If the...

26 Bluetooth Bluetooth setup setup Interruption to directory download If you are downloading a directory from a cell phone and the phone receives a call, the download process stops and all handsets display Download fail . When you try to view the downloaded directory, the handset displays Last Downl...

27 Bluetooth Bluetooth setup Change PIN You are required to enter a PIN when establishing a Bluetooth connection. The default PIN of your telephone base is 0000 . To change the PIN: Press MENU on the handset in idle mode to enter the main menu.Press CID or DIR to highlight Bluetooth , then press SEL...

28 Handset settings Use the menu to change the telephone settings. Press MENU when the cordless handset is not in use to enter the main menu.Press CID or DIR to scroll to the feature to be changed. When scrolling through the menu, the selected menu item is highlighted.Press SELECT to select the high...

29 Telephone settings Handset settings Ringer tone You can select the ringer tones for incoming home and cell calls. Press MENU in idle mode. Press CID or DIR to highlight Ringers , then press SELECT . Press CID or DIR to highlight Ringer tone , then press SELECT . Press CID or DIR to highlight All ...

30 Telephone settings Handset settings Set date and time The answering system announces the day and time of each message prior to playing it. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. If you do not want to set the date and time auto...

31 Telephone settings Handset settings Caller ID announce The caller ID announce feature lets you know who’s calling without having to look at the display. When you have an incoming call, the handset and/or base speaks “Call from...” and the name of the caller based on the directory or caller ID inf...

32 Telephone settings Handset settings Set speed dial voicemail number This feature lets you save your voicemail number for quick access when you press and hold the 1 key. To set your voicemail number: Press MENU in idle mode. Press CID or DIR to highlight Settings , then press SELECT . Press CID or...

33 Telephone settings Handset settings Voicemail (visual message waiting) indicator If you subscribe to a voicemail service offered by your telephone service provider, New voicemail and the icon appear on the handset screen when you have new voicemail messages. Contact your service provider for more...

34 Telephone settings Handset settings Key tone The handset are set to beep with each key press. You can adjust the key tone volume or turn it off. If you turn off the key tone, there are no beeps when you press keys. Press MENU in idle mode. Press CID or DIR to highlight Settings , then press SELEC...

35 Telephone settings Handset settings Home area code If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID history only displays the seven digits of...

36 Telephone settings Handset settings Cell area code Most cell phone entries are stored in a 10-digit format. If all of your cell phone entries are stored this way, you do not need to program your cell area code.If your cell phone stores entries in a 7-digit format, we recommend that you program yo...

37 Telephone settings Handset settings Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. Press MENU in idle mode. Press CID or DIR to highlight Settings , then press SELECT . Press CID or ...

38 Telephone settings Handset settings QUIET mode When QUIET mode is turned on, the telephone silences all sounds during the set period of time (1-12 hours). However, the handset locator paging tone and any sound-generating operations initiated by users, such as making calls using the speakerphone o...

40 Telephone operation Telephone operation Make, answer or end a home callTo make a home call: Press HOME/ FLASH or / SPEAKER , then enter the telephone number. To predial a home call: Enter the telephone number, then press HOME/ FLASH or / SPEAKER . To answer a home call: Press HOME/ FLASH , / SPEA...

41 Telephone operation Telephone operation To transfer a call from a handset to a Bluetooth headset: Press OPTION during a home line call. Press CID or DIR to highlight Use BT headset , then press SELECT twice. The screen displays Transferring audio to Headset A , the message disappears if the call ...

42 Telephone operation Telephone operation Make, answer or end a cell call The TL92273/TL92373/TL92473 can be used to make or answer calls on the cell line. You can connect a maximum of 2 Bluetooth enabled cell phones to the telephone base. Both cell phones can be used on cell calls at the same time...

43 Telephone operation Telephone operation Call waiting on the cell line If you subscribe to call waiting service from your cell phone service provider, you hear a beep if someone calls while you are already on a call. Press CELL 1 or CELL 2 to put your current call on hold and take the new call.Pre...

44 Telephone operation Telephone operation Cell phone voicemail If you have voicemail service active on your cell phone, and you do not answer the incoming cell call, the call is answered by your cell phone’s voicemail. Contact your cell phone service provider for more information about voicemail se...

45 Telephone operation Telephone operation Conference home and cell calls When you have calls established on the home and cell lines, you can create a 3-way conference. To conference both home and cell calls: Press OPTION . Press CID or DIR to highlight Conference . Press SELECT . To select an optio...

46 Telephone operation Telephone operation Handset speakerphone During a call, press /SPEAKER to switch between the speakerphone and normal handset use. Press OFF/ CACNEL , or return the handset to the telephone base or charger to hang up. Last number redial Each handset stores the last 10 dialed nu...

47 Telephone operation Telephone operation The handset displays EDIT NUMBER . Use the dialing keys to edit the number, if necessary. Press MUTE /DELETE to erase a digit. Press and hold MUTE /DELETE to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL /...

49 Telephone operation Options while on calls Volume control While on a call or message playback, you can press DIR /VOLUME to increase or CID /VOLUME to decrease the listening volume on the handset. If it is a cell call and the volume is too loud, too quiet or drops out, try changing the volume on ...

50 Telephone operation Options while on calls Hold You can place any call on hold. You hear an alert tone at the telephone base if you have not taken the call off hold after 14 minutes. You hear another alert tone at the telephone base 30 seconds later. At 15 minutes on hold, the call on hold automa...

51 Telephone operation Options while on calls Chain dialing Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or acc...

52 Intercom Use the intercom feature for conversations between two handsets.You can buy additional expansion handsets (AT&T model TL90073, sold separately) for this telephone system. You can register up to 12 handsets to the telephone base. To initiate an intercom call Press MENU in idle mode. P...

53 Multiple handset Intercom To end an intercom call at the destination handset: Press END , OFF/ CANCEL or place either handset back in the telephone base or charger. Both handsets display Intercom ended . NOTES: You can cancel the intercom call before it is answered by pressing OFF/ CANCEL or END ...

54 Multiple handset Call transfer using intercom Use the intercom feature to transfer an outside call to another system handset or the telephone base. To transfer an outside call: When on an outside call, press OPTION . Press CID or DIR to highlight Intercom , then press SELECT . The call is automat...

55 Multiple handset Call transfer using intercom From this intercom call, you have the following options: You can transfer the call. Press OPTION and then press SELECT to select Transfer on the calling handset. Your screen shows Call transferred . The other handset automatically connects to the outs...

60 Multiple handset Push-to-talk (PTT) Change a one-to-one PTT call to an intercom call You can convert a one-to-one PTT conversation to an intercom call. When your handset displays Press and hold [PTT] to talk , press INTCOM . Your handset displays Switch to Intercom? Press SELECT to confirm. If yo...

61 Multiple handset Push-to-talk (PTT) Answer an incoming call during PTT When you receive an incoming outside call during PTT, there is a call waiting tone. The caller ID is displayed with PTT screen, alternately. During a one-to-one PTT call, press HOME/ FLASH , CELL 1 or CELL 2 on the originating...

62 Directory About the directory The home directory stores up to 200 entries with up to 30 digits for each phone number and 15 characters for each name. Each of the downloaded directories stores up to 1,500 entries with up to 30 digits for each phone number and 15 characters for each name. Directory...

63 Create and review entries Create a new entry in the home directory Press MENU in idle mode . Press CID or DIR to highlight Directory , then press SELECT . Press OPTION to select Home. Press SELECT to choose Add contact . Use the dialing keys to enter a telephone number (up to 30 digits) when the ...

64 Directory Create and review entries NOTE: When entering a name in the directory, the first letter of each word is automatically capitalized. D i a li n g keys C h a r ac te r s by n u m b e r o f key p re s s e s 1 2 3 4 5 6 7 8 9 10 11 1 1 . - , ( ) * # & / , 2 A B C a b c 2 3 D E F d e f 3 ...

65 Directory Create and review entries To add a predialed telephone number to the directory You can save a predialed telephone number to the directory. Enter the telephone number in idle mode (see Step 5 in Create a new entry in the home directory on page 63). Press SAVE to move on to the number (se...

66 Directory Create and review entries Review the directory Entries are sorted alphabetically. Press DIR in idle mode. Press CID or DIR to highlight a directory, then press REVIEW . Press CID or DIR to browse. -OR- Press MENU on the handset in idle mode to enter the main menu . Press CID or DIR to h...

67 Directory Create and review entries Search by name You can use the enhanced 3-character search to find your contacts quickly and efficiently. Press DIR in idle mode. Press CID or DIR to highlight the desired directory, then press REVIEW . Press CID or DIR to browse through the directory. When an ...

68 Directory Directory Edit a directory entry You can edit any directory entry. However, be aware that if you download a directory from a cell phone again, the directory is erased and replaced with the current cell phone directory. If you have edited the downloaded entries on the TL92273/TL92373/TL9...

70 About caller ID This product supports caller ID services provided by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Caller ID from the home line allows you to s...

71 Caller ID Caller ID operation How the caller ID history (caller ID log) works The telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room ...

72 Caller ID Caller ID operation Review the caller ID log Review the caller ID history to find out who called, to easily return a call, or to copy the caller’s name and number into your directory. Caller ID log empty appears if there are no records in the caller ID log. When a handset is in idle mod...

74 Caller ID Caller ID operation Save a caller ID log entry to the directory Caller ID log entries can only be saved to the Home directory. Select a desired entry in the caller ID log (see Review the caller ID log on page 72).When the desired entry appears, press # (pound key) repeatedly to show dif...

75 Caller ID Caller ID operation To delete a single entry Select a desired entry in the caller ID log (see Review the caller ID log on page 72).When the desired entry is displayed, press MUTE /DELETE . The handset shows the previous caller ID log entry. You hear a confirmation tone. To delete all en...

76 Caller ID Caller ID operation Reasons for missing caller ID information There are occasions when other information or no information shows for various reasons: On-screen message Reason PRIVATE NAME The caller prefers not to show the name. PRIVATE NUMBER The caller prefers not to show the phone nu...

77 Answering system settings Use the answering system menu of a system handset to set up the announcement message, turn the answering system or message alert tone on or off, activate call screening, or change the number of rings, remote access code or message recording time. If you turn off the answ...

78 Answering system Answering system settings To record a new outgoing announcement: Press MENU in idle mode. Press CID or DIR to scroll to Answering sys , then press SELECT . Press SELECT again to select Announcement . Press SELECT to select Record annc . The system announces, “Record after the ton...

79 Answering system Answering system settings Answer on/off If you turn the answering system on, it answers calls and records messages only on the home line. If your paired cell phone has voicemail, callers can leave messages with that voicemail service.If your answering system is turned off and you...

80 Answering system Answering system settings Call screening The call screening feature lets you listen at the telephone base to a caller leaving a message. While monitoring an incoming message, you can answer the call by pressing HOME/ FLASH or /SPEAKER on the handset . To turn call screening on or...

81 Answering system Answering system settings Number of rings You can set the answering system to answer an incoming call after two, three, four, five, or six rings. You can also select toll saver, which is explained below. By default, the answering system answers an incoming call after four rings. ...

82 Answering system Answering system settings Remote access code To access your answering system remotely from any touch-tone phone, you need to enter a two-digit number (00-99). By default, the remote access code is 19. To change the remote access code: Press MENU in idle mode. Press CID or DIR to ...

83 Answering system Answering system settings Message alert tone When the message alert tone is set to On , and there is at least one new message, the telephone base beeps every 10 seconds. The tone stops when all new messages have been reviewed. By default, the message alert tone setting is Off . T...

85 Answering system About the answering system Answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those recorded on its built-in answering system and those recorded in your service provider’s voicemail (fees may apply). Your telephone’s b...

86 Answering system About the answering system Message capacity The answering system can record and store up to 99 messages. Each message can be up to 3 minutes in length depending on the message length set. The total storage capacity for the announcement, messages and memos is approximately 14 minu...

87 Answering system About the answering system Call intercept When a caller is leaving a message on your answering system, you can stop recording and talk to the caller by pressing HOME/ FLASH or /SPEAKER on the handset. Temporarily turning off the message alert tone Pressing any telephone base key ...

88 Answering system Message playback On the telephone base, if you have new messages, the telephone plays only the new messages in chronological order. If there are no new messages, the telephone plays back all messages in chronological order.On the handset, if you have both new and old messages, yo...

89 Answering system Message playback When messages are playing on a cordless handset: Press /SPEAKER to play the messages through the handset earpiece. Press /SPEAKER again to return to playing messages through the speakerphone.Press CID /VOLUME/ DIR to adjust the speakerphone volume. Press SKIP to ...

90 Answering system Message playback Delete all old messagesUsing the telephone base: Press X/DELETE when the phone is not in use. The telephone announces, “To delete all old messages, press DELETE again.” Press X/DELETE again. All previously reviewed messages are erased and the telephone announces,...

91 Answering system Recording and playing memos Memos are messages you record as reminders for yourself or others using the same answering system. You can record your own memos using a system handset or the telephone base. Play and delete them the same way as incoming messages. Record a memoUsing a ...

92 Answering system Base message counter displays Message window displays 0 No messages. 0 (flashing) The time and date need to be set. 0-6 The telephone base ringer level while adjusting. 1-8 The telephone base speaker volume level while adjusting. 1-99 Total number of old messages and memos record...

93 Answering system Remote access You can reach your answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access the answering system Dial your telephone number from any touch-tone telephone.When the system plays your announcement, enter the two-...

95 Adding and registering handsets/headsets Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model TL90073, sold separately) or up to 10 cordless handsets and 2 cordless headsets (sold separately). Visit www.telephones.att.com/headsets for a list of compatible DECT 6.0 cordle...

96 Appendix Deregister handsets You may need to deregister your handsets if: You have 12 registered handsets and need to replace a handset. -OR- You wish to change the designated handset number of your registered handsets. You must first deregister ALL handsets, and then register each handset you wi...

97 Appendix Handset screen icons HOME line - On steadily when the home line is in use or there is an incoming home call. 1 2 CELL line- On steadily when a cell line is in use or there is an incoming cell call. 1 2 Bluetooth connected devices - There are Bluetooth connected devices on the active devi...

98 Appendix Alert tones Handset alert tones One short beep Tone of each key press, if key tone is turned on. One long beep Indication to begin recording a message, memo or announcement. Two short beeps You are pressing CID or DIR when the volume is already at its highest or lowest setting. -OR- You ...

99 Appendix Handset indicator lights CHARGE light On when the handset is charging in the telephone base or charger. Lighted keypad On when the handset is lifted from the telephone base or charger.On when a key is pressed. /SPEAKER light On when the speakerphone is in use. • • Telephone base indicato...

100 Appendix Screen messages Display screen messages Number already saved The telephone number you have entered is already stored in the directory. Bluetooth system busy You are trying to make a cell call or access the Bluetooth menu when the Bluetooth link is already being used. Caller ID log empty...

104 Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com , or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . I cannot pair ...

105 Appendix Troubleshooting I cannot connect my cell phone with the telephone base. Make sure that the Bluetooth function of your cell phone is turned on. See the user’s manual of your cell phone for more information.Make sure that your Bluetooth cell phone is not connected to any other Bluetooth d...

106 Appendix Troubleshooting My cell phone disconnects with the telephone base. Turn off your cell phone, then turn it on again.Make sure that you are not using your cell phone when on a cell call. My cell phone is connected to the telephone base, but I cannot make a cell call. Make sure that your c...

107 Appendix Troubleshooting I cannot download contacts from my cell phone to my TL92273/TL92373/TL92473. Make sure that your cell phone is paired and connected to the base. Make sure you place your cell phone next to the base while downloading. If your cell phone does not support the download, you ...

108 Appendix Troubleshooting The phone doesn’t play my iPhone ringtone when there is an incoming call. Make sure the operating system of your iPhone is iOS 4.1 or later.Make sure you have turned on the Cell ringer feature (page 27). The iPhone ringtone played is unclear or too loud with noise. The q...

109 Appendix Troubleshooting I cannot dial out. Try all the suggestions in I cannot get a dial tone on page 108 . Make sure you have a dial tone before dialing. The handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialin...

111 Appendix Troubleshooting The batteries do not hold a charge. If the handset is in the charger and the charge light does not turn on, refer to The charge light is off (page 115) in this Troubleshooting guide. Charge the battery in the handset for at least 11 hours. For optimum daily performance, ...

112 Appendix Troubleshooting I experience poor sound quality when using the speakerphone. For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up.When using a speakerphone, controlling background noise in your environment is essential...

113 Appendix Troubleshooting My cordless handset does not ring when I receive a call. Make sure that the ringer is not turned off. Refer to Ringer volume on page 28 in this user’s manual.Make sure the telephone line cord is plugged securely into the telephone base and the telephone jack. Make sure t...

114 Appendix Troubleshooting My calls cut in and out while I’m using my cordless handset. Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices...

115 Appendix Troubleshooting The charge light is off. Make sure the power and line cords are plugged in correctly and securely.Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the handset and telephone base to reset.Clean the handset and telephone ba...

116 Appendix Troubleshooting I cannot retrieve voicemail messages. Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (page 85). If you subscribe to voicemail service from your telephone service ...

117 Appendix Troubleshooting The answering system does not answer after the correct number of rings. Make sure the answering system is on. When the answering system is on, ANS ON should show on the handset and the ANS ON/OFF light is lit on the telephone base.If toll saver is selected (page 81), the...

118 Appendix Troubleshooting The answering system does not record messages. Make sure the answering system is on.Make sure the memory of the answering system is not full. When the answering machine memory is full, it does not record new messages until some old messages are deleted. If you subscribe ...

119 Appendix Troubleshooting Common cure for electronic equipment: If the telephone is not responding normally, try resetting the telephone. Do the following in the order listed: Disconnect the power to the telephone base.Disconnect the handset battery, and spare battery, if applicable.Wait a few mi...

120 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the handset down gently.Save the original packing materials to protect your telephone if you ever need to ship it. Avoid...

121 Appendix Important safety information Safety information Read and understand all instructions in the user’s manual. Observe all markings on the product.Avoid using a telephone during a thunderstorm. There might be a slight chance of electric shock from lightning.Do not use a telephone in the vic...

122 Appendix Important safety information Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electr...

123 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the f...

125 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . What does this limited ...

126 Appendix How do you get warranty service? To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111 . In Canada, please dial 1 (866) 288-4268 . NOTE: Before calling for service, please review the user’s manual. A check of the PRODUCT’s cont...

127 Appendix Technical specifications RF frequency band 1921.536MHz — 1928.448MHz Channels 5 Operating temperature 32°F — 122°F 0°C — 50°C Telephone base voltage (AC voltage, 60Hz) 96 — 129 Vrms Telephone base voltage (AC adapter output) 6VDC @400mA Handset battery 2.4 VDC, AAA x 2, Ni-MH Charger vo...

129 Index L Last number redial 46LCD language 29Lights 99Limited warranty 125-126Listening volume 49 M Maintenance 120Make a cell call 42Make a home call 40Memory match 71Memos 91Message alert tone 82Message capacity 86Message playback 88–90Message window displays 92Missed calls 71Mute 49 N Number o...

130 Index U Use a Bluetooth headset 40Using the home and cell lines together 45 V View the directory download information 26 Voicemail 44, 85Volume 28, 49, 88–89 W Wall mounting 9–11Warranty 125-126Website 37 Index

Remote access wallet card The wallet card below lists the commands needed to control your answering system from any touch-tone telephone. Fold here. Cut along dotted line. Action Remote command Play all messages ..................... 1 Play new messages .................. 2 Delete the message .........